Panasonic BT-WMA26G User manual

Wall Mount Adaptor (Adjustable angle type)
for use in average room
Wandhalterung (mit einstellbarer Neigung)
zur Verwendung in normalen Räumen
Adaptateur de fixation murale (type à angle réglable)
pour l’utilisation dans une pièce moyenne
Adattatore per montaggio a parete (tipo angolare regolabile)
da utilizzarsi in un locale medio
Adaptador de montaje en la pared (tipo de ángulo ajustable)
para uso en habitaciones medianas
壁掛け金具（角度可変型）
室内専用
Supported model
Unterstütztes Modell
Modèle pris en charge
Modello supportato
Modelo compatibleå
対応機種
BT-LH2600W
For use by installation personnel Installation Instructions
Zur Verwendung durch das Installationspersonal Installationsanweisungen
Pour l’utilisation par le personnel d’installation Guide d’installation
Per il personale addetto al montaggio Istruzioni di montaggio
Destinado al personal de instalación únicamente Instrucciones de instalación
工事業者様用 取り付け工事説明書
VQT1R41
M0308T0 -P
Printed in Japan
BT-WMA26G
Model No.
D

2
■To customers
The “Installation Instructions” is intended for use by installation personnel. Be sure
to employ certified personnel to perform the installation.
After the installation and receiving the “Installation Instructions” from the
installation personnel, save it for future use. When moving or removing the LCD
monitor, give this manual to the installation personnel to perform the operation.
■Hinweis für den Kunden
Die „Installationsanweisungen“ sind für den Gebrauch durch das
Installationspersonal vorgesehen. Lassen Sie die Installation von zertifiziertem
Personal ausführen.
Bewahren Sie die „Installationsanweisungen“ nach der Installation zur späteren
Verwendung auf. Wenn der LCD-Monitor entfernt oder an einem anderen Ort
angebracht werden soll, übergeben Sie diese Anleitung dem mit der Installation
betrauten Personal.
■Pour les clients
Le « Guide d’installation » est prévu pour l’utilisation du personnel d’installation.
Veuillez utiliser les services d’un personnel qualifié pour exécuter l’installation.
Après l’installation et la réception du « Guide d’installation » du personnel
d’installation, conservez-le pour toute utilisation ultérieure. Si vous déplacez ou
retirez l’écran LCD, veuillez donner ce manuel au personnel qui va effectuer cette
opération.
■Ai clienti
Le “Istruzioni di montaggio” sono destinate al personale addetto al montaggio. Per
l’esecuzione del montaggio impiegare tecnici specializzati.
Dopo il montaggio e dopo aver ricevuto le “Istruzioni di montaggio” dal personale
addetto al montaggio, conservarle per riferimento futuro. Quando si sposta o si
rimuove lo schermo LCD, fornire il presente manuale al personale addetto al
montaggio incaricato dell’operazione.
■Para los clientes
Las “instrucciones de instalación” están destinadas al personal de instalación.
Asegúrese de que personal certificado lleva a cabo la instalación.
Cuando el personal de instalación finalice la instalación y le entregue las
“instrucciones de instalación”, guárdelas para usos futuros. Cuando mueva o
retire la pantalla LCD, entregue este manual al personal de instalación para que
realice la operación.
■ お客様へ
この「取り付け工事説明書」は、工事業者様用です。取り付け工事は必ず、工事専門業
者にご依頼ください。
また、工事完了後は、この「取り付け工事説明書」を工事業者様よりお受け取りの上、
保存いただきますよう、お願いします。移設、撤去の際には、この「取り付け工事説明
書」を工事業者様にお渡しの上、ご依頼ください。

