Panasonic PT-51G35 User manual

Panasonlc o
Color Video Projection System
Operating Instructions PT-51G35
For assistance, pEeasecall: 1-800-211-PANA (7262) or TQB2AA0341 000215
send e-mad to: consumerproducts@panason,c.com PRINTED IN USA

WARNING
To move set, push from left side of set. Casters on right side
do not pivot in all directions. Set can tip over if moved from
right side, with risk of personal injury.
ADVERTENClA
Para mover el conjunto, empuje desde el lado izquierdo del
mismo. Los rolanas de la derecha no son pivotantes en todas
las direcciones. El conjunto se puede tumbar si se 1o mueve
desde el lado derecho, corriendo asi el riesgo de sufrir dafios
personales.
Mise en garde
Lors du d6placement du t616viseur,le pouser sur son c6t6
gauche. Les roulettes du c6t_ droit ne pouvant toumer dans
toutes les directions, l'appareil pourrait tomber s'il est pouss6
de ce c6t6 et causer ainsi des risques de blessure.
W_
Ce_ain audio featuRs of this product manufacture under alicense from Desper Products. Inc.
Spatiatize/_ and the cixcle-in-square device and wodemarks owngd by Desper Products, Inc.
Spatializer U.S. Patents are: 4,308,423; 4,355,203 and 5,412,731.
WARNING
The lightningflash with arrow
head within a triangle is
intended to tell the user that
parts insidethe productare a
dsk of electnc shock to parsons.
"Pnsexclamationpointwithina
triangleis intendedto tell the
user that importantoperating
andservicinginstructionsare in
thepaperswiththe appliance
WARNING: Topreventfire or shockhazard,donotexposethisappliance
torainor moisture. ml

TABL EOF CONTENT S
Table of Contents
Congratulations ........................................................ 3
Customer Record ..................................................................... 3
Care and Cleaning ................................................................... 3
Specifications ........................................................................... 3
Installation ................................................................. 4
Television Location................................................................... 4
Optional Cable Connections ..................................................... 4
AC Power Supply Cord ............................................................ 4
Cable /Antenna Connection .................................................... 4
Optional Equipment Connections ............................................. 5
VCR Connection ....................................................................... 5
Cable Box Connection .............................................................. 6
VCR and Cable Box Connection .............................................. 7
Amplifier Connection (To Audio Amp) ..................................... 8
Picture In Picture (PIP) Operation ........................... 9
Basic PIP Operation ................................................................ 9
PIP Operation with aCable Box .............................................. 9
Roller Guide MenuTMNavigation............................ 10
Remote Control Guide............................................................ 10
Roller Guide Feature Chart.................................... 11
Special Features .............:....................................... 14
Menu Languages .................................................................... 14
Program Channels ................................................................. 14
Closed Captioning .................................................................. 14
Closed Caption on Mute ......................................................... 15
Convergence .......................................................................... 15
Sleep Timer ............................................................................ 17
Timer 1 and 2 ......................................................................... 17
Picture Adjustments ............................................................... 18
Favorite Channels and Captions ............................................ t 8
Lock ....................................................................................... 19
Troubleshooting Chart ........................................... 20
im
Read these instructions completely before operating rv,
Contents are subject to change without notice or obligation.
Copyright 2000 by MatsushitaElectricCorporation ofAmerica. Allrightsreserved.
Unauthorizedcopyingand distributionis a violationoflaw,

