Panasonic KX-HCM10 User manual

Operating Instructions
Please read this manual before using and save this manual for future reference.
Network Camera
In this manual, the suffix of each model number is omitted.
Model No. KX-HCM10

Operating Instructions
2
Introduction
Thank you for purchasing the Panasonic Network Camera.
Please check the following items when unpacking.
Setup CD-ROM
Operating Instructions
Getting Started
Camera Stand
AC adaptor
AC cord
Screws
Washers
— 1 pc.
— 1 pc.
— 1 pc.
— 1 pc.
— 1 pc.
— 1 pc.
— 2 pcs.
— 2 pcs.

Operating Instructions
3
Trademarks
• Netscape and Netscape Navigator are either registered trademarks or
trademarks of Netscape Communications Corporation in the U.S. and other
countries.
• Adobe and Acrobat are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
• Ethernet is either a registered trademarkor a trademark of Xerox Corporation
in the United States and/or other countries.
• Microsoft, Windows, WindowsNT, MS-DOS and ActiveX are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/
or other countries.
• Pentium is a trademark or a registered trademark of Intel Corporation or its
subsidiaries in the United States and other countries.
• Screen shots reprinted with permission from Microsoft Corporation.
All other trademarks identified herein are the property of their respective owners.
Network Camera Memo
Serial No.
(found on the rear side of the unit) MAC address
Name and address of dealer
Date of purchase
For your future reference
Attach your purchase receipt here.

Operating Instructions
4
IMPORTANT SAFETY INSTRUCTION
When using this unit, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, or personal injury.
1. Read and understand all instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. After taking away the dust on the Fixed Focus Lens, please wipe the Fixed
Focus Lens with a lens cleaning paper.
6. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
7. Protect the AC adaptor cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
8. Only use attachments/accessories such as stand, tripod, and bracket
specified by the manufacturer.
9. Do not touch the unit or the AC adaptor during lightning storms.
10.Unplug this apparatus when unused for long periods of time.
11.Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damagedinany way, such asACadaptorcord orplug
is damaged, the apparatus does not operate normally, or has been dropped.
SAVE THESE INSTRUCTIONS

Operating Instructions
5
Table of Contents
1 Product Introduction..................................................... 7
1.1 Getting to know the Network Camera............................................... 8
1.1.1 Main features...............................................................................................8
1.1.2 System Requirements...............................................................................10
1.1.3 Authentication—System Security feature..................................................11
1.2 Included Accessories......................................................................12
1.3 Camera Feature Locations.............................................................14
1.3.1 Front View.................................................................................................14
1.3.2 Rear View..................................................................................................15
1.3.3 Bottom View..............................................................................................15
2 Network Camera Setup ............................................... 16
2.1 Installation Procedure.....................................................................17
2.2 Network Camera Configuration Type............................................. 18
2.3 How to turn on Network Camera for Installation.............................20
2.4 Network Parameters....................................................................... 21
2.4.1 Preparing the Network Parameters for the Network Camera....................21
2.4.2 Setting IP address of the PC in [Type 4] Configuration Type....................24
2.5 Proxy Server Setting.......................................................................26
2.6 Simple Installation using the Setup CD-ROM.................................28
2.7 Network Camera Access from the Internet.....................................32
3 Network Camera Screen and Setup window............. 34
3.1 Network Camera flow chart............................................................ 35
3.2 Single Camera/Multi-Camera selection.......................................... 36
3.2.1 Viewing the Top View Image screen.........................................................39
3.3 Setup window—General Overview.................................................47
3.3.1 Setting up the Network Camera................................................................51
4 Technical Guides......................................................... 87
4.1 Mounting.........................................................................................88
4.2 Interfacing to the External I/O.........................................................90
4.3 ASCII and ISO-8859-1 Character Table......................................... 92
4.4 Maintenance...................................................................................94

