Panasonic SH-FX85P User manual

nRF SECTION
Wireless module
Frequency range 2.400 to 2.4835 GHz
Number of channels 3
Music Port (Rear)
Sensitivity 100 mV, 4.7 kΩ
Terminal Stereo, 3.5 mm (1/8”) jack
nAMPLIFIER SECTION
Output power
RMS output power
Front Ch 90 W per channel (3Ω),1kHz,10%
THD
Total RMS power 180 W
FTC output power stereo mode
Front Ch 17.5 W per channel (3Ω), 150 Hz-20
kHz, 1 % THD
Total FTC stereo mode power 35 W
nSPEAKER SECTION
Type 1 way, 1 speaker system (Bass
reflex)
(L and R ch in one box)
Speaker unit(s)
Full range 6.5 cm (2-1/2”) Cone type
Output sound pressure 80 dB/W (1.0 m)
Frequency range 88 Hz - 25 kHz (-16 dB)
©2007 Matsushita Electric Industrial Co. Ltd.. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
SH-FX85P
SH-FX85PC
SH-FX85TPP
SB-FX85P
SB-FX85PC
Colour
(K)..........Black Type
106 Hz - 22 kHz (-10 dB)
nGENERAL
Power supply AC 120 V, 60Hz
Power consumption
Digital transmitter 1.7 W
Wireless sound system 38 W
Dimensions (W x H x D)
Digital transmitter 65 mm x 52 mm x 8.6 mm
(2-9/16” x 2-1/16” x 11/32”)
Wireless sound system 430 mm x 170.5 mm x 189 mm
(16-15/16” x 6-23/32” x 7-6/16”)
Mass
Digital transmitter 0.02 kg (0.04 lbs)
Wireless sound system 2.03 kg (4.47 lbs)
Operating temperature range +5°Cto+35°C(+41°Fto+95°F)
Operating humidity range 5 % to 90 % RH (no condensation)
Power consumption in off mode approx. 4.5 W
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate
2. Total harmonic distortion is measured by a digital spectrum
analyzer
Power supply:
This model uses Switching Mode Power Supply (SMPS) Module for
powering the receiver unit. It is replaceable as an assembly unit.
Wireless Sound System
Specification
ORDER NO. MD0703043CE
A6

