Panasonic SC-BTT770 User instructions

VQC8049-2
F1210MH2031
12
1234
12





3

1
FRONT
Lch →
 



Easy Setting Guide
The order of setting
Prepare the speakers Place the speakers
Refer to the rear label of the speaker before connecting the
corresponding cable.
Verify the type of speaker with the label on the rear of the
speaker.
Speakers 
Front speakers FRONT/AVANT
Center speaker CENTER/CENTRE
Surround speakers SURROUND/AMBIOPHONIE
Blu-ray DiscTM Home Theater Sound System
Model No. SC-BTT770
e.g.,
Prepare the
speakers
See below
Place the
speakers
See below
Connect the
cables
See over
Turn on the system
See over
Easy setup
See Easy setup screen
Label each speaker cable by
attaching the numbered sticker
at the position indicated in the
illustration. Be sure to match the
number on each sticker with the
circled number in the illustration.
Connect the speaker cables.
Insert the wire fully, taking care
not to insert beyond the wire
insulation.
: White
: Blue line
e.g., Front speaker Lch
PUSH!
Front
speakers
Surround
speakers
Center
speaker
Subwoofer
STEP 3
STEP 4
STEP 1 STEP 2
WHITE
White
Blue line
Back of the base
Pull the cable straight
along the line and slide
into the groove.
Tighten securely.
Leave about 80 mm (3 5/32)Tighten securely.
Press into the groove.
Front speaker
Stand
Base
speaker
Lch
WHITE
Rch
RED
Rch
GRAY
GREENPURPLE
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
: White
: Blue line
Lch
BLUE
PUSH! GREEN
C
GRAY
RS
RED
R
WHITE
L
PURPLE
SW
BLUE
LS
Wireless system
Surround speakers
(LS, RS)
Recommended
Front speakers
(L, R)
60
120
VQC8049eng.indd2-3VQC8049eng.indd2-3 2011/02/1811:38:242011/02/1811:38:24

3
4
3
1
VIDEO IN
AUDIO OUT
L
R
HDMI
(ARC)
HDMI
OPTICAL
OUT
AUX
FM ANT
Ω
75
SUBWOOFER
3
6 5 2 1
33
RL
ΩΩΩ
CENTER FRONT
SPEAKERS
ENCEINTES
LS / RB LB / RS
SURR
 

WIRELESS LINK
POWER
R6/LR6, AA


LANLAN
OK
RETURN
Easy setup
Would you like to start easy setup?
Voulez-vous amorcer le Réglage facile ?
¿Quiere empezar la Fácil Setup?
No/Non/No
Yes/Oui/Sí
Connect the AC power supply cord to the main unit before connecting to the household
AC outlet.
AC power supply cord with a ferrite core is for the wireless system.
Connect the cables by color or by the numbers indicated in the
illustration to the appropriate terminals on the rear panel of the unit.
Be sure to use the
speaker cables that have
a large connector and
short cable when you
connect the surround
speakers in this
connection.
Wireless system
The main unit shows the model
for the U.S.A. and Canada.
PURPLE GREEN RED WHITE
GRAYBLUE
Connect the cables
For detailed information, refer to the Owner’s Manual.
It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.
FM indoor antenna
(supplied)
Adhesive tape
TV
Turn on the system
Connect the AC power supply cord 2Turn on the TV
Turn on your TV and select the appropriate
video input mode (e.g., VIDEO 1, AV 1, HDMI,
etc.) to suit the connections to this unit.
If the HDMI terminal is labeled “HDMI (ARC)”, you can enjoy TV sound and
pictures with a single HDMI cable.
If the HDMI terminal is not labeled “HDMI (ARC)”, an “Audio cable” or “Optical
digital audio cable” is required to listen to sound from the TV.
Broadband Network Connections
By connecting this unit to the network, you can optimise the internet
features of this unit.
•Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
•When using the wireless LAN function, the LAN cable that
connected to the main unit is not necessary.
Main unit
Internet
Press [, ] to select [Yes/Oui/Sí] and press [OK].
Other connection
Digital
transmitter
Press [ ] to
turn on the
main unit.
Installing batteries
in the remote
control
Press and ensure the
WIRELESS LINK indicator
lights up green.
4The Easy setup starts
The on screen display will guide you through the
steps.
Turn on the system
Surround selector
The surround
selector switch
must be set in the
center position.
Wireless system
Audio connection
For best quality audio, use
the HDMI cable (with an ARC
compatible TV) or an optical
digital audio cable.
If your TV does not support the
above, use the audio cable.
*1
Make sure that this video connection is made to view photos/videos
from the iPod/iPhone.
Video cable*1(not supplied)
HDMI cable (not supplied)
(Recommended for highest quality picture)
Optical digital audio cable (not supplied)
Audio cable (not supplied)
LAN cable
(not supplied)
Broadband router, etc.
If you have any questions contact U.S.A. and Puerto Rico: 1-800-211-PANA (7262)
Mon-Fri 9 am–9 pm (EST) Lunes-Viernes
Sat-Sun 10 am–7 pm (EST) Sabado-Domingo
Canada:
Telephone: [phone]
E-mail link: “Support contact us email” on www.panasonic.ca
Insert fully
until you hear
a click.
AC IN
Main unitWireless system
To a household AC outlet
AC Voltage selector
(For units with PX printed on the packaging)
Before connecting the AC power supply
cord;
Set the voltage at the bottom of
the main unit.
VOLT ADJ
110 127V 220 240V
Use a flat-head screwdriver to move the
voltage selector to the appropriate position
for the area in which this system is used.
AC power
supply cord
(supplied)
VQC8049eng.indd4-5VQC8049eng.indd4-5 2011/02/1811:38:252011/02/1811:38:25