Panasonic WV-SFN480PJ User manual

Operating Instructions
Network Camera
Model No. WV-SFV481
WV-SFN480
WV-SFN480PJ
WV-SFV481 WV-SFN480
This manual covers the models: WV-SFV481, WV-SFN480 and WV-SFN480PJ.
Before attempting to connect or operate this product, please read these instructions
carefully and save this manual for future use.

Preface
About the user manuals
There are 3 sets of operating instructions as follows.
•Operating Instructions (this document): Explains how to perform the settings and how to operate this
camera.
•Important Information: Provides information about the cautions required for safely using and installing this
camera.
•Installation Guide: Explains how to install and connect devices.
The screens used in these operating instructions show the case of WV-SFV481. Depending on the model
used, the screens shown in the explanations may differ to the actual camera screens.
About notations
The following notations are used when describing the functions limited for specified models.
The functions without the notations are supported by all models.
SFV481
: The functions with this notation are available when using the model WV-SFV481.
SFN480
: The functions with this notation are available when using the model WV-SFN480, WV-SFN480PJ.
Trademarks and registered trademarks
•Microsoft, Windows, Windows Vista, Windows Media, Internet Explorer, and ActiveX are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
•Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
•iPad, iPhone, iPod touch, and QuickTime are trademarks of Apple Inc., registered in the U.S. and other
countries.
•Android is a trademark of Google Inc.
•Firefox is a registered trademark of the Mozilla Foundation.
•SDXC Logo is a trademark of SD-3C, LLC.
•All other trademarks identified herein are the property of their respective owners.
Abbreviations
The following abbreviations are used in these operating instructions.
Microsoft® Windows® 8.1 is described as Windows 8.1.
Microsoft® Windows® 8 is described as Windows 8.
Microsoft® Windows® 7 is described as Windows 7.
Microsoft® Windows Vista® is described as Windows Vista.
Windows® Internet Explorer® 11, Windows® Internet Explorer® 10, Windows® Internet Explorer® 9, Windows®
Internet Explorer® 8 and Windows® Internet Explorer® 7 are described as Internet Explorer.
SDXC/SDHC/SD memory card is described as SD card or SD memory card.
Universal Plug and Play is described as UPnP™.
2 Operating Instructions
Preface

Viewer software
It is necessary to install the viewer software “Network Camera View 4S” (ActiveX®) to display images on a PC.
This software can be installed directly from the camera or by selecting the [Install] button next to [Viewer
Software] on the menu of the CD-ROM provided, and then following the on-screen instructions.
IMPORTANT
•The default setting of “Automatic installation” is “On”. Follow the instructions on page 215 when the
message is displayed on the information bar of the browser.
•When the “Live” page is displayed for the first time, the install wizard of the ActiveX control required to
display images from the camera will be displayed. Follow the instructions of the wizard.
•When the install wizard is displayed again even after completing the installation of the ActiveX, restart
the PC.
•The viewer software used on each PC should be licensed individually. The number of installations of
the viewer software from the camera can be checked on the [Upgrade] tab of the “Maintenance” page
(®page 189). Refer to your dealer for the software licensing.
Operating Instructions 3
Preface