CONGRA TULA TIONS
Congratulations
Your new Projection Television (PTV) features state-of-the-art technology for high
quality picture and sound with complete audio/video connections for your home
theater system. Your PTV is designed to give you many years of enjoyment. It was
thoroughly tested and tuned at the factory for best performance.
Customer Record
The modeland serial number of this product are located on the back of the IV. You should
note the model and serial number in the space provided and retain as a permanent record
of your purchase. This will aid in identification in the event of theft or loss. Product
registratonfor U.S. customers is available at: www.prodreg.com/panasonic.
Model
Number
Care and Cleaning
Specifications
Serial
Number
Projection Screen (Turn PTV Off)
The projectionscreen isa highprecisionlens systemwhichdoes notattractdust.
[3 Occasional dusting with a feather duster or very soft brush using only up and down
motions.
•Never rub acrossthe screen in sidetoside motion.
OInfrequentwashingwith a very weak solutionof dishwashingsoap, usinga soft, lint-free
cleancloth.
• DO NOT USE ABRASIVE CLEANERS.
•Do notusewindowor glasscleaner,laundry detergent,automaticdishwashersoap,or
abrasivecleaners.
•Do notuse alcohol,ammonia,or petroleumbased products.
OAvoidexcessivemoistureandwipedry.
•Preventsolutionfrom runningintothe receiverbelow.
r'l Avoidbumpingor scrapingthe screen.
Protectthe veryfine groovesonthe screenwhichtransportthe picture.
Note: Do notsprayany typeofcleaningfluiddirectlyon thescreen.
Cabinet and Remote Control
t'l For cabinets and remote control, use a soft cloth dampened with water or a mild
detergent solution. Avoid excessive moisture and wipe dry.
O Do not use benzene, thinner or other petroleum based products.
Power ,5ource
PT-51G35 (2.7A) 120VAC, 60Hz
Channel Capability. 181 VHF-12; UHF-56;Cable-125
3 Video'Input Jacks 1Vp-p,75 Ohm, PhonoJackType
6 Audio Input Jacks 500mV RMS 47KOhm
To Audio AMP Jack 0-2.0 RMS 4,7KOhm
S-Video Input Jacks S-Video(Y-C) Connector
Specifications are subject to changewithoutnotice or obligation. m

INSTALLA TION
Installation
Television Location
This unit can be used as an entertainment center. Consult your dealer for available options.
0 Avoid excessive sunlight or bright lights, including reflections.
0 Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.
£3 Fluorescent lighting may reduce remote control transmitting range.
17 Keep away from magnetic equipment, including motors, fans and external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
0 Use 75-ohm coaxial shielded cables.
0 Use appropriate input and output connectors, that match your component connectors.
E3 Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK MATCHWIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLYINSERT. DO NOT USEA PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE
NON-POLARIZED,THE USE OF AN AC ADAPTORCONNECTOR MAY
BE NECESSARY.
Polarizedplug
Non-Poladzedplug
Cable /Antenna Connection
For proper reception, either a cable or antenna connection is required.
Cable Connection IncomingCablefrom
Connect the cable supplied by your local cable company to ANT1
connection on back of television. Select cable mode and ANT1 in SET UP
menu under Prog Chan (Program Channels).
Note: A cable converter box may be required for proper reception.
Check with your local cable company for compatibility
requirements.
Cable Company
2!,
75 OhmVHF/UHF
on back ofTV
Antenna Connections
•ForproperreceptionofVHF/UHF channels,an externalantenna isrequired.For
best receptionan outdoorantennaisrecommended•
•Connect home antenna to ANT1 connectionon back of Incoming Cable from
television. Select TV mode and ANT1 in the SET UP menu
under Prog Chan.
-- -- Cable Preset
f •
Cable Mode is preset at the factory. Antennai
users must change to TV mode and select
ANT1 inthe Set Up MenuunderProgChan.
Home Antenna
E1

INSTALLA TION
Optional Equipment Connections
VCR Connection
Followthis diagram when connectingyour televisionto a VCR only.
L
@
CABLES NOT SUPPLIED TERMINALS ON BACK OF "IV
"1
IncomingCabte
@@@
0@
RI.
the
Note: The remote control must be programmed with supplied codes to operate the VCR. See
Programming the Remote Controlin theRemote Control Quick Reference Guide.
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu under ProgChan (Program Channels).
2. Tune the televisionto the television programyou want toview.
Viewing a video
Procedure
OOption A
1. Select ANTi in the SET UP menu under Prog Chan (Program Channels).
2. Press the W/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to yourVCR.
3. Begin the video.
[] Option B
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the televisionto Channel 3 or 4, depending onyour VCR,
3. Begin the video.
Recording a television program
Procedure
£3 Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chart(Program Channels).
2. Tune the televisionto Channel 3 or 4, dependingon your VCR.
3. Using the VCR, tune to the television programyou want to record.
4. Begin recording.
[] Option B (Recording one programwhile viewing another program)
1. Select ANT1 in the SET UP menu under ProgChan (Program Channels).
2. Press the W/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the televisionprogramyou want to record.
4. Begin recording.
5. Press the W/VIDEO button on the remote controlto switchback to TV mode.
6. Tune the televisionto the televisionprogramyou want to view.
El