1 Note 3
1.1. System Combination Breakdown 3
2 Safety Precautions 4
2.1. GENERAL GUIDELINES 4
2.2. Before Repair and Adjustment (Digital Receiver SB-FX85)
4
2.3. Protection Circuitry 5
2.4. Safety Part Information 5
3 Prevention of Electro Static Discharge (ESD) to
Electrostatically Sensitive (ES) Devices 6
4 Handling the Lead-free Solder 7
4.1. Service caution based on legal restrictions 7
5 Accessories 8
6 Using of Digital Receiver Unit 9
6.1. Connecting the digital transmitter (SH-FX85T) 9
6.2. AC Power Cord connection (SB-FX85) 9
6.3. Making the wireless link (SB-FX85) 9
7 Operation Procedures 10
7.1. Remote Control Key Buttons Operations (SA-PT650P/PC-
S) 10
7.2. Main Unit Key Buttons Operations (SA-PT650P/PC-S) 11
7.3. Digital Receiver Operations (SB-FX85) 11
7.4. Digital Receiver Operations as stand-alone audio amplifier
(SB-FX85) 12
8 New Features 13
8.1. Wireless Features 13
9 Self-Diagnosis and Special Mode Setting 20
9.1. Wireless Service Mode Summary Table 20
9.2. Service Mode Table (Wireless) 21
10 Assembling and Disassembling 23
10.1. Note 23
10.2. Disassembly flow chart (For SB-FX85) 24
10.3. Main Parts Location Diagram 24
10.4. Disassembly of Digital Receiver (SB-FX85P/PC) 25
10.5. Disassembly of Transmitter Module P.C.B (SH-FX85T) 37
11 Service Positions 38
11.1. Checking of Panel, RF Adapter, and Receiver Module
P.C.B. 38
11.2. Checking of D-Amp, and D-Port P.C.B. 39
12 Voltage Measurement & Waveform Chart 40
12.1. Voltage Measurement 40
12.2. Waveform Chart 42
13 Wiring Connection Diagram 43
14 Block Diagram 45
14.1. DIGITAL AMPLIFIER/D PORT/PANEL BLOCK DIAGRAM
45
14.2. RECEIVER MODULE BLOCK DIAGRAM 46
14.3. TRANSMITTER MODULE BLOCK DIAGRAM 47
15 Notes of Schematic Diagram 49
16 Schematic Diagram 51
16.1. D-AMP CIRCUIT 51
16.2. PANEL CIRCUIT 53
16.3. D-PORT CIRCUIT and RF ADAPTER CIRCUIT 54
16.4. RECEIVER MODULE CIRCUIT 55
16.5. TRANSMITTER MODULE CIRCUIT 59
17 Printed Circuit Board Diagram 63
17.1. D-AMP P.C.B. , RECEIVER MODULE P.C.B. 63
17.2. PANEL P.C.B. , D-PORT P.C.B. , RF ADAPTER P.C.B.
64
17.3. TRANSMITTER MODULE P.C.B 65
18 Illustration of IC's, Transistors and Diodes 67
19 Terminal Functions of Integrated Circuits 68
19.1. IC10 (C1AB00002772): IC BASE BAND 68
19.2. IC13 (C1CB00002648): IC RF 68
19.3. IC1000 (C2BBYY000375): IC MCU 69
20 Exploded Views 71
20.1. Cabinet Parts Location 71
20.2. Packaging 72
21 Service Hint 73
21.1. TX / RX KIT ASSEMBLY 73
21.2. TX CASE ASSEMBLY 73
22 Replacement Parts List 74
22.1. Part List (SB-FX85) 74
22.2. Part List (SH-FX85) 78
CONTENTS
Page Page
2
SH-FX85P / SH-FX85PC

1 Note
1.1. System Combination Breakdown
Note: The table below show the breakdown for the digital transmitter and wireless system.
table 1
Digital Tx & Rx System SH-FX85P/PC-K
Digital Transmitter SH-FX85TPP-K
Digital Receiver SB-FX85P/PC-K
3
SH-FX85P / SH-FX85PC

(This “Safety Precaution” is applied only in U.S.A.)
2 Safety Precautions
2.1. GENERAL GUIDELINES
1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or
damaged by the short circuit.
2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly
installed.
3. After servicing, make the following leakage current checks to prevent the customer from being exposed to shock hazards.
1. Before servicing, unplug the power cord to prevent an electric shock.
2. When replacing parts, use only manufacturer’s recommended components for safety.
3. Check the condition of the power cord. Replace if wear or damage is evident.
4. After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc.
5. Before returning the serviced equipment to the customer, be sure to make the following insulation resistance test to prevent the
customer from being exposed to a shock hazard.
2.1.1. LEAKAGE CURRENT COLD CHECK
1. Unplug the AC cord and connect a jumper between the two prongs on the plug.
2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on
the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the
chassis, the reading should be between 1MΩand 5.2Ω.
When the exposed metal does not have a return path to the chassis, the reading must be .
2.1.2. LEAKAGE CURRENT HOT CHECK (See Figure 1.)
1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check.
2. Connect a 1.5kΩ, 10 watts resistor, in parallel with a 0.15µF capacitors, between each exposed metallic part on the set and a
good earth ground such as a water pipe, as shown in Figure 1.
3. Use an AC voltmeter, with 1000 ohms/volt or more sensitivity, to measure the potential across the resistor.
4. Check each exposed metallic part, and measure the voltage at each point.
5. Reverse the AC plug in the AC outlet and repeat each of the above measurements.
6. The potential at any point should not exceed 0.75 volts RMS. A leakage current tester (Simpson Model 229 or equivalent) may
be used to make the hot checks, leakage current must not exceed 1/2 milliamp. In case a measurement is outside of the limits
specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to
the customer.
Figure. 1
2.2. Before Repair and Adjustment (Digital Receiver SB-FX85)
This model uses switching mode power supply (SMPS) module to provide the necessary voltages for the receiver (SB-FX85)
DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
Current consumption at AC 120V, 60Hz in NO SIGNAL mode (at volume minimum) should be ~180 mA.
4
SH-FX85P / SH-FX85PC