Operating Instructions
6
5 Specification and Troubleshooting............................ 95
5.1 Network Camera reset procedure—default settings.......................96
5.2 Default settings list .........................................................................97
5.3 Specification.................................................................................102
5.4 Troubleshooting............................................................................104
5.5 Confirmation of Network Camera Operation ................................110
Index................................................................................. 113

Operating Instructions
7
Section 1
Product Introduction

Operating Instructions
8
1.1 Getting to know the Network Camera
1.1.1 Main features
Easy installation
Setup CD-ROM simplifies the installation. Insert the Setup CD-ROM and autorun
should start the application automatically. This programme automaticallyfinds the
Network Camera on the network.
High Speed Motion JPEG
Network Camera has an integrated web server. Motion JPEG displays up to 15
frames per second, if the network provides enough bandwidth. To conserve
bandwidth,JPEG - Regularly Refresh canbeselectedfromtheTopPage.Image
Resolution,ImageQuality,Refreshinginterval,Limit time ofContinuousMotion
JPEG and On the Air time can be controlled on the Top View Image Setting
window.
Remote Pan/Tilt Operation
Pan/Tilt operation can move the lens horizontally 120°and downward 45°. This
movable lens allows you to see the situation widely where the object is. Operation
Bar has Preset Positioning feature to register the eight fixed positions. Clicking
thepresetbuttonmovesthelenstothe presetposition.SingleCamerascreenhas
Click to Centre feature too. The object on Single Camera screen can be centred
by clicking on the screen directly.
Multi-Camera Screen
Using Multi-Camera screen you can simultaneously view up to four Network
Cameras at various location. Clicking on each Camera Name switches to the
Single Camera screen from the Multi-Camera screen.
Multi Client Access
The Network Camera allows up to 10 users to view Motion JPEG image
simultaneously. The users can access the Top View Image screen (Single
Camera/Multi-Camera screen) from their own locations. Please note that as the
number of users simultaneously connected to the Network Camera increases, the
overall motion performance will decrease.

Operating Instructions
9
External I/O (Input/Output)
The external sensors/devices such as a door sensor can connect to External
Sensor Input.Theexternalsensors/devicesarecustomerprovided.Anyrequired
custom interface is the customer's responsibility. The alarm/timer trigger can
activate the Image Transfer feature, which cansend the images via e-mail or FTP
(File Transfer Protocol).
External Device Control Output can send a signal to activate the external
devices such as a light around the Network Camera.
Update Firmware
IfUpdate Firmware isreleased,youcandownloadthelatestprogrammefromthe
NetworkCameraTechnicalSupportSite.Installationiseasyandfast.Pleaserefer
to Page 83 for details.
Authentication
Authentication window requires you to enter the administrator/general user ID
and password. Password security can prevent the unregistered users from
accessing your image from their web browsers. Please refer to Section
1.1.3 Authentication—System Security feature for details.
Multi-Language Display
Top Page, Single Camera screen and Multi-Camera screen can be displayed in
English (US), English (UK), French, German, Italian, Spanish and Japanese. All
the Setup windows are also changed in selecting English (US), English (UK) and
Japanese.

Operating Instructions
10
1.1.2 System Requirements
The PC (Personal Computer) and the network must meet the following technical
specifications for the Network Camera to work properly.
*1The Network Camera image is not displayed correctly on the Netscape®
v6.x. Please use Netscape Navigator v4.7.
Item Description
Operating
System Microsoft®Windows®95, Microsoft Windows 98/SE
Microsoft Windows 2000, Microsoft Windows Me
Microsoft Windows NT®4.0, Microsoft Windows XP
Network
Protocol TCP/IP network protocol installed. (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
•The Network Camera does not support PPPoE (Point-to-
Point Protocol over Ethernet®).
CPU Pentium®II 300 MHz or greater
Interface 10/100 Mbps Ethernet card and category 5 cables for your
network connection
Web browser*1Internet Explorer 5.0 or later/Netscape Navigator®4.7
(It is not included in the Setup CD-ROM).

