Panasonic KX-TG5632 User manual

PQQW15087XA DM1105SY2016
Setting up
For further information, visit http://www.panasonic.com/phonehelp
Base unit CHARGE 7 HOURS
Handset
Noise filter (For DSL Service users)
Hook
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
“Click”
B
A
Charger
Press plug
firmly.
“Click”
(120 V AC, 60 Hz)
OR
Charging
5
Use only the included Panasonic AC adaptor
PQLV1 or PQLV256.
Confirm CHARGE
indicator is on.
Confirm
“Charging” is
displayed.
KX-TG5632/KX-TG5633/KX-TG5634/KX-TG5652/
KX-TG5653
Model No. KX-TG5631/KX-TG5632
KX-TG5633/KX-TG5634
KX-TG5651/KX-TG5652
KX-TG5653
Quick Guide
TG563x_565x_QG(e).fm Page 1 Monday, January 23, 2006 5:35 PM
All manuals and user guides at all-guides.com
all-guides.com

–2 –
Operating tips
{ }: shows button names.
Using the navigator key
After pressing {MENU}or {Phonebook}, the
handset navigator key can be used. Press {^}, {V},
{<}, or {>}to navigate through menus and to select
items shown on the display.
Adjusting audio volume
Press {^} or {V} repeatedly while talking.
Handset soft keys
The handset features 2 soft keys. By pressing a soft
key, you can select the feature shown directly above
it on the display.
{ Select}, { Save}, { OK}and additional other
functions are assigned to soft keys. Pay attention to
soft keys to find functions you need during handset
operation.
Date and time (Handset)
1{MENU}i{4}
2Enter the current month, day, and year by selecting 2 digits for each.
3Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each.
4Press {AM/PM}to select “AM” or “PM”. i { Save}i { OFF}
Adding items to the phonebook (Handset)
1{Phonebook}i{Add}
2Enter the name (max. 16 characters). i{Next}
3Enter the phone number (max. 32 digits). i{Next}i { Save}i{OFF}
For further information, visit http://www.panasonic.com/phonehelp or refer to
Operating Instructions.
{V}
{^}
{<}{>}
Rcvd Phone
K calls book L
5
TG563x_565x_QG(e).fm Page 2 Monday, January 23, 2006 5:35 PM
All manuals and user guides at all-guides.com

–3 –
Basic operation (Handset)
Feature Operation
Adjusting the receiver/
speaker volume
Press {^} or {V} repeatedly while talking.
Viewing the caller list and
calling back
Press {^} or {V} repeatedly to select the desired item. i
{C}
Ringer volume 1{MENU}i{1}{1}
2Select the desired volume. i { Save}
Answering call-waiting
call (2nd call)
Press {CALL WAIT}when you hear call waiting tone.
Answering system (Base unit)
Feature Operation
Auto answer on/off {ANSWER ON}
Recording your greeting
message
(max. 2 minutes)
1{GREETING REC}
2Within 10 seconds, press {GREETING REC}again.
3Speak clearly about 20 cm (8 inches) away from the MIC.
4To stop recording, press {STOP}.
Listening to new
messages
When the MESSAGE indicator flashes on the base unit,
press {MESSAGE}.
Listening to old
messages
When the MESSAGE indicator does not flash on the base
unit, press {MESSAGE}.
Erasing a message Press {ERASE}during playback.
Using the answering
system remotely
1Dial your phone number from a touch tone phone.
2After the greeting message starts, enter your remote
code. (Default remote code is “11”.)
LThe unit plays back new messages.
LAfter playing back new messages, the voice guidance
starts.
3Follow the voice guidance as necessary.
For further information, visit http://www.panasonic.com/phonehelp
TG563x_565x_QG(e).fm Page 3 Monday, January 23, 2006 5:35 PM
All manuals and user guides at all-guides.com

–4 –
Quick troubleshooting
Place the handset on the base unit,
then check if CHARGE indicator is on.
CHARGE indicator is OFF. CHARGE indicator
is ON.
Unplug and then plug AC
adaptor properly to both
the base unit and AC
outlet.
Unplug the AC adaptor of the base unit and remove the
battery from the handset, then plug in the AC adaptor
and insert the battery into the handset again. Try re-
registration as explained later in this guide.
Lift the handset, then try again.
If handset still shows the same
message, try re-registration as
explained later in this guide.
CHARGE indicator
is still OFF.
Re-registration
failed.
Re-registration
failed.
CHARGE
indicator is ON,
now.
Your telephone may need service. For further troubleshooting,
please visit http://www.panasonic.com/phonehelp
“No link to base. Move closer to base, try again.”
1Handset shows:
OR
TG563x_565x_QG(e).fm Page 4 Monday, January 23, 2006 5:35 PM
All manuals and user guides at all-guides.com

–5 –
Quick troubleshooting
Lift up the handset from the base unit
or charger.
Press {C} (TALK) at the handset,
then check if the display shows
“Talk”.
Press {s} (SP-PHONE),
then check if the dial
tone is heard from the
speaker on the back.
No dial tone
Dial tone is heard.
{C}
{s}
“No link to base.
Move closer to
base, try again.”
is displayed.
“Talk” is
displayed.
Check the telephone
cord is properly
connected to both
the base unit and
telephone jack on
the wall.
Try remedy for 1
on previous page.
Your telephone may
need service when
only back speaker
provides a dial tone.
2No dial tone is heard from handset.
No link to base.
Move closer to
base, try again.
Talk
K (VE) Mute L
Your telephone may need service.
Please visit http://www.panasonic.com/phonehelp for further
troubleshooting.
Still no dial tone
TG563x_565x_QG(e).fm Page 5 Monday, January 23, 2006 5:35 PM
All manuals and user guides at all-guides.com