3
ENGLISHDEUTSCH
ESPAÑOL FRANÇAISITALIANO
日
本
語
■To installation personnel
Read the “Installation Instructions” thoroughly and then perform the operation
correctly and safely.
Also, always read the “Read this first!” on pages 4 and 5 of this manual as they
contain important information.
After the installation, give the “Installation Instructions” to the customer to save for
future use.
■Hinweis für Installationspersonal
Um eine ordnungsgemäße und sichere Installation zu gewährleisten, sind die
„Installationsanweisungen“ genau zu beachten.
Der Abschnitt „Sicherheitsrelevante Hinweise!“ auf den Seiten 10 und 11 dieses
Handbuchs enthält wichtige Informationen und ist unbedingt zu beachten.
Übergeben Sie die „Installationsanweisungen“ nach der Installation dem Kunden
zur späteren Verwendung.
■Pour le personnel d’installation
Veuillez lire attentivement le « Guide d’installation » puis effectuer l’opération
correctement et sans risque.
Veuillez également lire les « Pour votre sécurité! » aux pages 16 et 17 de ce
manuel, car elles contiennent des informations importantes.
Après l’installation, veuillez donner le « Guide d’installation » au client pour son
utilisation future.
■Al personale addetto al montaggio
Leggere accuratamente le “Istruzioni di montaggio” e quindi eseguire le
operazioni correttamente e in sicurezza.
Inoltre, leggere sempre le “Per la sicurezza personale!” alle pagine 22 e 23 di
questo manuale in quanto contengono informazioni importanti.
Dopo il montaggio, consegnare le “Istruzioni di montaggio” al cliente affinché
questi le conservi per riferimento futuro.
■Para el personal de instalación
Lea completamente las “instrucciones de instalación” y, a continuación, lleve a
cabo la operación de forma correcta y segura.
Asimismo, lea siempre el apartado “Para su seguridad!” en las páginas 28 y 29 de
este manual, ya que contienen información importante.
Después de la instalación, entregue las “instrucciones de instalación” al cliente
para que las conserve para usos futuros.
■ 工事業者様へ
この「取り付け工事説明書」をよくお読みの上、正しく安全に工事を行ってください。
また、34〜35ページの、「安全上のご注意」は、重要な内容ですので、必ずお読みく
ださい。
工事完了後は、この「取り付け工事説明書」をお客様にお渡しいただき、保存いただき
ますよう、お願いします。

4
■Installation to be performed by certified personnel only.
■Do not install on wall where tolerance is weak.
(The LCD monitor may fall, damaging the wall and causing injury.)
Make sure the wall can withstand five times the weight of the LCD monitor together with the
wall mount adaptor.
■Install only on vertical wall.
(The LCD monitor may fall, damaging the wall and causing injury.)
• Firmly install to the wall, making sure the weight of the LCD monitor together with the wall
mount adaptor can be withstood, and there is no slackness resulting from vibration, etc.
(For details on the weight of the LCD monitor, refer to the operating instructions of the LCD
monitor.)
■Do not disassemble or modify the wall mount adaptor.
(The LCD monitor may be damaged or fall, causing injury.)
■If the area for installation is not strong enough, be sure to reinforce the area.
(If the installation area is not strong enough, and the screws become loose, the LCD monitor
may fall, causing injury.)
■Install only the designated LCD monitors.
■Install only using the designated method.
■Do not install the wall mount adaptor horizontally, at an angle, or upside down.
(Otherwise, the LCD monitor may fall and become damaged, and cause injury.)
■Do not install in the following locations.
•Outdoors or in an environment like being outdoors
•Location subject to humidity, lots of dust, oil and smoke, steam, or heat
•Location with risk of vibration or shock
•Where hot air is coming out from heating equipment
•Beneath air conditioner where there is a risk of water drop
(Otherwise, this may cause fire, electric shock, or drop.)
■Do not use staple to secure the cable.
(Otherwise, this may cause fire.)
■When installing, use a method that is appropriate for the structure and material of the
installation location.
■When installing, always use the supplied components.
(Otherwise, this may cause damaged LCD monitor to fall and cause injury.)
■Make sure installed screws do not touch any wiring inside the wall.
(Otherwise, this may cause electric shock.)
Always follow these precautions
Read this first!