2.3. Protection Circuitry
The protection circuitry may have operated if either of the following conditions are noticed:
· No sound is heard when the power is turned on.
· Stops during a performance.
The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are
“shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
If this occurs, follow the procedure outlines below:
1. Turn off the power.
2. Determine the cause of the problem and correct it.
3. Turn on the power once again after one minute.
Note:
When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
2.4. Safety Part Information
Safety Parts List:
There are special components used in this equipment which are important for safety.These parts are marked by in the
Schematic Diagrams & Replacement Parts List. It is essential that these critical parts should be replaced with manufacturer’s
specified parts to prevent shock, fire or other hazards. Do not modify the original design
without permission of manufacturer.
Table 1
Reference No. Part No. Part Name & Description Remarks
A1 K2CB2CB00021 AC CORD
7N0AB6GY00004 SMPS MODULE UNIT
F1 K5D312BNA005 FUSE
5
SH-FX85P / SH-FX85PC

3 Prevention of Electro Static Discharge (ESD) to
Electrostatically Sensitive (ES) Devices
Some semiconductor (solid state) devices can be damaged easily by electricity. Such components commonly are called
Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and
semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage
caused by electro static discharge (ESD).
1. Immediately before handling any semiconductor component or semiconductor-equiped assembly, drain off any ESD on your
body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap,
which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equiped with ES devices, place the assembly on a conductive surface such as aluminium
foil, to prevent electrostatic charge build up or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static (ESD protected)” can
generate electrical charge to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most
replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminium foil or
comparable conductive material).
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material
to the chassis or circuit assembly into which the device will be installed.
Caution
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the
brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD)
sufficient to damage an ES device).
6
SH-FX85P / SH-FX85PC

4 Handling the Lead-free Solder
4.1. Service caution based on legal restrictions
4.1.1. General description about Lead Free Solder (PbF)
The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this
equipment in considering the globally environmental conservation.
The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin
(Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86°F) more than that
of the normal solder.
Definition of PCB Lead Free Solder being used
The letter of “PbF” is printed either foil side or components side on the PCB using the lead free solder.
(See right figure)
Service caution for repair work using Lead Free Solder (PbF)
· The lead free solder has to be used when repairing the equipment for which the lead free solder is used.
(Definition: The letter of “PbF” is printed on the PCB using the lead free solder.)
· To put lead free solder, it should be well molten and mixed with the original lead free solder.
· Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC.
· Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt
the lead free solder.
· Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30
degrees C (662±86°F).
Recommended Lead Free Solder (Service Parts Route.)
· The following 3 types of lead free solder are available through the service parts route.
RFKZ03D01K-----------(0.3mm 100g Reel)
RFKZ06D01K-----------(0.6mm 100g Reel)
RFKZ10D01K-----------(1.0mm 100g Reel)
Note
* Ingredient: Tin (Sn), 96.5%, Silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%
7
SH-FX85P / SH-FX85PC

5 Accessories
Note : Refer to Packing Materials & Accessories Parts List (Section 22) for the part number.
8
SH-FX85P / SH-FX85PC

6 Using of Digital Receiver Unit
6.1. Connecting the digital transmitter (SH-FX85T)
6.2. AC Power Cord connection (SB-FX85)
6.3. Making the wireless link (SB-FX85)
9
SH-FX85P / SH-FX85PC

