Panasonic KX-PW10CL2 User manual

Quick Reference Guide for
Number Display Service
KX-PW30CL2
KX-PW10CL2

Using a Number Display Service
This unit can work with NTT’s number display service. A contract with NTT (charge fee) and setting this unit are required.
Application for NTT contract
The line is constructed by NTT, and the service begins.
After 2-3 days (normally)
When you do not want to display your telephone number to the other party when calling, there are two methods available.
First choose the method and then you must apply to NTT.
1. Displaying for each call Up until now, the telephone number has been displayed to the other party.
To not display the telephone number, dial 184 before the other party’s
telephone number. The number will not be displayed for only that call.
2. Displaying for each line Up until now, the telephone number has not been displayed to the other party
for all calls. To display the telephone number, dial 186 before the other party’s
telephone number. The number will be displayed for only that call.
How the number is displayed
Set this unit to “ アリ ” (ON).
2

Number Display Service Functions
Setting up
1
1. Press (function).
2. Press .
3. Press (select) to select “ アリ ” (ON).
Searching for a phone number
2
くるくる電話帳
132
465
798
0
電話帳表示切換
電話帳表示切換
ストップ
くるくる電話帳
くるくる電話帳 くるくる電話帳
1. Press (received call memory).
3. When finished, press (stop).
2. Rotate  (search dial) to the right.
(Rotating to the right will change the display from
the latest call and to the left, from the oldest one.)
Note:
If you do not set the unit to “ アリ” (ON), the first
bell will ring shorter than usual, even if you receive
the service.
When you cancel the service, select “ ナシ” (OFF)
in step 3.
●
●
“ ” means new calls which have not been
checked.
Each time you press  (operation guide),
the display will change from the number to the
date and time.
Up to 14 digits can be displayed.
Note:
In step 1, if there are no calls in memory,
will be displayed.
When there are more than 30 calls in memory, they
will be erased from the oldest one, even if you have
not viewed them.
If the caller subscribes to a Dial-in Service,
- One of the numbers contacting the Dial-in Service
will be displayed.
OR
- When subscribing to a Dial-in Service using
several telephone lines in a company, the phone
number displayed depends on the line being used.
The date and time of the call will be stored using the
time programmed in the unit. Program the correct
time.
●
●


●
●
●
●
●
Using the Number Display Service, this unit can store
phone numbers and the date and time of the calls in
memory. [Up to 30 calls, except 99 calls, can be stored
in (search dial).] By using (search dial), you
can search for the phone number, and the date and
time of a call on the display of the unit.
[When you have not answered (a) call(s)]
機能
3
1 3
選択
登録
4. Press (record).
ストップ
5. Press (stop).
ストップ
着信メモリー
Subscribe to NTT, and then set the display to
“ アリ” (ON).
NO.テ ﾞ ィスフ°レイ=アリ 
チャクシンカ ﾞ アリマシタ
NO.テ ﾞ ィスフ°レイ=ナシ
機能
Changes each time you
press (function).
着信メモリー
チャクシンカ ﾞ アリマセン
132
465
798
0
ストップ
選択 機能登録