5
ENGLISH
■Make sure the LCD monitor is installed in a way that does not block heat emission.
(If heat emission is blocked, this may cause fire.)
• For installation of the LCD monitor, be sure to leave enough space as indicated below.
Upper part: 10 cm (4 inches) or more. Side: 30 cm (11 13/16 inches) or more. Lower part: 10
cm (4 inches) or more
■When removing the LCD monitor, also remove the wall mount adaptor.
(Being caught by the wall mount adaptor may cause injury.)
■Make sure the electrical outlet is located so that the LCD monitor power plug is easily
assessable.
(When there is a malfunction, if the power plug of the LCD monitor is not disconnected, this
may cause fire or injury.)
■Make sure two or more persons are used when installing or removing the LCD monitor.
(If the LCD monitor falls, this may cause injury.)
■Before installation, always disconnect the power plug of the LCD monitor.

6
BT-WMA26G Wall Mount Adaptor (Adjustable angle type)
Wall mount adapter for LCD
monitor . . . . . . . . . . . . . . . . ×1
Tool for the installation: Use a torque driver or torque wrench with torque of 3 N·m or more.
Unit fixing screws . . . . . . ×2
( + M5-35)
Allen head countersunk
screws . . . . . . . . . . . . . . . ×4
(M4-18)
Dished toothed washers. . . ×4
Insulation spacers. . . . . . . . ×4
Precautions for wall mount adaptor installation
■There are lock mechanisms on either side of the unit, so secure space between the LCD
monitor and any wall surfaces to the left or right of at least 30 cm (11 13/16 inches).
■To ensure correct LCD monitor performance and prevent trouble, do not install at any of the
following locations.
• Near sprinklers or fire/smoke detectors
• Near high-voltage wires or dynamic power supplies
■ Ensure good air flow so that the equipment ambient temperature does not exceed 35 °C (95 °F).
Failure to do this may cause heat to build up inside the LCD monitor, resulting in
malfunction.
Panasonic does not accept any responsibility for accident or damage during
installation if procedure in this manual is not followed.
1) Exercise care when selecting the location for the monitor because it may discolor or deform due to light or
heat if it is placed where it is exposed to direct sunlight, or near a heater.
2) Upkeep
Wipe with a dry cloth. If the unit is extremely soiled, first wipe off soiling with a neutral detergent diluted in
water, and then wipe with a dry cloth. Do not use cleaners such as benzene, thinner or furniture wax because
they may cause paint peeling. (If using a chemical wiping cloth, follow any precautions included.)
3) Do not affix adhesive tape or stickers. Doing so may dirty the surface of the wall mount adaptor.
Requests regarding handling
Components
• The illustrations are image illustrations and they may be different from the actual product and
shape.

7
ENGLISH
Installation procedure
Note
1Confirm the strength of the proposed installation location
The weight of the wall mount adaptor is approximately
3.5 kg, but the weight of the LCD monitor for attaching to
the wall mount adaptor is approximately 15 kg. Make sure
the wall can withstand five times the weight of the LCD
monitor together with the wall mount adaptor.
Check the wall strength at the six attachment points by
referring to the following dimensions diagram of the wall
mount adaptor, and provide adequate reinforcement if the
strength is not sufficient.
* Be sure to use screws to secure them.
480 (19)
440 (17 3/8)
163 (6 1/2)
216 (8 5/8)
176 (7)
325 (12 7/8)
280 (11 1/8)
23
(15/16)
118
(4 3/4)
90
(3 5/8)
• There are 12 installation holes in the wall
mount adaptor.
If the wall material is wood, and adequate
strength cannot be ensured when installing
at the 6 points indicated on the right, use
also the spare holes.
However, exercise care because some wall
materials may crack if screws are located
too close together.
* For details on the dimensions for
installing the LCD monitor, refer to the
“External dimensions”.
Note • Use commercially available M6 screws suited to the wall surface
material for installing the adaptor to the wall.
Unit: mm (inch)
2. Install the wall mount adaptor to the wall
• Install making sure the arrows indicated on the wall mount adaptor are facing up.
• If the wall consists of a material such as concrete and bolts or nuts must be
embedded beforehand, determine the hole positions by aligning using the actual
wall mount adaptor, or calculate the hole positions based on the dimensions
diagram, and then embed the M6 bolt or nut. When embedding bolts, locate so that
the bolts protrude from the wall by 10 to 15 mm (7/16 to 5/8inches).
First, fasten the screw at the top center hole .
Using a level, correct any adaptor inclination, and then fasten screws at the
remaining 5 locations.
２
1
A
3. Adjust the angle of the wall mount adaptor
The angle of the wall mount
adaptor can be adjusted from
“no incline” to “20° incline” in
5 settings at intervals of 5°.
To change the angle, loosen
the angle fixing screw
and vertical fixation screw
of the angle base, and
move to the desired angle.
After positioning, securely
tighten (2.7 – 3.3 N·m) the
angle fixing screw . If “no
incline” is set, also firmly
tighten (2.7 – 3.3 N·m) the
vertical fixation screw .
3
2
3
2
Angle adjustment
hole positions
“No incline” At “5° incline” At “15° incline”
Wall attachment holes
(at 6 points)
Wall mount adaptor
“No incline”
“5° incline”
“10° incline”
“15° incline”
“20 incline”
Angle fixing
screw
2
Angle base Vertical
fixation screw
3
Strap
Wall surface
Wall surface Wall surface