Table of Contents
1 Monitor images on a PC ..........................................................................7
1.1 Monitor images from a single camera .............................................................................7
1.2 About live image types .....................................................................................................9
1.2.1 Type of images that can be displayed according to the image setting .............................9
1.2.2 About image capture mode ............................................................................................10
1.3 Image types .....................................................................................................................11
1.4 About image types and available functions .................................................................15
1.4.1 About available resolutions ............................................................................................16
1.5 About the “Live” page ....................................................................................................19
1.6 Monitor images from multiple cameras ........................................................................25
2 Monitor images on a cellular phone/mobile terminal .........................27
2.1 Monitor images on a cellular phone ..............................................................................27
2.2 Monitor images on a mobile terminal ............................................................................29
3 Record images on the SD memory card manually .............................39
4 Action at an alarm occurrence ..............................................................41
4.1 Alarm type ........................................................................................................................41
4.2 Action at an alarm occurrence .......................................................................................41
5 Transmit images onto an FTP server ...................................................43
5.1 Transmit an alarm image at an alarm occurrence (Alarm image
transmission) ...................................................................................................................43
5.2 Transmit images at a designated interval or period (FTP periodic image
transmission) ...................................................................................................................43
5.3 Save images on the SD memory card when images fail to transmit using the FTP
periodic image transmission function ..........................................................................44
6 Display the log list .................................................................................45
7 Playback of images on the SD memory card ......................................49
7.1 Playback “JPEG(1)”/“JPEG(2)” images saved to the SD memory card ....................49
7.2 Playback “H.264(1)”/“H.264(2)” images saved to the SD memory card ....................52
8 About the network security ...................................................................55
8.1 Equipped security functions ..........................................................................................55
9 Display the setup menu from a PC .......................................................56
9.1 How to display the setup menu .....................................................................................56
9.2 How to operate the setup menu .....................................................................................58
9.3 About the setup menu window ......................................................................................60
10 Configure the basic settings of the camera [Basic] ...........................62
10.1 Configure the basic settings [Basic] .............................................................................62
10.2 Configure the Internet settings [Internet] .....................................................................68
10.3 Configure the settings relating to the SD memory card [SD memory card] ..............70
10.4 Access copy images saved on the SD memory card onto the PC [SD memory card
images] .............................................................................................................................76
10.5 Configure the directory of the PC that images will be downloaded to [Log] ............78
4 Operating Instructions
Table of Contents

11 Configure the settings relating to images and audio [Image/
Audio] ......................................................................................................80
11.1 Configure the settings relating to the image capture mode [JPEG/H.264] ................80
11.2 Configure the settings relating to JPEG images [JPEG/H.264] ..................................81
11.3 Configure the settings relating to H.264 images [JPEG/H.264] ..................................83
11.4 Configure the settings relating to the camera operations [Cam. Function] ..............89
11.5 Configure the settings relating to image adjust, back focus, preset position, privacy
zone and VIQS [Image/Position] ....................................................................................91
11.5.1 Configure the settings relating to image quality (“Image adjust” setup menu) ...............92
11.5.2 Set mask areas ..............................................................................................................97
11.5.3 Configure the preset positions (Preset position setup menu) .......................................100
11.5.4 Configure the preset positions (Initial position setup menu) .........................................102
11.6 Back focus setting (“Back focus” setup menu) .........................................................105
11.7 Configure the settings relating to the privacy zone (“Privacy zone” setup
menu) .............................................................................................................................106
11.8 Configure the VIQS setting ..........................................................................................108
11.9 Configure the VIQS area ...............................................................................................111
11.10 Configure the settings relating to audio [Audio] .......................................................113
12 Configure the multi-screen settings [Multi-screen] ..........................117
13 Configure the alarm settings [Alarm] .................................................119
13.1 Configure the settings relating to the alarm action [Alarm] .....................................119
13.2 Configure the settings relating to the alarm output terminal [Alarm] ......................121
13.3 Change the AUX name [Alarm] ....................................................................................121
13.4 Configure the settings relating to the camera action on alarm occurrence
[Alarm] ............................................................................................................................122
13.4.1 Configure settings relating to alarm E-mail notifications ..............................................123
13.4.2 Configure settings relating to FTP transmissions of alarm images ..............................124
13.4.3 Configure settings relating to recording to an SD memory card when an alarm
occurs ...........................................................................................................................126
13.4.4 Configure settings relating to Panasonic alarm protocol notification when an alarm
occurs ...........................................................................................................................127
13.4.5 Configure settings relating to HTTP alarm notification when an alarm occurs .............128
13.4.6 Configure settings relating to camera actions on alarm action .....................................128
13.5 Configure the VMD settings [VMD area] .....................................................................129
13.5.1 Set the VMD areas [VMD area] ....................................................................................132
13.6 Configuration of the settings relating to alarm notification [Notification] ..............134
13.6.1 Configure the settings relating to Panasonic alarm protocol ........................................135
13.6.2 Configure the settings relating to HTTP alarm notification ...........................................137
14 Configure the settings relating to the authentication [User
mng.] .....................................................................................................139
14.1 Configure the settings relating to the user authentication [User auth.] ..................139
14.2 Configure the settings relating to the host authentication [Host auth.] ..................140
14.3 Configure the settings relating to the priority stream [System] ...............................141
15 Configuring the network settings [Network] .....................................144
15.1 Configure the network settings [Network] ..................................................................144
15.2 Configure advanced network settings [Advanced] ...................................................148
15.2.1 Configure the settings related to sending E-mails ........................................................149
15.2.2 Configure the settings related to FTP transmission .....................................................151
15.2.3 Configure the settings relating to the NTP server ........................................................155
15.2.4 Configure the UPnP settings ........................................................................................157
Operating Instructions 5
Table of Contents