7 Operation Procedures
7.1. Remote Control Key Buttons Operations (SA-PT650P/PC-S)
This function is available only when using the optional
Panasonic wireless sound system SH-FX85.
[2ND SELECT]
: Change the source for the second
room
MAIN SOURCE (follows the selected source for the
main room) (FM AM) XM OPTION
Return to MAIN SOURCE
If the main room is in FM/AM mode, you can only
select the same mode for the FM/AM tuner of the
second room.
For details, refer to the operating instructions for the
optional Panasonic wireless sound system SH-FX85.
CANCEL
- CD MODE
- EQ
- SLEEP
- SW.LEVEL
FL DISPLAY
PLAY MODE
- CH SELECT
- TEST
PL
S.SRD
Select disc s title numbers etc./Enter numbers
Basic operations for play
Show a disc top menu or program list
Show on-screen menu
Show a disc menu or play list
Return to previous screen
or show the setup menu
Select the disc or show disc information
Turn the unit off automatically (Sleep timer)
1 Press and hold the button.
2 While the time is shown, press the button repeatedly to select
the time (in minutes).
The maximum setting is 120-min (in 30-min steps)
Press and hold the button again to confirm the remaining time
on the unit s display.
Start up and play a disc automatically
Select preset radio stations/channels
Select the source
[DVD]: DVD/CD
[TUNER/BAND]: FM/AM, XM
[EXT-IN]: MUSIC P., AUX, OPTION
Frame-by-frame/Select or register menu items on the
television screen /Browse XM radio categories
Select radio stations/channels manually
Mute the sound
MUTING flashes in the main unit s display while the
function is on.
To cancel, press the button again or adjust the volume.
Muting is canceled when you switch the unit to standby.
Adjust the volume of the main unit
Turn the main unit on/off
Television operations
*
*
10
SH-FX85P / SH-FX85PC

7.2. Main Unit Key Buttons Operations (SA-PT650P/PC-S)
VOLUME
MUSIC PORT
Connect an external
device
Skip or slow-search play/
Select the radio stations/channels
5 DISC SELECTOR
Select a disc directly
SELECTOR
DVD/CD FM AM XM
AUX MUSIC P. OPTION
Return to DVD/CD
Display
DISC EXCHANGE
Open the disc drawer to
exchange the disc in the play
position
DISC SKIP
Skip to the next disc tray
Headphones
(not included)
Remote control signal sensor
Adjust the volume
of the main unit.
TUNING
,Headphone plug type:
3.5 mm (1/8) stereo mini plug
Reduce the volume before
connecting.
Audio is automatically switched to
2-channel stereo.
To prevent hearing damage, avoid
listening for prolonged periods of
time.
"
OPEN/CLOSE
Open/Close the disc drawer
/ -TUNE MODE / FM MODE
Stop playing/
Select the tuning mode
Adjust the FM reception condition
Play discs/
Memorize the receivngi
radio stations/channels
/MEMORY
Turn the main unit on/off.
Press to switch the unit from on to
standby mode or vice versa. In standby
mode, the unit is still consuming a small
amount of power.
Standby/on switch [POWER ]
7.3. Digital Receiver Operations (SB-FX85)
11
SH-FX85P / SH-FX85PC