8
5. Attach the LCD monitor to the wall mount adaptor and connect wiring
Loosen the left and right red screws for open/close
fastening (one each on the left and right sides).
Hook the insulation spacer on the top of the LCD
monitor over the notches on the adaptor, and allow
the LCD monitor to hang from the adaptor.
Pull the LCD monitor forward, as shown in the right
diagram, and then connect the wiring.
After wiring is finished, slightly raise the LCD monitor
and insert the lower insulation spacers into the lower
part of the wall mount adaptor.
Lower the LCD monitor into place.
５
４
３
２
1
1
③
②
○
４
○
５
6. Secure the LCD monitor
Insert the supplied unit fixing screws into the indicated holes at the left and right sides of the wall mount adaptor.
Firmly fasten the red screws for open/close fastening (one each for the left and right, 2.7 – 3.3 N·m) in the indicated
holes on the sides of the wall mount adaptor.
After the installation, check again to make sure the necessary parts are firmly attached.
３
1
２
1
4. Prepare the LCD monitor
Attach the insulation spacers to the LCD monitor.
Place the LCD monitor face down on a
blanket or other soft cloth that is clean
and free of debris, and follow the
procedure below.
Use the included hexagon wrench to
attach the allen head countersunk screw,
dished toothed washer, and insulation
spacer (four each) to the tapped holes for
fixing insulation spacers, as shown in the
right diagram. Allen head countersunk screw
Dished toothed washer
Insulation spacer
Red screws
for open/close
fastening
1
Lower insulation
spacer
Lower hole
Top insulation
spacer
Top notch
Red screws for
open/close fastening
1
Wall mount adaptor
Position for inserting
unit fixing screw
Unit fixing screw
Tapped holes for
insulation spacers
Note
• If the LCD monitor is raised too mush, there is a risk that
it may become unhooked from the top of the adaptor.
Note
• Be sure to firmly tighten (0.9 – 1.1 N·m) the unit fixing
screws on the left and right sides to keep the LCD
monitor from falling off the wall mount adaptor.
• To readjust the angle, remove the unit fixing screws,
adjust the angle, and then fasten the unit fixing
screws again.
Wall surface Wall surface
Wall surface