15.2.5 Configure the HTTPS settings ......................................................................................158
15.2.6 Configure the settings relating to DDNS ......................................................................160
15.2.7 Configure the settings relating to SNMP ......................................................................160
15.2.8 Configure the Diffserv settings .....................................................................................161
15.3 How to configure HTTPS settings ...............................................................................162
15.3.1 Generation of the CRT key (SSL encryption key) ........................................................163
15.3.2 Generation of the self-signed certificate (security certificate) .......................................164
15.3.3 Generation of CSR (Certificate Signing Request) ........................................................166
15.3.4 Installation of the server certificate ...............................................................................167
15.3.5 Configuration of the connection protocol ......................................................................168
15.4 Access the camera using the HTTPS protocol ..........................................................169
15.4.1 Install the security certificate ........................................................................................169
15.5 How to configure the settings relating to DDNS ........................................................176
15.5.1 Configuration of the DDNS service (Example of the “Viewnetcam.com” service) ........177
15.5.2 When using the “Viewnetcam.com” service .................................................................178
15.5.3 Procedure to register information for the “Viewnetcam.com” service ...........................179
15.5.4 Checking the information registered for the “Viewnetcam.com” service ......................180
15.5.5 When using “Dynamic DNS Update” ............................................................................180
15.5.6 When using “Dynamic DNS Update(DHCP)” ...............................................................181
16 Configure the settings relating to the schedules [Schedule] ..........182
16.1 How to set the schedules .............................................................................................185
16.2 How to delete the set schedule ....................................................................................187
17 Maintenance of the camera [Maintenance] ........................................189
17.1 Check the system log [System log] .............................................................................189
17.2 Upgrade the firmware [Upgrade] .................................................................................189
17.3 Check the status [Status] .............................................................................................191
17.4 Reset the settings/Reboot the camera [Default reset] ...............................................192
17.5 Settings data/backing up or restoring logs [Data] .....................................................193
18 Using the CD-ROM ...............................................................................196
18.1 About the CD launcher .................................................................................................196
18.2 Installing Panasonic “IP Setting Software” ................................................................197
18.3 Installing the manuals ..................................................................................................198
18.4 Installing the Viewer software ......................................................................................198
18.5 Configure the network settings of the camera using the Panasonic “IP Setting
Software” .......................................................................................................................199
19 About the displayed system log .........................................................202
20 Troubleshooting ...................................................................................206
21 Directory structure of drive B .............................................................217
6 Operating Instructions
Table of Contents

1 Monitor images on a PC
The following are descriptions of how to monitor images from the camera on a PC.
1.1 Monitor images from a single camera
1. Start up the web browser.
2. Enter the IP address designated using the Panasonic “IP Setting Software” in the address box of the
browser.
•Example when entering an IPv4 address: http://URL registered using IPv4 address
http://192.168.0.10/
•Example when entering an IPv6 address: http://[URL registered using IPv6 address]
http://[2001:db8::10]/
<Example of IPv4 access>
<Example of IPv6 access>
IMPORTANT
•When the HTTP port number is changed from “80”, enter “http://IP address of the camera + : (colon)
+ port number” in the address box of the browser. (Example: http://192.168.0.11:8080)
•When the PC is in a local network, configure the proxy server setting of the web browser (under
[Internet Options...] under [Tools] of the menu bar) to bypass the proxy server for the local address.
Note
•Refer to page 169 for further information about the case in which “HTTPS” is selected for
“HTTPS” - “Connection” on the [Advanced] tab of the “Network” page (®page 144).
Operating Instructions 7
1 Monitor images on a PC

