Panasonic T-Mobile KX-HDV130 Quick start guide

FIRMWARE UPGRADE PROCEDURE
TECHNCAL NOTIFICATION
V06.000 upgrade for KX-HDV130
06.12.2018

2
©Panasonic Co., Ltd.
Contents
Overview..................................................................................................................................................3
Upgrade Process......................................................................................................................................4
Device Display Sequence.........................................................................................................................5
First Time Update....................................................................................................................................5
Previously Updated.................................................................................................................................6
Manual Upgrade Overview.......................................................................................................................8
What you will need…...............................................................................................................................8
What is next….........................................................................................................................................8
Software Installation................................................................................................................................9
Setup Login Credentials........................................................................................................................10
Change Firewall Settings ......................................................................................................................11
Download Firmware ..............................................................................................................................12
Upgrade Firmware ................................................................................................................................13
Firmware Confirmation..........................................................................................................................14

3
©Panasonic Co., Ltd.
Overview
This document outlines the unique firmware upgrade procedure required for the listed model. Please follow
this procedure carefully to ensure successful firmware upgrade to the new version.
Panasonic SIP Model
KX-HDV130
This firmware upgrade package contains two FW files (part1 and part2)
Firmware Update Summary
1. Put both HDV130-06.000_US.fw.part1 and HDV130-06.000_US.fw.part2
in your FW maintenance server.
2. Set the FW File path “/HDV130-06.000_US.fw.part1“ in the device.
3. The device downloads HDV130-06.000_US.fw.part1 from the server and
FW updating is done by HDV130-06.000_US.fw.part1 first.
Then the device automatically downloads HDV130-06.000_US.fw.part2 and
FW updating is done by HDV130-06.000_US.fw.part2.
HDV130-06.000_US.fw.part1
Both files are required during the update procedure to properly
upgrade the device.
HDV130-06.000_US.fw.part2
NOTE
Once firmware is upgraded, you CANNOT
downgrade to Ver.1.04x or earlier.
Upgrade device to new firmware in a network
environment with no VLAN and no proxy
Do NOT rename these files!
Do NOT set “/HDV130-06.000_US.fw.part2” as FW file path
In the case of upgrade by TR069, "BOOT" and "Transfer Complete" will
be displayed with new version after the part2 upgrade is complete.

4
©Panasonic Co., Ltd.
Upgrade Process
This diagram illustrates the upgrade process. This process takes approximately 10-15 minutes to complete.
Please be careful not to disconnect power
and network during firmware update.
Upgrade Firmware via WebUI
At firmware version 1.04x or earlier, you can NOT use
macros: {MAC}, {mac}, {MODEL}, {fwver}
GET “HDV130-06.00_US.fw.part1”
GET “HDV130-06.00_US.fw.part2”
When update fails by disconnect power or network,
reconnect power and network. Then device starts
update again. Do not reset to factory default.
HDV130-06.000_US.fw.part1
HDV130-06.000_US.fw.part2
Reboot
Reboot

5
©Panasonic Co., Ltd.
Device Display Sequence
As the upgrade process advances, the device display will maintain the current upgrade status. This
display cycle is dependent upon whether the device is being upgraded for the first time, or the unit has
already received part of the upgrade.
First Time Update
If this is the first time to update the device with part1/part2 update, the device will display as follows:
<ERASING> 080%
<ERASING> 100%
<WRITING> 010%
<WRITING>
100%
<WRITING OK>
COMPLETED
<PART1 ERASING> 080%
<PART1 ERASING> 100%
<PART1 WRITING> 010%
<PART1 WRITING> 100%
<PART1 WRITING OK>
REBOOTING…
<Network Checking…>
<DOWNLOADING> 080%
<DOWNLOADING> 100%
<ERASING> 080%
<ERASING> 100%
<WRITING> 010%
<WRITING>
100%
<WRITING OK>
COMPLETED
STAND BY
STAND BY
Upgrade
Completed
Rebooting…
Rebooting…
Rebooting…
Rebooting…

6
©Panasonic Co., Ltd.
Previously Updated
If the device has been updated with part1/part2, the screen transitions will be as follows:
<WRITING
OK>
COMPLETE
D
<ERASING> 080%
<ERASING> 100%
<WRITING> 010%
<WRITING>
100%
<WRITING OK>
COMPLETED
<PART1 WRITING
OK>
REBOOTING
…
<Network
Checking…>
<ERASING>
080%
<ERASING>
100%
<WRITING>
010%
<WRITING>
100%
Rebooting…
Rebooting…
Rebooting…
Rebooting…
STAND BY
STAND BY
Upgrade
Completed

MANUAL FIRMWARE UPGRADE
FOR THE KX-HDV130
Preparation and Procedure

8
©Panasonic Co., Ltd.
Manual Upgrade Overview
This section covers upgrading device utilizing a server PC.
What you will need…
What is next…
Local Area Network (LAN)
Server PC connected to your LAN.
Personal Computer or
Laptop connected to your LAN.
Abyss Web Server Software
Download the software https://aprelium.com/
Install the Abyss Web Server on your local Server PC.
Panasonic KX-HDV130 Firmware Files
Download the firmware files to your web server PC.
https://panasonic.net/cns/pcc/support/sipphone/download/HDV1/us.html
Firmware File URL
Login to the KX-HDV130 WebUI with PC or Laptop.
Program the Firmware File URL under Maintenance tab.

9
©Panasonic Co., Ltd.
Software Installation
Run the Abyss Web Service installation file downloaded to the server PC from the website. Follow the
instructions for basic installation.
1
2
3
4
4
5

10
©Panasonic Co., Ltd.
Setup Login Credentials
Follow the instructions for language setup and the username and password.
Choose your preferred language.
Set your login credentials.
This will be the username and password
used when logging to the Abyss Web
Server.
When finished creating a
username and password,
Click OK.
The browser will launch an
authentication window.
Enter the username and
password from above.