
4
English
Safety Precautions
WARNING
■Setup
Small parts can present choking hazard if accidentally
swallowed. Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/sheets to
prevent them from being played with by young children,
creating the potential risk of suffocation.
Do not place the Display on sloped or unstable
surfaces, and ensure that the Display does not hang
over the edge of the base.
• The Display may fall off or tip over.
Install this unit at a location with minimal vibration
and which can support the weight of the unit.
• Dropping or falling of the unit may cause injury or
malfunction.
Do not place any objects on top of the Display.
• If foreign objects or water get inside the Display, a
short-circuit may occur which could result in fire or
electric shock. If any foreign objects get inside the
Display, please consult your local Panasonic dealer.
Transport only in upright position!
• Transporting the unit with its front panel facing upright
or downward may cause damage to the internal
circuitry.
Ventilation should not be impeded by covering
the ventilation openings with items such as
newspapers, table cloths and curtains.
For sufficient ventilation, see page 7.
When installing the Display vertically;
When installing the Display vertically, be sure that
the Power Indicator comes to the downside. Heat is
generated and it may cause fire or damage to the
Display.
Power indicator
Cautions for Wall or Pedestal Installation
• The installation should be performed by an installation
professional. Installing the Display incorrectly may
lead to an accident that results in death or serious
injury. Use the optional Pedestal. (see page 10)
• When installing on a wall, a wall hanging bracket that
conforms to VESA standards must be used.
: VESA 400 × 400
(see page 7)
• Before installation, be sure to check if the mounting
location has enough strength to support the weight
of the LCD display and the wall hanging bracket for
anti drop.
• If you terminate the use of the Display on the Wall or
Pedestal, ask a professional to remove the Display as
soon as possible.
• When mounting the Display on the wall, prevent the
mounting screws and power cable from contacting
metal objects inside the wall. An electric shock may
occur if they contact metal objects inside the wall.
Do not install the product to a place where the
product is exposed to direct sunlight.
• If the unit is exposed to direct sunlight even indoors,
the temperature rise of the liquid crystal panel may
cause malfunction.
■When using the LCD Display
The Display is designed to operate on 220 - 240 V
AC, 50/60 Hz.
Do not cover the ventilation holes.
• Doing so may cause the Display to overheat, which
can cause fire or damage to the Display.
Do not stick any foreign objects into the Display.
• Do not insert any metal or flammable objects into the
ventilations holes or drop them onto the Display, as
doing so can cause fire or electric shock.
Do not remove the cover or modify it in any way.
• High voltages which can cause severe electric shocks
are present inside the Display. For any inspection,
adjustment and repair work, please contact your local
Panasonic dealer.
Ensure that the mains plug is easily accessible.
The mains plug shall be connected to a mains
socket outlet with a protective earthing connection.
Do not use any power supply cord other than that
provided with this unit.
• Doing so may cause short-circuit, generates heat,
etc., which could cause electric shock or fire.
Do not use the supplied power supply cord with any
other devices.
• Doing so could cause electric shock or fire.
Securely insert the power supply plug as far as it
will go.
• If the plug is not fully inserted, heat may be generated
which could cause fire. If the plug is damaged or the
wall socket is loose, they shall not be used.
Do not handle the power supply plug with wet
hands.
• Doing so may cause electric shocks.
Do not do anything that may damage the power
cable. When disconnecting the power cable, pull on
the plug body, not the cable.
• Do not damage the cable, make any modifications
to it, place heavy objects on top of it, heat it, place it
near any hot objects, twist it, bend it excessively or
pull it. To do so may cause fire and electric shock. If
the power cable is damaged, have it repaired at your
local Panasonic dealer.