3. Press the [Enter] key on the keyboard.
→The “Live” page will be displayed. Refer to page 19 for further information about the “Live” page.
When “On” is selected for “User auth.”, the authentication window will be displayed before displaying live
images for the user name and password entries. The default user name and password are as follows.
User name: admin
Password: 12345
IMPORTANT
•To enhance the security, change the password for the user name “admin”. It is recommended to change
this password periodically.
•When displaying multiple H.264 images on a PC, images may not be displayed depending on the
performance of the PC.
Note
•The maximum number of concurrent access user is 14 including users who is receiving H.264 images
and users who are receiving JPEG images. Depending on the set values for “Bandwidth control(bit
rate)” and “Max bit rate (per client)”, the maximum concurrent access number may be 14 or less users.
When 14 users are concurrently accessing, the access limit message will be displayed for users who
subsequently attempt to access. When “Multicast” is selected for “Transmission type” of “H.264”, only
the first user who accessed to monitor H.264 images will be included in the maximum number. The
second and subsequent users who are monitoring H.264 images will not be included in the maximum
number.
•When “On” is selected for “H.264 transmission” (®page 84), H.264 images will be displayed. When
“Off” is selected, a JPEG image will be displayed. It is possible to display a JPEG image even when
“On” is selected for “H.264 transmission”. In this case, the refresh interval of JPEG images will be
limited to 5fps.
•The refresh interval may become longer depending on a network environment, PC performance,
photographic subject, access traffic, etc.
<Refresh interval of JPEG images>
When “On” is selected for “H.264 transmission”
max. 5fps
When “Off” is selected for “H.264 transmission”
Becomes as follows depending on the setting for “Image capture mode”.
–4M Fisheye: max. 30fps
8 Operating Instructions
1 Monitor images on a PC

–9M Fisheye/Double Panorama/Panorama/Quad PTZ/Single PTZ/4M Fisheye + Double
Panorama/4M Fisheye + Panorama/4M Fisheye + Quad PTZ: max. 15fps
–8M Fisheye + Double Panorama/8M Fisheye + Panorama/8M Fisheye + Quad PTZ: max. 6fps
Note that JPEG images cannot be displayed when Quad stream is selected.
1.2 About live image types
The type of images displayed on the “Live” page can be selected using “Image capture mode” on the [JPEG/
H.264] tab of the “Image/Audio” page of the setup menu. (®page 80)
Configure the type, operation, and resolution of live images on this section.
1.2.1 Type of images that can be displayed according to the image
setting
There are 3 types of settings for Image capture mode: “1 Monitor”, “2 Monitor”, and “Quad stream”. The type
of images that can be displayed and the supported mounting positions differ for each type. Check which images
can be displayed in the following table.
Refer to page 10 for further information about “Image capture mode”.
Refer to page 11 for information about each image.
Image capture mode
type Image capture mode Image types Mounting positions
1 Monitor
This type transmits 1
type of image.
9M Fisheye
4M Fisheye
Fisheye ceiling, wall
Double Panorama Double Panorama ceiling
Panorama Panorama wall*1
Quad PTZ Quad PTZ ceiling, wall
Single PTZ Single PTZ ceiling, wall
2 Monitor
This type transmits 2
types of images.
8M Fisheye + Double
Panorama
4M Fisheye + Double
Panorama
Fisheye, Double
Panorama
ceiling
8M Fisheye + Panorama
4M Fisheye + Panorama
Fisheye, Panorama wall*1
8M Fisheye + Quad PTZ
4M Fisheye + Quad PTZ
Fisheye, Quad PTZ ceiling, wall
Quad stream
This type transmits 4
types of images with H.
264 and can also
transmit a single screen
image containing the 4
types of images
combined together.
Quad stream Quad stream (each
stream with Single PTZ),
Quad PTZ
ceiling
Operating Instructions 9
1 Monitor images on a PC

