Panasonic SC-BTT775 User instructions

VQC8275
F0111SB0
12 34
12
12





3

1
FRONT
Lch →
 

Easy Setting Guide
The order of setting
Model No. SC-BTT775
Prepare the
speakers
See below
Place the speakers
See below
Connect the
cables
See over
Turn on the
main unit
See over
Easy setup
See Easy setup screen
Prepare the speakers Place the speakers
Refer to the rear label of the speaker before connecting
the corresponding cable.
Verify the type of speaker with the label on the rear of
the speaker.
Speakers 
Front speakers FRONT/AVANT
Centre speaker CENTER/CENTRE
Surround speakers SURROUND/AMBIOPHONIE
e.g.,
GREEN
GREY
C
RS
RED
R
WHITE
PURPLE
BLUE
LS
SW
L
Recommended
Front speakers
(L, R)
60
120
Surround speakers
(LS, RS)
Label each speaker cable
by attaching the numbered
sticker at the position
indicated in the illustration. Be
sure to match the number on
each sticker with the circled
number in the illustration.
Connect the speaker cables.
Insert the wire fully, taking care
not to insert beyond the wire
insulation.
: White
: Blue line
e.g., Front speaker
Lch
PUSH!
Front speakers Surround speakersCentre speakerSubwoofer
STEP 3
STEP 4
STEP 1 STEP 2
WHITE
White
Blue line
Tighten securely.
Leave about 80 mm Tighten securely.
Front/
surround
speaker
Stand
Base
speaker
Lch
WHITE
Rch
RED
Rch
GREY
GREENPURPLE
Press into the groove.
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
: White
: Blue line
Lch
BLUE
PUSH!
Back of the base
Pull the cable straight
along the line and slide
into the groove.
Blu-rayDiscTM Home Theater Sound System
VQC8275eng.indd2-3VQC8275eng.indd2-3 2011/01/1220:42:392011/01/1220:42:39

3
4
3
12 4
VIDEO IN
AUDIO OUT
L
R
HDMI
(ARC)
HDMI
OPTICAL
OUT
SUBWOOFER
3
6 5 2 1 4 3
33
RLR L
ΩΩΩΩ
3
CENTER SURROUND FRONT
Ω
75
AUX
FM ANT

R6/LR6, AA


LAN
OK
RETURN
Easy setup
Would you like to start easy setup?
No
Yes
It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.
Connect the cables by colour or by the numbers indicated in the illustration
to the appropriate terminals on the rear panel of the unit.
Main unit
Main unit
PURPLE GREEN RED WHITE GREY BLUE
Connect the cables For detailed information, refer to the operating instructions.
FM indoor antenna
(supplied)
Adhesive tape
TV
Turn on the main unit
Connect the AC mains lead
Connect the AC mains lead to the
main unit before connecting to the
household mains socket.
AC mains lead (supplied)
To a household mains socket
Turn on the TV
Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this
unit.
Broadband Network Connections
By connecting this unit to the network, you can optimise the
internet features of this unit.
•Use category 5 or above straight LAN cables (STP)
when connecting to peripheral devices.
•When using the wireless LAN function, the LAN cable that
connected to the main unit is not necessary.
Main unit
Press [, ] to select [Yes] and press [OK].
Other connection
Press [ ] to turn
on the main unit.
Installing batteries in the
remote control
The Easy setup starts
The on screen display will guide you through the steps.
Turn on the main unit
Video cable*1(not supplied)
HDMI cable (not supplied)
(Recommended for highest quality picture)
Optical digital audio cable (not supplied)
Audio cable (not supplied)
Audio connection
For best quality audio, use the HDMI
cable (with an ARC compatible TV)
or an optical digital audio cable.
If your TV does not support the
above, use the audio cable.
*1
Make sure that the video cable connection is made
to view photos/videos from the iPod/iPhone.
If the HDMI terminal is labeled “HDMI (ARC)”, you can enjoy TV sound
and pictures with a single HDMI cable.
If the HDMI terminal is not labeled “HDMI (ARC)”, an “Audio cable” or
“Optical digital audio cable” is required to listen to sound from the TV.
LAN cable
(not supplied)
Broadband router, etc.
Internet
VQC8275eng.indd4-5VQC8275eng.indd4-5 2011/01/1220:42:402011/01/1220:42:40