INSTALLA TION
Optional Equipment Connections (Cont.)
Open the door on the TV front panel to use the connections for your optional equipment
(Palmcorder, VCR, or other video components). Select input 3 mode by pressing W/VIDEO
button.
CONNECTIONS ON FRONT OF "IV
VIDEO AUDIO
Cable Box Connection
Followthisdiagramwhenconnectingyourtelevisiontoa cable boxonly.
CABLE BOX
INPUT OUTPUT
@
TERMINALS ON BACK OF TV
IncomingCable from
Cable Company I
Note: The remote control must be programmed with supplied codes to operate the cable
box. See Programming the Remote Control in the Remote Control Quick Reference
Guide.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view.
Note: To use special features such as Favorite Channels and Channel Captions (see Special
Features section for more information), ANT1 must be selected in the SET UP menu
under Preg Chan.
IB

INSTALLATION
Optional Equipment Connections (Cont.)
VCR and Cable Box Connection
Follow this diagram when connecting your television to both a VCR and a cable box.
VCR
I_ T O ;w_-
J
CABLE BOX ="
Li i
IncomingCable _€_ "1
CABLESNOT SUPPLIED
00
TERMINALS ON BACK OF "rv
Note: The remotecontrol mustbe programmed withsuppfiedcodes tooperate the VCRand
cable box. See Programmingthe Remote Controlin the Remote Control Quick
Reference Guide.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 inthe SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium cable channel you want to view.
Note: To use special features such as Favorite Channels and Channel Captions (see Special
Features section for more information), ANT1 must be selected in the SET UP menu
under Prog Chart.
Recording a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Press the TVNIDEO button on the remote control to select the video input ( VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on your VCR.
5. Using your cable box, tune to the premium cable channel you want to record.
6. Begin recording.
Note: Toviewa differentchannelwhilerecording:
•Select ANT1 intheSET UP menuunderProgChan.
•PresstheW/VIDEO buttononthe remotecontrolto selectTV mode.
•Tunethetelevisiontoatelevisionprogram(exceptanotherpremiumcablechannel). ii

INSTALLATION
Optional Equipment Connections (Cont.)
Amplifier Connection (TO AUDIO AMP)
To listen through aseparate stereo system, connect an external audio amplifier TO AUDIO AMP
inputs on back of television.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
TERMINALS ON BACK OF "IV
AMPURER
CABLESNOT SUPPLIED
Audio Adjustments Procedure
1. Select SPEAKERS ON located in the on screen AUDIO menu.
2. Set amplifiervolumeto minimum.
3. AdjustTV volumeto desiredlevel.
4. Adjustamplifiervolumeto matchtheTV.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu to
control speakers from the TV or select FIXED AUDIO OUT to control
speakersfrom the extemal amplifier.
6. Volume, mute,bass, trebleand balanceare nowcontrolledfrom theTV, ifyou
selectVARIABLEAUDIO OUT mode.
lal

PICTURE IN PICTURE (PIP)OPERA TION
Picture In Picture (PIP) Operation
This television includes a two tuner Picture In Picture (PIP) feature. This allows
watching two (2) live broadcasts at the same time without or with an external video
source (VCR).
Basic PIP Operation
Procedure
Press the PiP button on the remote control to display the PIP frame onscreen.
Note: The audio is for the Main Picture only.
1, Choose channels for the PiP frame by pressing the remote control PIP CHANNEL
up/down buttons,
2, Choose channels for the Main Picture by pressing the remote control CH up/down
buttons or by using the numeric keypad.
SWAP Button
The SWAP button switchesthe PIP and Main
Picture source. Press the RECALL button for
onscreenPIP and MainPicturesourcestatus,
PIP Operation with a Cable Box
Procedure
OTo view premium (scrambled) cable channels through your cable box in the Main Picture'.
Note: Use this procedure if you want to watch premium cable channels in the Main
Picture while viewing a television program or video in the PIP frame.
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune television to Channel 3,
3. Press the PIP button on the remote control to display the PIP frame onscreen,
Note: The audio is for the Main Picture only.
4. Verify the cable box is ON.
5. Choose channels for the Main Picture by tuning the cable box.
6. Choose channels for the PiP frame by pressing the TV button on the remote control
and using the PIP CHANNEL up/down buttons.
Note: Swap is not available when using the cable box to tune channels. If your cable box has
a video output, it can be connected to the television to allow you to use all PIP
functions. See the equipment manual for more information. (Tune the PIP to the video
input connected to the cable box).
im