Operating Instructions
11
1.1.3 Authentication—System Security feature
Authentication window requires you to enter the administrator/general user ID
and password for the security. Password security can prevent the unregistered
users from accessing your image from their web browsers. Authentication
windows are not displayed in the default. Please refer to Page 58 for setting up
the Authentication window, theadministrator ID and the password. Please refer to
Page 60 for setting up the general user ID and the password.
Authentication window

Operating Instructions
12
1.2 Included Accessories
The following items are provided with the Network Camera.
Notes
•If any items are missing, please contact the dealer immediately.
•The order numbers listed above are subject to change without notice.
•Save the original carton and packing materials for future shipping and
transportation of the unit.
AC adaptor —1 pc.
Order No. PSLP1222Y AC cord (Type C-7) —1 pc.
Order No. PSJA1074Z
Camera Stand —1 pc.
Order No. PSKLHCM10M
Setup CD-ROM —1 pc.
Order No.
PSQX2871ZCD
Screws —2 pcs.
Order No. PQHE5004Z
Washers —2 pcs.
Order No. XWG35FY

Operating Instructions
13
Setup CD-ROM
Setup CD-ROM starts Setup programme automatically. The Setup programme
simplifies the Network Camera installation. The main files are located as follows.
Adobe®Acrobat®Reader 4.05 or later enables you to see the Operating
Instructions in the Setup CD-ROM. Adobe Acrobat Reader installer is in the Setup
CD-ROM. Please double-click "ar405eng.exe".
Directory tree in the Setup CD-ROM
•When referring to the file structure, please use Explorer.
Notes
•Do not scratch, smudge, write or label either surfaces of the Setup CD-
ROM. Setup CD-ROM may have a scratch on the surface.
•Do not leave the Setup CD-ROM in direct sunlight, near a heat source
or in a hot automobile. It may transform the surface of the Setup CD-
ROM.
•Do not use chemicals or cleanser to clean the Setup CD-ROM. It may
transform the surface of the Setup CD-ROM.
ReadmeEng.txt
Networkcamera
Acrobat4.0installer Acrobat Reader 4.0 Installer directory
Readme file (Please read first.)
Setup programme
Information file to start Setup.exe
Network Configuration Setup Programme directory
Network Configuration Setup Programme
Acrobat Reader 4.0 Installer
Operating Instructions and Getting Started manuals.
ActiveX®Controls Installer directory
ActiveX Controls Installer
Manual
AutoRun.inf
OprInstr.pdf
ar405eng.exe
Netcam
Config.exe
OCX
ActiveXInst.exe
Setup.exe

Operating Instructions
14
1.3 Camera Feature Locations
1.3.1 Front View
Power Indicator
Power Indicator can be controlled on Indicator Control window on Page 81.
Power Indicator blinks in the following situation.
•During the lens centre positioning after turning on the power.
•During the Update Firmware.
•During initialising after pushing CLEAR SETTING button.
•During getting the IP address from the DHCP server.
•Because of the internal failure of the Network Camera. Please refer to
Section 5.4 Troubleshooting.
Fixed Focus Lens and Pan/Tilt operation
Fixed Focus Lens can move in thePan/Tilt operation. Operation Bar on the Single
Camerascreen canoperate the Pan/Tilt. The Pan/Tiltmovesthe lens horizontally
120°and downward 45°. Please refer to Page 41 for the Operation Bar.
Notes
•Do not force to move the lens part around the Fixed Focus Lens.
Compulsive touching may damage the Pan/Tilt motor.
•Do not touch the Fixed Focus Lens. It may leave a fingerprint and can
cause the image to be out of focus. This can also take away the
protective coating on the Fixed Focus Lens.
Power Indicator
(Refer to Page 81 for the Setup.)
Fixed Focus Lens
1 m—Infinity
Pan: - 60°to + 60°
Tilt: 0°to - 45°
The vision in Pan/Tilt ranges
horizontally about 165°and
vertically about 78°.