*1 Ceiling mounting may also be possible depending on the mounting conditions.
1.2.2 About image capture mode
The maximum image capture size that can be configured is 9 megapixel (2992(H)x2992(V)).
The following types of images can be transmitted by each mode.
Image capture
mode Description
9M Fisheye Fisheye images are transmitted. (Max. 15fps)
The maximum image capture size that can be configured is 9 megapixel (2992
(H)x2992(V)).
4M Fisheye Fisheye images are transmitted. (Max. 30fps)
The maximum image capture size that can be configured is 4 megapixel (2048
(H)x2048(V)).
Double Panorama Double Panorama images are transmitted. (Max. 15fps)
The maximum image capture size that can be configured is 3.5 megapixel (2560
(H)x1440(V)).
Panorama Panorama images are transmitted. (Max. 15fps)
The maximum image capture size that can be configured is 3.5 megapixel (2560
(H)x1440(V)).
Quad PTZ Quad PTZ images are transmitted. (Max. 15fps)
The maximum image capture size that can be configured is 5 megapixel (2560
(H)x1920(V)).
Single PTZ Single PTZ images are transmitted. (Max. 15fps)
The maximum image capture size that can be configured is 5 megapixel (2560
(H)x1920(V)).
8M Fisheye +
Double Panorama
Fisheye images and Double Panorama can be transmitted at the same time. (Max.
7.5fps)
The maximum image capture size that can be configured for Fisheye images is 8
megapixel (2816(H)x2816(V)), and for Double Panorama images is 1 megapixel (1280
(H)x720(V)).
4M Fisheye +
Double Panorama
Fisheye images and Double Panorama images can be transmitted at the same time.
(Max. 15fps)
The maximum image capture size that can be configured for Fisheye images is 4
megapixel (2048(H)x2048(V)), and for Double Panorama images is 1 megapixel (1280
(H)x720(V)).
8M Fisheye +
Panorama
Fisheye images and Panorama images can be transmitted at the same time. (Max.
7.5fps)
The maximum image capture size that can be configured for Fisheye images is 8
megapixel (2816(H)x2816(V)), and for Panorama images is 1 megapixel (1280
(H)x720(V)).
10 Operating Instructions
1 Monitor images on a PC

Image capture
mode Description
4M Fisheye +
Panorama
Fisheye images and Panorama images can be transmitted at the same time. (Max.
15fps)
The maximum image capture size that can be configured for Fisheye images is 4
megapixel (2048(H)x2048(V)), and for Panorama images is 1 megapixel (1280
(H)x720(V)).
8M Fisheye +
Quad PTZ
Fisheye images and Quad PTZ images can be transmitted at the same time. (Max.
7.5fps)
The maximum image capture size that can be configured for Fisheye images is 8
megapixel (2816(H)x2816(V)), and for Quad PTZ images is 1.3 megapixel (1280
(H)x960(V)).
4M Fisheye +
Quad PTZ
Fisheye images and Quad PTZ images can be transmitted at the same time. (Max.
15fps)
The maximum image capture size that can be configured for Fisheye images is 4
megapixel (2048(H)x2048(V)), and for Quad PTZ images is 1.3 megapixel (1280
(H)x960(V)).
Quad stream 4 types of Single PTZ images can be transmitted. (max. 15fps)
A single screen image containing the 4 types of images combined together can also
be transmitted. (max. 5fps)
Only H.264 images can be sent.
The maximum image capture size that can be configured for Single PTZ (Quad stream)
is 1.3 megapixel (1280(H)x960(V)), and for Quad stream is 5 megapixel (2560
(H)x1920(V)).
1.3 Image types
1. Double Panorama
In Double Panorama, the panorama image is displayed with distortion correction performed on a 180° image
for half of a fisheye image. Note that the center of a fisheye image is a blind spot and it is not displayed in the
fisheye image.
To divide the screen left-to-right or top-to-bottom, refer to the information in the Installation Guide and rotate
the image 45° to the left or right using the image rotation gear.
Operating Instructions 11
1 Monitor images on a PC