ON
OFF

3

Number Display Service Functions
3Sending a fax with 
(search dial)
Calling with (search dial) 4
2.
くるくる電話帳
くるくる電話帳 くるくる電話帳
Note:
You can also call using the following procedure.
1. Lift the handset, or press (speakerphone).
- Dial 184 or 186, if required.
2. Press (received call memory).
3. Rotate (search dial) until the number you
want to dial is displayed.
4. Press (start/copy) while a long beep is 
heard.
- If you dialed 184 or 186, press
(start/copy) when 3 beeps are heard.
●
Note:
If the line is busy, the unit will automatically redial
the number up to three times at one minute
intervals.
(Automatic Redialing)
If you want to dial 184 or 186 to send a fax, proceed
as follows.
1. Insert the document, and then lift the handset.
2. Dial 184 or 186.
3. Press (received call memory).
4. Rotate (search dial) until the number you
want to dial is displayed.
5. Press (start/copy) when 3 beeps are heard.
6. Press (start/copy) again.
●
●
1. Press (received call memory).
Rotate (search dial) until the number you
want to dial is displayed.
●Up to 14 digits can be displayed.
2. Insert the document (a beep will be heard), and
then select the resolution by pressing
(resolution).
●Insert the document FACE DOWN.
●Insert up to 5 sheets at a time.
3. Lift the handset, or press (speakerphone).
●You can also dial by pressing (start/copy).
(If a document is inserted, the unit will send a 
fax.)
5.Press (start/copy).
After the message is displayed, the unit will start to
send the fax.
4. Rotate (search dial) until the number you
want to dial is displayed.
4. Talk to the other party.
1. Open the document tray and adjust the guides.
3. Press (received call memory).
5. When finished, replace the handset, or press
(speakerphone).
スタート／コピー
スタート／コピー
スタート／コピー
スタート／コピー
スタート／コピー
スタート／コピー
スピーカーホン
スピーカーホン
スピーカーホン
Handset

スタート／コピー
スピーカーホン
画質
ｶﾞｼﾂ=ﾌﾂｳ
ｶﾞｼﾂ=ﾁｲｻｲ
ｶﾞｼﾂ=ｼｬｼﾝ
STANDARD
FINE
HALF TONE
くるくる電話帳
くるくる電話帳
くるくる電話帳
くるくる電話帳
着信メモリー
着信メモリー
着信メモリー
着信メモリー
着信メモリー

画質
スタート／コピー
Document Tray
Handset
Adjust the
guides.
くるくる電話帳
着信メモリー
4

Number Display Service Functions
Printing a caller list
5
5
ex. If you receive a Dial-in Service:
1. Press (received call memory).
2. Press (start/copy).
3. When finished, press (stop).
Note:
When there are more than 30 calls in memory,
the unit will erase calls from the oldest one.
If you press (stop) in step 3, all calls will be noted
as viewed ones, so “ ” will not appear on the display.
will also not be displayed.
●
●
ストップ
ストップ
スタート／コピー
132
465
798
0
ストップ
スタート／コピー
着信メモリー 着信メモリー
チャクシン ｶﾞ アリマシタ

1
2
3
No. 年 月 日  時分 相手局名 ダイヤルイン
1997.12.31
1997.12.30
1997.12.30
15：30
13：54
8：30
09876543・・
01234567・・
コウシュウテﾞンワ
4321(オヤキ)
4320(コキ1)
4321(オヤキ)
着信 リスト 1998.1.1 12：00
マーク：ミカクニンノチャクシンメモリー
■No., 年月日(year/month/day), 時分(hour/minute)
The unit prints the date and time of the received calls from the most recent call. (up to 30 calls)
■ダイヤルイン(Dial-in)
The unit prints 4 digits after the phone number which contacts the Dial-in Service, whether
it was a voice or a fax call, and if the call was received by the main unit or the handset.
●If you do not subscribe to a Dial-in Service, disregard this section.
■相手局名(caller's phone number)
The unit prints the phone number of the caller. If the caller’s name or phone number cannot be
displayed, a message will be printed out instead. “ ”means the call has not been checked.
Up to 20 digits, including “ ”, can be printed.

Number Display Service Functions
Erasing a phone number
6
1. Press (received call memory).
2. Rotate (search dial) until the number you want
to erase is displayed.
3. Press (erase).
4. Press (start/copy).
5. When finished, press (stop). 
Erasing all of the phone numbers
7
消去
くるくる電話帳
ストップ
スタート／コピー
132
465
798
0
ストップ
消去
くるくる電話帳
スタート／コピー
着信メモリー
132
465
798
0
消去
スタート／コピー
着信メモリー
着信メモリー
1. Press (received call memory).
3. Press (start/copy).
2. Press (erase).
消去
スタート／コピー
着信メモリー
You can erase phone numbers of the callers stored in the memory.
PFQX1239ZA