Operating Instructions
15
1.3.2 Rear View
Ethernet Indicator
Ethernet Indicator turns on when the network is active. It flickers when the
Network Camera is sending and receiving the data.
1.3.3 Bottom View
External I/O
(Refer to
Page 90.)
Ethernet port
(RJ-45)
(Refer to
Page 20.)
DC IN jack
(Refer to
Page 20.)
Ethernet
Indicator
CLEAR SETTING button
(Refer to Page 96.)
MAC address and Serial
Number are indicated on
the label.
(Refer to Page 29.)
MountingHoleforCamera
Stand Mounting or Wall
Mounting.
(Refer to Page 88.)
Hook for AC adaptor cord
(Refer to Page 20.)
Tripod Mounting
Hole
(Refer to Page 88.)

Operating Instructions
16
Section 2
Network Camera Setup

Operating Instructions
17
2.1 Installation Procedure
Select the Network Camera configuration type. (Page 18—Page 19)
Connect the Network Camera for the installation. (Page 20)
Prepare the network parameters for the Network Camera.
(Page 21—Page 22)
Check the proxy server setting. (Page 26—Page 27)
Set up the Network Camera with the Setup CD-ROM. (Page 28—Page 31)
Confirm the Network Camera Access from the Internet. (Page 32—Page 33)
Mount the Network Camera. (Page 88—Page 89)

Operating Instructions
18
2.2 Network Camera Configuration Type
The Network Camera can be connected over the LAN/Intranet and the Internet.
Please select from the four Network Camera configuration types. Network
parameters differ depending on the Network Camera configuration type.
[Type 1]—LAN/Intranet Connection with an Ethernet
Switching Hub
Network Camera can be installed on the LAN/Intranet.
*1Network traffic can be smooth by using the Ethernet switching hub.
[Type 2]—Internet Connection with a Broadband Router
Network Camera can be accessed fromtheInternet. Thebroadband router needs
Port Forwarding (IP Masquerade) feature on Page 32.
LAN/Intranet Ethernet switching hub*1
Modem Broadband
Router
CATV
xDSL
Optical cable
Internet WAN LAN

Operating Instructions
19
[Type 3]—Internet Direct Connection with a Modem
Network Camera can be installed alone without PC on the network. When you set
up the Network Camera in [Type 3], please connect the Network Camera
temporarily in [Type 1], [Type 2] or [Type 4].
Note
Most of the xDSL services use PPPoE. Network Camera does not support
PPPoE. If the Internet connection requires PPPoE, please connect with the
broadband router supporting PPPoE like [Type 2].
[Type 4]—Direct Connection with a PC
Network Camera can be installed with the PC directly.
Note
Please use Category 5 cross cable when connecting directly with the cable to
the PC.
Modem
Internet
Category 5 cross cable

Operating Instructions
20
2.3 How to turn on Network Camera for
Installation
Connect the DC plug of the AC adaptor to the DC IN jack and Category 5 straight/
cross cable to the Ethernet port. Connect the AC plug of the AC adaptor to the
power outlet to turn on the Network Camera. Pan/Tilt moves to the centre position.
Notes
•AC adaptor is used as the main disconnect device, ensure that the power
outlet is located/installed near the equipment and is easily accessible.
•Use Only with specified Panasonic AC adaptor PSLP1222 (Order No.
PSLP1222Z).
•When you set up the Network Camera in [Type 3], please connect the
Network Camera temporarily in [Type 1], [Type 2] or [Type 4].
•Thread the AC adaptor line through the hook upward if it is convenient.
Thread the AC adaptor
line through the hook
downward.
Connect the category 5
cable to the Ethernet port.
To network
DC plug
Power
Outlet
AC adaptor
AC cord