Panasonic WV-Q204/1S User manual

Before attempting to mount this product,
please read these instructions carefully and save this manual for future use.
Rack Mount Bracket
These Rack Mounting Brackets are used for mounting such as the WJ-NT304, etc.
Model Nos. WV-Q204/1S
WV-Q204/2S
INSTALLATIONS
The installation described below should be made by qualified service personnel or system installers.
Important: Recommended tightening torque is M3: 0.78 N·m (8 kgf·cm).
■Mounting in a Rack
WV-Q204/1S can mount the WJ-NT304 on the rack.
WV-Q204/2S can mount side by side up to two WJ-NT304S on the rack.
Illustrations as shown below are examples to install WJ-NT304 and WJ-NT304S.
Rubber feet
Rack mounting
bracket (small)
Rack mounting
bracket (large)

1. Remove the four rubber feet from the bottom of the WJ-NT304.
●Mounting one WJ-NT304 with the WV-Q204/1S
2. Fix the mounting brackets (large and small) on both sides of the WJ-NT304 with the eight supplied screws (M3x8) as
shown below.

Joint metal Remove 2 screws from
the rear beforehand.
Rack mounting
bracket (small)
Rack mounting
bracket (small)
●Mounting two WJ-NT304 with the WV-Q204/2S
2. Place the joint metals on the WJ-NT304S as shown below and fix them with the supplied screws (M3x6)
Note: Remove two screws from the rear of the WJ-NT304 beforehand.
3. Install the WJ-NT304S with the rack mounting brackets in the
rack by using four screws (not included).
Cautions:
• Do not block the ventilation opening or slots in the cover
to prevent the appliance from overheating.
Always keep the temperature in the rack within +45°C
(113°F).
• Secure the rear of the appliance to the rack by using addi-
tional mounting brackets (procured locally) if the rack is
subject to vibration.
Rack mounting screws
Mounting two WJ-NT304S
STANDARD ACCESSORIES
WV-Q204/1S: Mount Screw
Binding head (M3 x 8) .................. 8 pcs.
Specifications are subject to change without notice.
WV-Q204/2S: Mount Screw
Binding head (M3 x 8) ................. 8 pcs.
Flat head (M3 x 6) ...................... 12 pcs.
For further informations, refer to Operating Instructions of
System Unit.
When install the unit except CCTV system unit, use supplied
tapping screws.
Fix the mounting brackets (small) on both sides of the
WJ-NT304S with the eight supplied screws (M3x8) as shown
below.
For U.S., Canadian and Puerto Rican fields:
Panasonic System Solutions Company,
Unit Company of Panasonic Corporation of North America
Security Systems
www.panasonic.com/security
For customer support, call 1.877.733.3689
Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094
Zone Office
Eastern: Three Panasonic Way, Secaucus, New Jersey 07094
Central: 1707 N. Randal Road, Elgin, IL 60123
Southern: 1225 Northbrook Parkway, Suwanee, GA 30024
Western: 6550 Katella Ave., Cypress, CA 90630
Panasonic Canada Inc.
5770 Ambler Drive,Mississauga,
Ontario, L4W 2T3 Canada [phone]
http://www.panasonic.ca
Panasonic Sales Company
Division of Panasonic Puerto Rico Inc.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina
P.R. 00985(809)750-4300
© 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. N0407-0 3TU001717AAA Printed in Japan
For European and other fields:
Matsushita Electric Industrial Co., Ltd.
Osaka, Japan
http://panasonic.net