9
ENGLISH
日
本
語
①
③
②
LCD monitor
unit fixing screw
Lower insulation spacer
■External dimensions table Unit: mm (inch)
0°5°10°15°20°
A173 (6 7/8)208(8 1/4)241 (9 1/2)273 (10 3/4)303 (12)
B161 (6 3/8)157(6 1/4)153 (6 1/8)148 (5 7/8)142 (5 5/8)
C0(0) 12 (1/2)24 (1) 35 (1 7/16)46 (1 13/16)
D442 (17 1/2)
E663 (26 1/8)
F113 (4 1/2)
G114 (4 1/2)
H59 (2 3/8)58 (2 3/8)57 (2 1/4)56 (2 1/4)55 (2 1/4)
Wall Mount Adaptor (Adjustable angle type) External dimensions
D
E
118
(4 3/4)
73
(2 7/8)
120
(4 3/4)
325
(12 7/8)
280
(11 1/8)
163
(6 1/2)
176
(7)
23
(15/16)
216 (8 5/8)
440 (17 3/8)
480 (19)
90
(3 5/8)
F
F
A
G
D
C
B
H
63.2 (2 1/2)
Target model
BT-LH2600W
Dimensions
Installation angle
Tilt adjustable range/external dimensions
Removal of the LCD monitor
Remove the unit fixing screws (one each for the left and right) that are fastened to the sides of the wall mount adaptor.
While lifting the bottom of the LCD monitor, pull it towards yourself.
When the lower insulation spacers are removed, keep lifting the LCD monitor upward.
３
２
1
External view of LCD Monitor
Wall surface Wall surface

10
■Die Installation darf nur durch zertifiziertes Personal ausgeführt werden.
■Bringen Sie das Gerät nicht an Wänden an, die nicht über die erforderliche Festigkeit
verfügen.
(Der LCD-Monitor kann herunterfallen, was zu Beschädigungen der Wand und zu
Verletzungen führen kann.)
Stellen Sie sicher, dass die Wand in der Lage ist, das fünffache Gewicht des LCD-Monitors
und der Wandhalterung zu tragen.
■Bringen Sie die Wandhalterung nur an vertikalen Wänden an.
(Der LCD-Monitor kann herunterfallen, was zu Beschädigungen der Wand und zu
Verletzungen führen kann.)
• Bringen Sie die Wandhalterung fest an der Wand an. Stellen Sie sicher, dass die Wand das
Gewicht des LCD-Monitors und der Wandhalterung tragen kann, und dass die
Wandhalterung nicht durch Erschütterungen usw. gelockert werden kann.
(Informationen zum Gewicht des LCD-Monitors finden Sie in der Betriebsanleitung des LCD-
Monitors.)
■Die Wandhalterung darf nicht zerlegt oder geändert werden.
(Der LCD-Monitor kann beschädigt werden oder herunterfallen, was zu Verletzungen führen
kann.)
■Wenn der Wandbereich nicht stark genug für die Installation ist, muss er verstärkt
werden.
(Wenn der Installationsbereich nicht stark genug ist und sich die Schrauben lösen, kann der
LCD-Monitor herunterfallen und Verletzungen verursachen.)
■Installieren Sie nur vorgesehene LCD-Monitore.
■Gehen Sie nur nach der vorgesehenen Installationsmethode vor.
■Installieren Sie die Wandhalterung nicht horizontal, schief, oder mit der Oberseite nach
unten.
(Andernfalls kann der LCD-Monitor herunterfallen, was zu Beschädigungen und Verletzungen
führen kann.)
■Die folgenden Standorte sind nicht zur Installation der Wandhalterung geeignet:
•Im Freien bzw. in Umgebungen, in denen Umgebungsbedingungen wie im Freien herrschen.
•Standorte mit hoher Luftfeuchtigkeit oder Belastung durch Staub, Öl und Rauch, Dampf,
oder Hitze
•Standorte, an denen das Risiko von Erschütterungen oder Stößen besteht
•In der Nähe der Heißluft-Austrittsstellen von Heizungsanlagen
•Unterhalb von Klimageräten, aus denen Wassertropfen austreten können
(Dieses kann zu Bränden, elektrischem Schlag oder Herunterfallen des Gerätes führen.)
■Verwenden Sie zur Befestigung des Kabels keine Klammern.
(Andernfalls besteht Brandgefahr.)
Beachten Sie stets die
folgenden Sicherheitsmaßnahmen
Sicherheitsrelevante Hinweise!