2. Panorama
In Panorama, the panorama image is displayed with distortion correction performed on the 180° horizontal
angle view part of the center of a fisheye image.
3. Quad PTZ
In the Quad PTZ screen, distortion in 4 fisheye images are corrected and the corrected images are displayed
together.
1
3
2
4
1
3
2
4
When an image is clicked by the mouse, the clicked position becomes the center of the image (Click &
Centering).
The display position of images can also be changed from the fisheye control screen.
12 Operating Instructions
1 Monitor images on a PC

Fisheye Control
When the [Fisheye Control] button is clicked on the Quad PTZ or Single PTZ screen, the “Fisheye Control”
window is displayed.
1
3
2
4
From this window, the image position of each screen number can be changed.
By dragging and dropping the number icon on the screen onto the image, you can change the center of the
image to where the icon was dropped.
The red number icon is the selected number.
Select the “Refresh interval” value of “Fisheye Control” images from the following.
1s/ 3s/ 5s/ 10s/ 30s/ 60s
4. Single PTZ
In the Single PTZ screen, distortion in 1 fisheye image is corrected and the corrected image is displayed in a
4:3 image.
When the mouse button is used to click on an image, the clicked position of this image can be moved to the
center of the image (Click & Centering).
Operating Instructions 13
1 Monitor images on a PC

The display position of images can also be changed from the fisheye control screen.
5. Quad stream
In the Quad stream, each of the four 4:3 images that had their distortions corrected are assigned a stream
number, and then displayed as H.264 images.
When H.264(2) is used, the 4 corrected images can be combined together to a single screen image and
transmitted.
1
3
2
4
1
2
3
4
12
34
H.264(1)
H.264(2)
14 Operating Instructions
1 Monitor images on a PC

6. Fisheye
The 360° view is displayed without performing distortion correction as a fisheye image.
1.4 About image types and available functions
The following is a list of functions that can be used on the “Live” page according to the image type.
Double
Panorama Panorama Quad PTZ Single PTZ Quad stream Fisheye
[select language]
pull-down menu
ü ü ü ü ü ü
[Setup] button ü ü ü ü ü ü
[Live] button ü ü ü ü ü ü
[Compression]
buttons
ü ü ü ü x*1 ü
[Image capture size]
buttons (when
“JPEG” is selected)
ü ü ü ü x*1 ü
[Stream] buttons
(when “H.264” is
selected)
1, 2*2 1, 2*2 1, 2*2 1, 2*2 1, 2, 3, 4,
Quad PTZ
1, 2
[Zoom] buttons*6 ü ü x x x ü
[Brightness] buttons ü ü ü ü ü ü
[AUX] buttons ü ü ü ü ü ü
Operating Instructions 15
1 Monitor images on a PC

Double
Panorama Panorama Quad PTZ Single PTZ Quad stream Fisheye
[Rec. on SD] button ü ü ü ü ü ü
[Log] button ü ü ü ü ü ü
[Multi-screen] ü ü ü ü ü ü
SD recording status
indicator
ü ü ü ü ü ü
Camera title ü ü ü ü ü ü
Alarm occurrence
indication button
ü ü ü ü ü ü
Full screen button ü ü ü ü ü ü
Snap shot button ü ü ü ü xü
Mic input button ü ü ü ü ü ü
Audio output button ü ü ü ü ü ü
Auto pan x x ü*3 ü ü*8 x
Preset sequence x x ü ü ü x
[Fisheye Control]
button
x x ü ü ü x
Control Image x x üx*4 üx
Preset x x ü*5 ü ü x
[Zoom] buttons*7 x x ü*5 ü ü x
Control pad/buttons x x ü*5 ü ü x
ü = Available
x = Not available
*1 Because only H.264 transmission can be used, switching between H.264 and JPEG images, and changing the image capture size
setting of JPEG images is not possible.
*2 When the “Image capture mode” type is “2 Monitor”, the [Fisheye] button, [Double panorama] button, [Panorama] button, and [Quad
PTZ] button are displayed and images can be selected.
*3 Only operates on the top left image in Quad PTZ.
*4 The [Control Image] pull-down menu is displayed in gray and cannot be operated.
*5 Operations for the screen selected in the “Live” page, or the screen of the screen number selected in the [Control Image] pull-down
menu can be performed.
*6 The camera’s zoom can be operated with the [´1], [´2], and [´4] buttons on the left-hand side of the “Live” page.
*7 The camera’s zoom can be operated with the [–], [´1], and [+] buttons on the bottom of the “Live” page.
*8 Only operates in Ch1.
1.4.1 About available resolutions
An image can be displayed in any of the following resolutions depending on “Image capture mode” on the
“Live” page (except for multi-screen display).
16 Operating Instructions
1 Monitor images on a PC