ROLLER GUIDE MENU NA VIGATION
Roller Guide Menu Navigation
LOCK
\
ROLLER GUIDE MENU SELECTIONS
Procedure
1. Press the ACTION button on the Remote Control to display the Roller Guide Menu.
2. Press the CH up/down to rotate the Roller Guide to the desired feature.
3, Press the ACTION button to display main menus and submenus.
4. Press the CH up/down buttons to highlight desired main menu feature.
5. Press the VOL right button to enter submenus.
6. Press the CH up/down buttons to highlight desired submenu feature.
7. Press the VOL right/left button to select or adjust feature.
8. Press the ACTION button twice to return to the Roller Guide Menu.
9. To exit the Roller Guide Menu, press the VOL left button.
Remote ACTION /Navigation Buttons
CH
VOL O VOL
CH
Remote Control Guide
The Remote Control Quick Reference Guide is located within the package provided
with this"IV.
El

ROLLER GUIDE FEATURE CHART
Roller Guide Feature Chart
@ETUP
LANGUAGES
PROG. CHAN
(ProgramChannels)
[]
CC
(ClosedCaptio,_ng)
OTHER ADJ,
II
II
AUDIO ADJ,
(Adjustments)
OTHERADJ.
(Adiustments)
SET UP
[] Select English, Spanish, or French menu.
[] MODE -Select Cable or "IV. See
Installation section in manual.
[] ANTENNA -Select ANT 1 or ANT 2.
[] AUTO PROGRAM -Automatically program
channels having a signal into memory.
[] MANUAL PROGRAM -Manually add or
delete channels from memory.
[] CC ON MUTE -Activate C1-C4 for Closed
Captioning display when the remote MUTE
button is pressed.
[] CC MODE - Select T1-T4 or C1-C4 for
Closed Captioning, program guides and
other information.
[] AUTO POWER ON - SelectSET to power
upthe PTV at the sametime as the Cabl(
Box or othercomponentsor selectOFF.
[] CONVERGENCE - Adjustment may be
requiredwhen the P'rv is movedbecause
of the effectsof the Earth'smagneticfield
on the projectiontubes.
AUDIO
I
[] MODE - Select STEREO, SAP (Second
Audio Program) or MONO. (Use MONOI
whenstereosignalisweak.)
[] BASS - Increase or decrease the bass
response.
[] TREBLE -Increaseor decrease the treble
response.
[] BALANCE Emphasize the left/right
speakervolume.
[] NORMAL - Reset BASS, TREBLE and
BALANCEto factory default.
AI SOUND - Automaticallyadjustvolume
to maintain a comfortablelistening level.
(AI soundisnotavailableinVIDEO mode).
la

ROLLER GUIDE FEATUR E CHART Roller Guide Feature Chart (Cont.)
W
0
Io
SURROUND
SPEAKERS
SPATIALIZER ® Three dimensional
surround sound with two speakers.
ON -TV speakers operate normally.
OFF & VAO (Variable Audio Output) -
TV speakers off - audio adjustable by TV.
OFF & FAO (Fixed Audio Output)-
TV speakers off -- audio adjustable only
by the external amplifier.
TIMER
£3 Set the time and the day of the week.
('13mewill display onscreen after turning on
CLOCK SET the television, pressing the RECALL button
or changing channels).
£3 Set timer to turn off "IV in 30, 60 or
SLEEP 90 minutes. Select NO to turn timer off.
i H , £3
TIMER 1
TIMER 2
VIDEO ADJ.
(Adjustments)
OTHER ADJ.
(Adjustments)
I I II
£3
£3
£3
£3
D
£3
£3
Set one or both timers to automatically turn
television on and oft at selected times, on
selected channels, and on selected days.
(Clock must be set to use Timer features).
_RE
COLOR - Adjust desired color intensity.
TINT - Adjust natural flesh tones.
BRIGHTNESS -Adjust dark areas for crisp
detail.
PICTURE - Adjust white areas of picture.
SHARPNESS -Adjust clarity of outline
detail.
NORMAL- Reset all picture adjustments to
factory default settings.
AUTO COLOR Equalize color tc
compensate for signal variations.
CHANNELS
CI,IANNI!I,_
"£3 CHANNEL SCAN Select FAV (1.=
FAVORITES favorites) or ALL channels to scar
channels using the up/down CH buttons.