7.4. Digital Receiver Operations as stand-alone audio amplifier (SB-FX85)
12
SH-FX85P / SH-FX85PC

8 New Features
8.1. Wireless Features
8.1.1. Function Overview
Year 2007 PT models support wireless which includes FX65/FX66, wireless subwoofer and FX85 as described below:-
8.1.1.1. FX65/FX66
· The FX65/FX66 supports one-way wireless transmission only, that is, it will only transmit wireless audio signal to the rear
surround speakers. The FX65/FX66 receiver module includes a D-AMP and SMPS. The transmitter interfaces with the main unit
using serial communications to communicate information such as mute command request, link detection and ID setting request.
Maximum range attainable is 15 meters.
8.1.1.2. Wireless Subwoofer (For PT1050 only)
· The wireless subwoofer receiver module is similar in operation with FX65/FX66 in such a way that it only supports one-way
wireless transmission. It also includes a D-AMP and SMPS. The difference in the wireless subwoofer receiver module is the way
its hardware interprets the audio it receives from the transmitter since it is the same audio received by the FX65/FX66 receiver.
Maximum range attainable is 30 meters.
8.1.1.3. FX85
· The FX85 supports the multi-room function wherein it operates as a second room wireless receiver (up to a maximum of two).
Maximum range attainable is 30 meters. It can send commands to the main unit to control functions such as Play, Stop,
Forward Skip/Channel Up, Reverse Skip/Channel Down. It also has a built-in DAP pocket for stand-alone operation by inserting
a DAP device (e.g. iPod) in the DAP pocket to play the device only via the device’s own control buttons, FX85 cannot control
the device using its own buttons. The transmitter interfaces with the main unit using serial communications to communicate
information such as mute command request, link detection, ID setting request and button commands from the FX85 buttons
(Play, Stop, Forward Skip/Channel Up, Reverse Skip/Channel Down). The FX85 receiver module has the following
functions/terminals/buttons:
FX85 BUTTONS FX85 FUNCTIONS
FX 85 Power Button D-Amp
Selector Button SMPS
Play Button D-Port Connector
Stop Button ID Set Switch
Forward Skip/Channel Up MPort
Reverse Skip/Channel Down
Volume Control
8.1.2. Block Diagram
· There are two types of transmitter cards, Type A and Type B, and two types of receiver modules, Type 1 and Type 2 for the
wireless configuration. The block diagrams below describe the differences of each of the types.
13
SH-FX85P / SH-FX85PC

8.1.2.1. TX-TYPE A / RX-TYPE 1
ADC
BB
RF
MCU
EEPROM
CH2
IN
DAC
BB
RF
EEPROM
CH2
OUT
Note:
- One way only
- FX65/FX66 signal flow
-FX65/FX66 only
TX Type A RX Type 1
MCU
· Type A transmitter uses one ADC (Analog to Digital Converter) and transmits audio through Channel 2. Type 1 receiver (Rx)
uses one DAC and output audio through Channel 2. The firmware (that is downloaded to EEPROM IC) multiplexes which
channel to listen to (in this case Channel 2 since type A is transmitting from channel 2 In) by setting the baseband accordingly.
14
SH-FX85P / SH-FX85PC

8.1.2.2. TX-TYPE B / RX-TYPE 2
ADC
BB
RF
MCU
EEPROM
ADC
DAC
BB
RF
EEPROM
MCU
CH2
IN
CH1 IN CH2
OUT
Note:
-FX65/FX66 SIGNAL FLOW
- FX85 S
S
IGNAL F
F
LOW
- ONE WAY AND
SIMULTANEOUS
- FX65/FX66 + FX85
- FX65/FX66 TRANSMITTER NOT
USED, NEED TO IDSET
FX65/FX66
- TX TYPE B BUT RX
CHANGED FROM TYPE 2
TO TYPE 1, CH1 SIGNAL
REDIRECTED TO DAC
TX Type B RX Type 2
· Type B transmitter uses two ADC (Analog to Digital Converter) to send audio streams from Channel 1 and Channel 2 for the
FX65/FX66 surround sound and FX85 second room audio, respectively. Type 2 receiver outputs audio through Channel 2. The
software multiplexes which channel to listen to by setting the baseband accordingly. For example, if the receiver is configured
as an FX85 receiver (Type 2), the baseband is configured to accept Channel 1 audio transmission and redirect it to Channel
2 Out. If the receiver is set as an FX65/FX66 or wireless subwoofer, the baseband is configured to accept channel 2 audio
transmission and redirect it to the same Channel 2 Out.
8.1.3. Activation
· FX65/FX66 can be activated in the main unit by using either transmitter Type A or Type B and enabling surround sound by
selecting Surround Music, DPL or Super Surround (Music/Movie).
· FX85 Wireless feature is enabled by default when the user uses transmitter type B.
8.1.4. LED Indication
· For FX65/FX66, there will be two-color LED that will be used to indicate Power On and Link. If link, the two-color LED will be
green, else, it will be red.
For FX85, the front panel will have LED indicators for Standby,, Wireless Link, Charge, Option and Music Port. During Power
On, Standby LED will be OFF. Only during power OFF will this LED be ON (Red). Wireless Link indicator will be ON (Green)
when link is established between TX and RX and OFF when link is lost. Pressing the selector button will toggle from any of the
selector modes Wireless, Option and Music port. Only the currently selected mode will be ON (Green), the other two will be
OFF. Charge LED will be ON (Red) once iPod charging is initiated.
8.1.5. Key Operation (FX85)
· Selector Button
This button will be used to select Wireless, Option or M.Port and enabling the corresponding LED indicators for each mode.
During Power On, by default, selector mode is set to Wireless when power is initially supplied to the system. But during Power
On/OFF button, it will remember the last selector mode setting.
· Play Button
This button will send command to the main unit to play CD/DVD as well as the iPod. This function is therefore meaningful only
if the second room selector is in Main Source (with the first room user in CD/DVD or iPod) and iPod.
15
SH-FX85P / SH-FX85PC

