Panasonic SCBT730 - BLU RAY HOME THEATER SYSTEM User instructions

VQC7400
F1209RE0
12
1234
12





3

1
FRONT
Lch →


 



SETUP MIC
Easy Setting Guide
The order of setting
Prepare the speakers Place the speakers
Refer to the rear label of the speaker before connecting the
corresponding cable.
Verify the type of speaker with the label on the rear of the
speaker.
Speakers 
Front speakers Front/Avant
Center speaker Center/Centre
Surround speakers SURROUND/AMBIOPHONIE
Blu-ray Disc Home Theater Sound System
Model No. SC-BT730
e.g.,
Prepare the
speakers
See below
Place the
speakers
See below
Connect the
cables
See over
Turn on the system
See over
Smart setup
See Smart setup screen
Label each speaker cable by
attaching the numbered sticker
at the position indicated in the
illustration. Be sure to match the
number on each sticker with the
circled number in the illustration.
Connect the speaker cables.
Insert the wire fully, taking care
not to insert beyond the wire
insulation.
: White
: Blue line
e.g., Front speaker Lch
PUSH!
Front
speakers
Surround
speakers
Center
speaker
Subwoofer
Step 3
Step 4
Step 1 Step 2
WHITE
White
Blue line
Back of the base
Pull the cable straight
along the line and slide
into the groove.
Tighten securely.
Leave about 80 mm (3 5/32)Tighten securely.
Press into the groove.
Front speaker
Stand
Base
speaker
Lch
WHITE
Rch
RED
Rch
GRAY
GREENPURPLE
Insert the wire fully, taking
care not to insert beyond
the wire insulation.
: White
: Blue line
Lch
BLUE
PUSH!
Auto speaker setup microphone (included)
Place the Auto speaker setup microphone at the actual seating
position. (At ear level when seated.)
Main unit’s front panel
GREEN
C
GRAY
RS
RED
R
WHITE
L
PURPLE
SW
BLUE
LS
Wireless system
Surround speakers
(LS, RS)
Recommended
Front speakers
(L, R)
60
120
VQC7400eng.indd2-3VQC7400eng.indd2-3 2009/12/2413:05:532009/12/2413:05:53

3
4
3
12 4
AC IN
AC IN
VIDEO IN
AUDIO OUT
L
R
AV IN
OPTICAL
OUT
LAN
OPT
VIDEO
OUT
AUX
L
R
(ARC)
AV
OUT
521
3Ω6Ω6Ω
FRONTCENTERSUBWOOFER
R L
6


DIGITAL TRANSMITTER
OPTICAL
21
DIGITAL AUDIO IN
FM ANT
(75
Ω
)
SPEAKERS
ENCEINTES
LS / RB LB / RS
SURR

DIGITAL TRANSMITTER
VOL
1 2 3
4 5 6
7 8 9
ABC DEF
JKL MNO
TUV
GHI
QRS
P
XYZ
W
@.
VOL
TV
INPUT
WIRELESS LINK
POWER
R6/LR6, AA


5
6Ω
ENTER
LAN
(10BASE-T/ 100BASE-TX)
OK
RETURN
Smart setup
Would you like to start smart setup?
Voulez-vous amorcer le Réglage intelligent ?
¿Quiere empezar la Smart Setup?
No/Non/No
Yes/Oui/Sí
Connect the cables by color or by the numbers indicated in the illustration to
the appropriate terminals on the rear panel of the unit.
Main unitWireless system
Wireless
system
Main unit’s speaker
terminals (rear panel)
PURPLE GREEN RED WHITEGRAYBLUE
Connect the cables For detailed information, refer to the operating instructions.
FM indoor antenna
(included)
Adhesive tape
TV
Turn on the system
Connect the AC power supply
cord
Connect the AC power
supply cord to the main
unit before connecting
to the household AC
outlet.
AC power supply cord
(included)
To a household AC outlet (AC 120 V, 60 Hz)
Turn on the TV
Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this
unit.
Broadband Network Connections
(Optional)
By connecting this unit to the network, you can use the BD-Live
and VIERA CAST features.
Main unit
Modem (Broadband)
•Provided by ISP
Press [, ] to select [Yes/Oui/Sí].
*2If you want to restart the Smart setup:
Refer to “STEP 6: Smart setup / Easy setup” in the
operating instructions.
Broadband router, etc.
Other connection
Digital
transmitter
Press [ ] to turn on
the main unit.
Installing batteries in the
remote control
Press and ensure the WIRELESS
LINK indicator lights up green.
The Smart setup starts
The on screen display will guide you through the steps.*2
Turn on the system
Surround selector
The surround selector
switch must be set in the
center position.
Wireless system
Audio connection
For best quality audio, use the HDMI cable (with
an ARC compatible TV) or an optical digital
audio cable.
If your TV does not support the above, use the
audio cable.
*1Make sure that this
video connection
is made to view
photos/videos from
the iPod/iPhone.
Video cable*1(included)
HDMI cable (not included)
(Recommended for
highest quality picture)
Optical digital audio cable (not included)
Audio cable (not included)
Shielded LAN cable
(not included)
VQC7400eng.indd4-5VQC7400eng.indd4-5 2009/12/2413:05:552009/12/2413:05:55