Image capture
mode H.264(1) H.264(2) JPEG(1) JPEG(2)
9M Fisheye Fisheye:
2992x2992
1280x1280
640x640
320x320
Fisheye:
1280x1280
640x640
320x320
Fisheye:
2992x2992
1280x1280
640x640
320x320
–
4M Fisheye Fisheye:
2048x2048
1280x1280
640x640
320x320
Fisheye:
1280x1280
640x640
320x320
Fisheye:
2048x2048
1280x1280
640x640
320x320
Fisheye:
1280x1280
640x640
320x320
Double Panorama Double
Panorama:
2560x1440
1920x1080
1280x720
640x360
320x180
Double
Panorama:
1920x1080
1280x720
640x360
320x180
Double
Panorama:
2560x1440
1920x1080
1280x720
640x360
320x180
Double
Panorama:
1920x1080
1280x720
640x360
320x180
Panorama Panorama:
2560x1440
1920x1080
1280x720
640x360
320x180
Panorama:
1920x1080
1280x720
640x360
320x180
Panorama:
2560x1440
1920x1080
1280x720
640x360
320x180
Panorama:
1920x1080
1280x720
640x360
320x180
Quad PTZ Quad PTZ:
2560x1920
2048x1536
1600x1200
1280x960
800x600
VGA
QVGA
Quad PTZ:
1280x960
800x600
VGA
QVGA
Quad PTZ:
2560x1920
2048x1536
1600x1200
1280x960
800x600
VGA
QVGA
Quad PTZ:
1280x960
800x600
VGA
QVGA
Single PTZ Single PTZ:
2560x1920
2048x1536
1600x1200
1280x960
800x600
VGA
QVGA
Single PTZ:
1280x960
800x600
VGA
QVGA
Single PTZ:
2560x1920
2048x1536
1600x1200
1280x960
800x600
VGA
QVGA
Single PTZ:
1280x960
800x600
VGA
QVGA
8M Fisheye +
Double Panorama
Fisheye:
2816x2816
1280x1280
640x640
320x320
Double
Panorama:
1280x720
640x360
Fisheye:
2816x2816
1280x1280
640x640
320x320
Double
Panorama:
1280x720
640x360
Operating Instructions 17
1 Monitor images on a PC

Image capture
mode H.264(1) H.264(2) JPEG(1) JPEG(2)
4M Fisheye +
Double Panorama
Fisheye:
2048x2048
1280x1280
640x640
320x320
Double
Panorama:
1280x720
640x360
Fisheye:
2048x2048
1280x1280
640x640
320x320
Double
Panorama:
1280x720
640x360
8M Fisheye +
Panorama
Fisheye:
2816x2816
1280x1280
640x640
320x320
Panorama:
1280x720
640x360
Fisheye:
2816x2816
1280x1280
640x640
320x320
Panorama:
1280x720
640x360
4M Fisheye +
Panorama
Fisheye:
2048x2048
1280x1280
640x640
320x320
Panorama:
1280x720
640x360
Fisheye:
2048x2048
1280x1280
640x640
320x320
Panorama:
1280x720
640x360
8M Fisheye + Quad
PTZ
Fisheye:
2816x2816
1280x1280
640x640
320x320
Quad PTZ:
1280x960
800x600
VGA
Fisheye:
2816x2816
1280x1280
640x640
320x320
Quad PTZ:
1280x960
800x600
VGA
4M Fisheye + Quad
PTZ
Fisheye:
2048x2048
1280x1280
640x640
320x320
Quad PTZ:
1280x960
800x600
VGA
Fisheye:
2048x2048
1280x1280
640x640
320x320
Quad PTZ:
1280x960
800x600
VGA
Quad stream Quad stream:
1280x960
800x600
VGA
QVGA
Quad PTZ:
2560x1920
2048x1536
1600x1200
1280x960
800x600
VGA
QVGA
– –
IMPORTANT
•1280x1280 cannot be selected when “9M Fisheye” is selected for “Image capture mode”, and
“On(PAL)” or “On(NTSC)” is selected for “Monitor out”.
•When “Quad stream” mode is used, 2560x1920 cannot be selected for H.264(2) if 1280x960 is selected
for H.264(1).
18 Operating Instructions
1 Monitor images on a PC