· Stop Button
This button will send command to the main unit to stop CD/DVD as well as the iPod. This function is therefore meaningful only
if the second room selector is in Main Source (if the first room user is in CD/DVD mode or iPod) and iPod.
· Forward Skip/Channel Up
This button depends on the second room source currently selected. It will be interpreted as a Forward Skip by the main unit if
the second room source is in Main Source (with the first room user is in CD/DVD or iPod mode) and iPod. It will be interpreted
as a Channel Up (preset channels only) if the second room source is in FM, AM, or XM.
· Reverse Skip/Channel Down
This button depends on the second room source currently selected. It will be interpreted as a Reverse Skip by the main unit if
the second room source is in Main Source (if the first room user is in CD/DVD or mode) and iPod. It will be interpreted as a
Channel Down (preset channels only) if the second room source is in FM, AM, or XM.
· Volume Control
Volume control will be local to the FX85 module only. Default volume (TBD) will be set every time power is first supplied to the
system or during exit from stand by mode.
· ID-setting Operation
ID setting operation can be invoked by pressing fast-forward key in the main unit and three [3] key in the remocon. Once ID-
setting is triggered, the receiver must press its ID-setting button within 60 seconds. During this period, the transmitter will be in
open connect mechanism whereby any receiver can pair with the transmitter. After this period elapsed, the transmitter will revert
back to using close connect code whereby only those receivers which have the same ID as the transmitter will be able to link.
The user also has the option to exit the ID setting operation by pressing the same keys.
· iPod Detection and Charging
iPod is detected once inserted on the FX85 and battery charging automatically starts.
− − −
− The iPod Charging in Standby Mode:
lUpon iPod insertion detection and FX85 is in Power OFF (stand by), FX85 set will enter iPod charging Standby Mode.
lThe FX85’s CHARGE LED will light up whenever the iPod is charging.
lFX85 will charge the battery up to five hours. After this period, FX85 will not try to recharge the iPod.
lAfter battery full condition, even if the iPod is operated such as play, FX85 will not retry to recharge the iPod (timer will start
immediately once iPod is inserted).
lRe - charging of the battery in iPod Charging Standby Mode can be done only by removing and reinserting the iPod to the
dock.
− − −
− The iPod charging in Power On Mode:
lThe iPod automatically charges its battery whenever it is connected during Power ON.
lThe FX85’s CHARGE LED will light up whenever the iPod is charging.
lFX85 will continue charging the iPod as long as it is inserted (no charging time limit of five hours).
8.1.6. FX Configurations
There are four types of configurations for the FX series. This is explained by the following illustrations below:
Case 1: FX65/FX66
· This is the basic configuration of FX65/FX66 whereby it is only receiving wireless surround audio signal from the main set. This
uses a Type A transmitter which is only able to send audio in one direction. Audio is sent using streams AB through Ch 2.
16
SH-FX85P / SH-FX85PC