ROLLER GUIDE FEATURE CHART
Roller Guide Feature Chart (Cont.)
CAPTION
LOCK
MODE
HOW LONG?
PRESET CAPTION Enter channel
numbers for preset captions.
MANUAL CAPTION Enter channel
numbers and captions manually.
INPUT LABEL - Label video connections
for onscreen display of optional equipment.
LOCK
C3 Lock All, Channels or Game with a secret
code.
C3 Select the period of time (12, 24, 48 hours
or ALWAYS) for your option to be locked.
,i
El

SPECIAL FEATURES
Special Features
SET UP
Menu Languages
In SET UP Menu, select IDIOMA /LANGUE to change menu language to ENGLISH, ESPANOL
(Spanish), or FRANQAIS (French).
MODE ENGLISH
_;T+I¢][o,),_ri_
[o)#'d:l_F_Q
Prog Chan (Program Channels)
In SET UP menu under PROG CHAN select:
O MODE to selectTV (antenna) or CABLE mode depending on the signal source.
[] ANTENNA toselect either ANT1 or ANT2.
[] AUTO PROGRAM toautomatically program all channels with a signal.
C3 MANUAL PROGRAM to manually add or delete channels.
In
CABLE
ANTENNA ANT1
AUTO PROGRAM •
MANUALPROGRAM
(Closed Captioning)
This television contains a built-in decoder that displays _ (Closed Captioned) text across the
screen (white or colored letters on black background). It allows the viewer to read the dialogue of a
television program or other information. The program viewed must include Close Captioning for the
feature to work.
[_ Mode
Procedure
[] In SET UP Menu, select _ (Closed Caption).
£] Select _ MODE.
Select OFF, C1, C2, Tf, T2, C3, C4, T3 or T4:
•OFF -When Closed Caption is not desired.
• C1 - For video related information to be displayed, up to 4 lines onscreen at a time. (It
does not block relevant parts of the picture). Text may be in any language.
• C2 to C4 -For other modes of video related information.
• T1 - For program guide and other information to be displayed, when available.
(Blocks a large portion of the picture on the television screen).
T2 to T4 - For other modes of information (Blocks a large portion of the picture on the
television screen).

SPECIAL FEATURES
Press ACTION to return to submenu options, and exit menus
On Mute
Activates the onscreen Closed Caption feature when the MUTE button on the remote control is
pressed.
Note: This feature only functions when the Closed Caption Mode is OFF. The program being
viewed must be broadcast with Closed Captioning. (Refer to your local TV guide).
Procedure
[] In SET UP Menu, select [_ (Closed Caption).
CI Select I-C-C] On Mute
0 Select NO, C1, C2, C3, or C4.
[] Recommended set up for Closed Caption when using the MUTE button:
• [_ ON MUTE: C1
• _ MODE: OFF
[3 Press ACTION to return to submenu options, and exit menus.
[3 Press the MUTE button to activate the Closed Caption feature.
[3 Press the MUTE button again to deactivate the feature.
_"C_ONMUTE NO
OFF
O_MODE
Convergence
In SET UP menu select CONVERGENCE under OTHER ADJ. only after moving the PTV to
adjust for the effects of the earth's magnetic field on the projection tubes.
_ Xolel_B,1Biq AUTO POWER ON OFF
_;- CONVERGENCE •
Note: Convergence seldom needs adjusting except after moving the PTK