1.5 About the “Live” page
Note
•Depending on the “Image capture mode” settings, the type of functions that can be used differ and the
displayed buttons change. Refer to page 15.
B
A
C
E
D
F
H
I
J
K
L
G
R
STUVW
NOP
Q
M
XYZ
a
[select language] pull-down menu
The camera’s display language can be selected. The default language can be set in the [Language] in the
[Basic] settings. (®page 62)
[Setup] button*1
Displays the setup menu. The button will turn green and the setup menu will be displayed.
[Live] button
Display the “Live” page. The button will turn green and the “Live” page will be displayed.
[Compression] buttons
•[H.264] button: The letters “H.264” on the button will turn green and an H.264 image will be displayed.
When “On” is selected for “H.264 transmission” of “H.264(1)” or “H.264(2)”, the [H.264] button will be
displayed. (®page 84)
•[JPEG] button: The letters “JPEG” on the button will turn green and JPEG image will be displayed.
[Stream] buttons
These buttons will be displayed only when an H.264 image is displayed.
•[1] button: The letter “1” will turn green and images in the main area will be displayed in accordance
with the setting of “H.264(1)”. (®page 84)
•[2] button: The letter “2” will turn green and images in the main area will be displayed in accordance
with the setting of “H.264(2)”. (®page 84)
Operating Instructions 19
1 Monitor images on a PC

Note
•When “Quad stream” is selected for “Image capture mode”, the channel can be changed by clicking
on the buttons ([1] to [4]). The button turns green and the “Live” page of the selected channel is
displayed. The [Quad PTZ] button is displayed and images can be selected.
•When the “Image capture mode” type is “2 Monitor”, the [Fisheye], [Double panorama],
[Panorama], and [Quad PTZ] buttons are displayed and images can be selected.
[Image capture size] buttons
These buttons will be displayed only when a JPEG image is displayed.
The images that can be selected vary depending on the “Image capture mode” setting on the setup menu.
(®page 10)
Note
•Images are displayed in the image capture size selected in “JPEG(1)” or “JPEG(2)” of [JPEG] on
the [JPEG/H.264] tab.
•With the following “Image capture mode” settings, the refresh interval of JPEG images is limited to
a maximum of 15fps.
–9M Fisheye
–Double Panorama
–Panorama
–Quad PTZ
–Single PTZ
–4M Fisheye + Double Panorama
–4M Fisheye + Panorama
–4M Fisheye + Quad PTZ
•With the following “Image capture mode” settings, the refresh interval of JPEG images is limited to
a maximum of 6fps.
–8M Fisheye + Double Panorama
–8M Fisheye + Panorama
–8M Fisheye + Quad PTZ
•When JPEG images and H.264 images are transmitted simultaneously, the refresh interval of JPEG
images will be limited to a maximum of 5fps.
•The image may become smaller than the actual size depending on the window size of the web
browser.
[Zoom] buttons (when the image type is Fisheye, Panorama, or Double Panorama)
Images will be zoomed in on with the electronic zoom by the viewer software “Network Camera View
4S”.
•[x1] button: The letter “x1” will turn green and images in the main area will be displayed at x1.
•[x2] button: The letter “x2” will turn green and images in the main area will be displayed at x2.
•[x4] button: The letter “x4” will turn green and images in the main area will be displayed at x4.
[Brightness] buttons*2
The brightness is adjustable from 0 to 255.
•(darker) button: Images become darker.
•button: The adjusted brightness will return to the default brightness (64).
•(brighter) button: Images become brighter.
20 Operating Instructions
1 Monitor images on a PC