TX
A
1
FX65/FX66
RX
CH2/AB
Case 2 A: FX65/FX66 + FX85
· In this configuration, a second receiver, an FX85, in another room is listening to another audio source from the main set. The
FX85 also is able to send command to the main set such as Play, Stop, Skip, and Preset Tuner Channel Up/Down. This
configuration uses Type B transmitter which is an upgrade of the Type A and can be used on Type 1 (FX65/FX66). This
transmitter is able to send audio signal for second room via Ch 1 and first room via Ch 2.
In this configuration, streams AB is used to transmit the audio from main unit to the first room Type 1 receiver (FX65/FX66) via
Ch 2. While the second room audio is transmitted through stream CD via Ch 1.
Multi-room + Multi source
TX
RX
RX
FX65/FX66
FX85
CH1/CD
CH2/AB
B
1
1
Case 3 A: Wireless Subwoofer
· This configuration, Type A transmitter send signals to subwoofer and Type 1 receiver (FX65/FX66) via channel 2, which is the
same audio signals sent to FX65/FX66 as well. The subwoofer only decodes the low frequency signal.
17
SH-FX85P / SH-FX85PC

TX
RX
RX
CH2/AB
CH2/AB
A
1
1
Case 3 B: FX65/FX66 + FX85 + Wireless Subwoofer (for PTX7, PT1050)
· In this configuration, all audio source for the Type 1 subwoofer and Type 1 first room receiver (FX65/FX66) through streams AB
via Ch 2 and Type 2 second room receiver (FX85) comes from transmitter B through streams CD via Ch 1. For this
configuration, the user must perform ID setting for FX85 if it is sold as an accessory, but for bundled type, it already is paired
with the transmitter.
RX RX
RX
RX
CH2/AB
CH2/AB
CH1-CD
B
1
1
1
Multi-room + Multi source
18
SH-FX85P / SH-FX85PC

8.1.7. User Operation Flow
START
POWER ON MAINSET
Is Tx card
inserted?
Insert Tx card
Is there audio
source playing?
Play music
Is music heard on
wireless surround
speaker?
Is wireless link led
blinking?
Press FF Key in Mainset and 3 key
on remocon until "P" led displays
Press ID set button on receiver
Is wireless link led
blinking?
Is wireless
receiver on?
Power on receiver
Y
Y
DONE
YY
TX-RX probably not
paired. Do ID setting
process
Y
A
Repeat ID set
process
A
CHECK FOR SPEAKER
WIRE CONNECTIONS
N
N
N
N
8.1.8. Baseband Settings Update from EEPROM IC
· The software will read from an external EEPROM IC to get the selected baseband IC settings. Not all baseband register
settings (a total of 512 bytes) will be read from the EEPROM IC, though. Aside from getting the baseband settings from the
EEPROM IC, it is also used to enable FCC testing, select the application type and entering into doctor mode (this can be
enabled also by sending a command via the main unit).
8.1.9. Doctor Mode
· For normal operation but automatic frequency selection is disabled, it can enter into Doctor Mode. This feature is hidden from
normal user and will be used by the service center to fix to a particular RF Channel. With doctor mode, the user can disable
frequency automatic allocation and sniffer and be able to select a fix RF Channel (Channels 1, 2 or 3) by a combination or
remote control keys. Refer to Section 9.4 for Wireless Doctor Mode.
19
SH-FX85P / SH-FX85PC

9 Self-Diagnosis and Special Mode Setting
9.1. Wireless Service Mode Summary Table
The service modes can be activated by pressing various button combination on the player and remote control unit.
Below is the summary of major checking:
Player buttons Remote control unit buttons Application Note
FAST FORWARD 3 ID setting (Refer to the section
“9.2.1. ” for more
information).
SECOND SELECTOR
(press & hold)
Active transmitter display
STOP
(only in AUX)
4RF channel 1 display (Refer to the section
“9.2.2. ” for more
information).
5RF channel 2 display
6RF channel 3 display
7Auto RF channel display
Note: Main room refers to the location of the main unit.
20
SH-FX85P / SH-FX85PC