SPECIAL FEATURES
Convergence (cont.)
Use the navigation buttons to align the horizontal and vertical green lines on screen with the
outside reference marks, as shown below. Press the ACTION button to move the RED
CONVERGENCE screen.
ReferenceMarks A
Use the navigation buttons to align the red cross with the white cross pattern at the center of the
screen. Press the ACTION button to continue to the blue convergence adjustment screen and
repeat,
Note: TO PREVENT PICTURE TUBE DAMAGE DO NOT LEAVE TEST PATTERN
ON FOR AN EXTENDED PERIOD OF TIME.
\ t.,.. Convergence Adjustment
An adjusted cross pattern appears white with a
minimumofcolorfringing.
la

TIMER SPECIAL FEATURES
Sleep
In TIMER menu, select SLEEP to turn TV off in 30, 60 or 90 minutes Select NO to turn off
timer.
[*_[,I*_:ll.'i=iI1
_,_,_._ HOW LONG? 30
Ii _lla..!_
Timer I and Timer 2
In TIMER menu, select one or both timers to turn the television on and off at selected times, on
selected channels, and on selected days.
Note: TIME must be entered in CLOCK SET to operate TIMER features.
E*]I[,I*_[-"T=I_--
I[.,.']_-=]-d_
DAY SAT
ON TIME
OFF TIME _:
ENTER CHANNEL ___
\1/ Turn Off After 90 Minutes
The TV automatically turnsOFF after 90 minutes
whenturnedon by the TIMER. If the OFF time is
selected or if a key is pressed,the automatic OFF
after 90 minutes will be cancelled.
\t., TIMER Activation
The TIMER is active when the TV is OFF or ON,
The TV will switch to the selected channel at the
selected time set in the TIMER.
m

SPECIAL FEA TURES
PICTURE Other Adjustments
In Picture menu under OTHER ADJ. select:
CI COLOR TEMP to increase and decrease WARM (red) and COOL (blue) colors to suit
personal preferences
[3 AUTO COLOR ON to maintain consistent color and tint.
AUTO COLOR ON
CHANNELS Favorites
In CHANNELS menu under FAVORITES select:
[] CHANNEL SCAN FAV to enter up to 15 favorite channels.
[] CHANNEL SCAN ALL to scan all channels when using the CH up/down buttons.
CHANNEL SCAN FAV
ENTER CHANNEL 123
FAVORITECHANNELS
Caption
In CHANNELS menu under CAPTION select:
[3 PRESET CAPTION to enter channel numbers for popular TV stations.
[] MANUAL CAPTION to enter numbers and captions manually.
[3 INPUT LABEL to label video input connections for onscreen display.
[#'_'LI]_tIIF=_t. PRESET CAPTION •
_I_ilON-; "_ _ MANUAL CAPTION •
INPUT LABEL •
Irtrl

LOCK SPECIAL FEATURES
MODE
To use LOCK options:
£3 ENTER CODE FIRST -Use the numeric keypad to enter a four-digit secret code, After
entering your secret code for the first time, the onscreen display will change to CHANGE
CODE.
Note: Use a code that is easy toremember or record it in a safe place.
In MODE submenu select:
OLOCK SET to choose:
•OFF -To turn lock function off.
•ALL -To lock all channels and video inputs.
• CHANNEL - To lock up to four channels of your choice.
•GAME -To lock channels 3, 4 and video inputs.
OBLOCK PROGRAMS _r - To use Block Programs Ratings.
OCHANGE CODE - Use numeric keypad to change your four-digit secret code.
Note: If in CHANGE CODE you enter a different code from the one used previously,
the new code becomes the controlling code.
Press the ACTION button to return to submenu, then select HOW LONG to choose the period
of time you want your option to be locked (12, 24, 48 hours or ALWAYS).
Note: Be cautious when ae/ecting ALWAYS. If ALWAYS is se/ected, and you forget
your secret code, the television must be serviced by a qualified technician in
order toclear the LOCK setup.
Press the ACTION button to return to submenu, and to exit menus.
LOCK SET
_BLOCKPROGRAMS: OFF
U,S. TV PROGRAMS
STATUS OFF
ENTER CODE
FIRST _ - -
Note: If GAME, CHANNEL or ALL is selected, and if a blocked channel or video inputis
selected, the message PG (Parent Guard) displaysin the upper rightcorner of the
televisionscreen
UnlockLOCKSET by reenteringthe same four-digitsecretcodeand selectingOFF.
*For more information about Block Programs, see the V-CHIP Parental Lock
manual provided with the TV package.
El