Panasonic SCBT230 - BLU RAY HOME THEATER SYSTEM User instructions

VQC7398
F1209RE0
1
1234
2
1
FRONT
Lch
→




   

Easy Setting Guide
The order of setting
Prepare the speakers
See below
Place the speakers
See below
Connect
the cables
See over
Turn on the
main unit
See over
Prepare the speakers Place the speakers
Step 1
Label each speaker cable by attaching the
numbered sticker at the position indicated in
the illustration. Be sure to match the number
on each sticker with the circled number in the
illustration.
e.g., Front speaker Lch
WHITE
speaker
Connect the speaker cables.
Insert the wire fully, taking care not to insert
beyond the wire insulation.
: White
: Blue line
PUSH!
Step 2
White
Blue line
Refer to the rear label of the speaker before connecting the corresponding
cable.
Verify the type of speaker with the label on the rear of the speaker.
Speakers 
Front speakers FRONT/AVANT
Center speaker CENTER/CENTRE
Surround speakers SURROUND/AMBIOPHONIE
Front speakers Surround speakersCenter speakerSubwoofer
PURPLE GREEN
Lch
WHITE
Rch
RED
Lch
BLUE
Rch
GRAY
Easy setup
See Easy setup
screen
GREEN
C
GRAY
RS
RED
R
WHITE
PURPLE
SW
L
LS
BLUE
Blu-ray Disc Home Theater Sound System
Recommended
Front speakers
(L, R)
Surround speakers
(LS, RS)
60
120
Model No. SC-BT230
e.g.,
VQC7398eng.indd2-3VQC7398eng.indd2-3 2009/12/0811:03:502009/12/0811:03:50

3
4
3
12 4
AC IN
VIDEO IN
AUDIO OUT
L
R
AV IN
OPTICAL
OUT
LAN
AV
OUT
OPT
VIDEO
OUT
AUX
L
R
(ARC)
521
3 Ω 6 Ω 6 Ω
FRONTCENTERSUBWOOFER
R L


643
3 Ω
SURROUND
R L
OPTICAL
21
DIGITAL AUDIO IN
FM ANT
(75
Ω
)

CANCEL
VOL
1 2 3
4 5 6
7 8
0
9
BD/SD
iPod EXT-IN
MUTE
RADIO
ABC DEF
JKL MNO
TUV
GHI
QRS
P
XYZ
W
@.
_,
VOL
TV
INPUT
R6/LR6, AA


5
6Ω
ENTER
LAN
(10BASE-T/
100BASE-TX)
OK
RETURN
Easy setup
Would you like to start easy setup?
Voulez-vous amorcer le Réglage facile ?
¿Quiere empezar la Fácil Setup?
No/Non/No
Yes/Oui/Sí
Connect the cables by color or by the numbers indicated in the illustration to
the appropriate terminals on the rear panel of the unit.
Main unit
Main unit’s speaker
terminals (rear panel)
PURPLE GREEN RED WHITE GRAY BLUE
Connect the cables For detailed information, refer to the operating instructions.
Audio connection
For best quality audio,
use the HDMI cable (with
an ARC compatible TV)
or an optical digital audio
cable.
If your TV does not
support the above, use
the audio cable.
*1Make sure that this
video connection is
made to view photos/
videos from the iPod/
iPhone.
FM indoor antenna
(included) Adhesive tape
TV
Video cable*1(included)
HDMI cable (not included)
(Recommended for highest quality
picture)
Optical digital audio cable (not included)
Turn on the main unit
Connect the AC power supply
cord
Connect the AC power supply cord
to the main unit before connecting to
the household AC outlet.
AC power supply cord
(included)
To a household AC outlet
(AC 120 V, 60 Hz)
Turn on the TV
Turn on your TV and select the appropriate video input
mode (e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the
connections to this unit.
Broadband Network Connections (Optional)
By connecting this unit to the network, you can use the BD-Live and
VIERA CAST features.
Main unit
Shielded LAN cable
(not included)
Modem (Broadband)
•Provided by ISP
Press [, ] to select [Yes/Oui/Sí].
*2If you want to restart the Easy setup:
Refer to “STEP 6: Smart setup / Easy setup” in the operating
instructions.
Broadband router, etc.
Other connection
Audio cable (not included)
Press [ ] to turn
on the main unit.
Installing batteries in the
remote control
The Easy setup starts
The on screen display will guide you through the steps.*2
Turn on the main unit
VQC7398eng.indd4-5VQC7398eng.indd4-5 2009/12/0811:03:512009/12/0811:03:51