Panasonic CT-27DC50 User manual

Panasonlc
Color Television/DVD Combo
Operating Instructions
CT-27DC50
For assistance, please call: 1-800-2tt-PANA (7262) or TQB2AA0339 00614
send e-mail to: [email protected] (USA only) PRINTED IN USA

INFORMA"I ION FOR YOUR SAFETY
Information For Your Safety
CAUTION:
DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER
USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION
EXPOSURE IF VIEWED DIRECTLY. BE SURE TO OPERATE THE PLAYER
CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR
EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO
LOOK INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
'CAUTION-LASERRADIATIONWHENOPEN.
DONOTSTAREINTOBEAM.
_TTENTION-RAYONNEMENTLASERENCASD'OUVERTURE
NEPASREGARDERDANSLEFAISCEAU,
_ORSICHT-LASERSTRAHLUNG,WENNABDEGKUNGGEOFFNET.
NICHTINDENSTRAHLBUCKEN
_DVARSEL-LASERSTR_INGVEDABNING
SEIKKEINOISTR/_EN.
ADVARSEL-LASERSTBALINGNARDEKSEL_PNES.
STIRRINKEINNISTRALEN.
VANNING-LASERSTRALNINGNARDENNADELAROPPNAD.
STIRRAEJINISTP_LEN
VAN0! -AMATTAESSAOLETALTTIINALASEBSATEILYLLE
ALATUIJOTASATEESEEN,
___ . C.C._R/,,_L,-_-_b_,To
(LABEL INSIDE OF TV)
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
WARNING: Toreducetheriskof eleclric shockdo notremovecoveror back.
Nouser-serviceablepartsinside. Referservicingtoqualifiedservicepersonnel.
The lightning flash with arrow
head within a tdangle is intended
to tell the user that parts inside
the product are arisk of electric
shock to persons.
The exclamation pointwithin a triangle
is intended to tell the user that
important operating and servicing
instructions are in the papers with the
appliance.
B

IABLE OF CONTENTS
Table of Contents (cont.)
TV Parental Guide Ratings Chart ........................................... 24
Blocking Message .................................................................. 25
Child Lock ............................................................................... 25
Remote Control Buttons - DVD Operation ...........26
DVD Quick Reference Functional Chart ................................... 26
Top Menu ................................................................................ 28
Menu ....................................................................................... 28
Angle ........................................................................................ 28
Subtitle .................................................................................... 29
Audio ........................................................................................ 30
Play Mode ................................................................................ 30
Marker ...................................................................................... 31
Repeat Mode ............................................................................ 33
A-B Repeat .............................................................................. 34
VSS .......................................................................................... 35
DVD Operation ........................................................ 36
DVD Setup Menus ................................................... 37
Disc Languages ........................................................................ 37
Ratings Level............................................................................ 38
Selecting Language of On-Screen display Menus ................... 39
On-Screen Messages ............................................................... 40
IV Aspect ................................................................................. 41
Digital Audio Output ................................................................. 41
Other Settings .......................................................................... 42
Still Mode .............................................................................. 42
Audio During Search ............................................................. 42
"IV Mode ................................................................................ 43
Dynamic Range Compression ............................................... 43
Still Picture Display ................................................................ 43
Black Level Control................................................................ 44
Language Code List .............................................. ,45
Troubleshooting Chart-TV ..................................... 46
Troubleshooting Chart-DVD .................................. 47
m
Read these instructions completely before operating TV.
Contents are subject to change without notice or obligation.
Copyright 2000 by MatsushitaElectric Corporation ofAmerica. All rights reserved.
Unauthorized copyingand distribution is a violation of law.

Congratulations
Your new TV/DVD combo features a solid state chassis that is designed to give you many years
of enjoyment. It was thoroughly tested and tuned at the factory for best performance.
Customer Record
The model and serial number of this product are located on the back of tile TV. You should note
the model and serial number in the space provided and retain as a permanent record of your
purchase. This witl aid in identification in the event of theft or loss, Product registration Is
available to U.S. customers at www.prodreg.com/panasonic.
Model
Number
Serial
Number
Care and Cleaning
Screen (Turn TV Off)
Use a mild soap solution or window cleaner with a soft clean cloth.
DO NOT USE ABRASIVE CLEANERS.
Avoid excessive moisture and wipe dry.
Cabinet and Remote Control
L"J Use a soft cloth dampened with water or a mild detergent solution.
Do not use benzene, thinner, or other petroleum based cleaners.
[7 Avoid excessive moisture and wipe dry.
Specifications
Power Source
CT-27DC50 (2.0A)
CT-20DC50 (1.7A)
...................,._....... ,[..__T;4 ,
3 Video Input Jacks
/ ToAudio AMP Jack
Digital Optical Output
120V AC;60Hz
1Vp-p, 75 Ohm, Phono JackType
0-2,0V RMS4.7K Ohm
Optical Connector
Specifications are subject to change without notice or obligation
[]

INS TA LLA TION
Installation
Television Location
This unit is intended to be used with an optional stand or entertainment center. Consult your
dealer for available options.
Avoid excessive sunlight or bright lights, including reflections.
Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure.
Fluorescent lighting may reduce remote control transmitting range.
Avoid magnetic equipment, including motors, fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
Use 75-ohm coaxial shielded cables.
Use appropriate input and output connectors that match your component connectors.
Avoid long cables to minimize interference.
AC Power Supply Cord
CALR'ION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUGTO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELS THAT ARE
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Cable /Antenna
Polarizedplug
Non-Polarizedplug
For proper reception, either a cable or antenna connection is required.
Incoming Cablefrom Cable Connection
Cable Company Connect the cable supplied by your local cable company.
75 OhmVHF/UHF
on backof TV
Note:A cable converter box may be required for proper reception. Check
with your/oce/cable company for compatibility requirements.
Antenna Connection
•For proper reception of VHF/UHF channels, an external antenna is
required. For best reception an outdoor antenna is recommended.
IncomingCable from
Home Antenna •Antenna Mode must be set to TV in the SETUP menu.
-- :_ Cable Preset
Cable Mode is preset at the factory.
Antenna users must change to Antenna
Mode in the Setup Menu.
ml

Remote Control Operation
Remote Control
POWER
VOL
navigate in menus: • ,
TVNIDEO
DVDMocle_ ; :: ':'"' ::;
MUTE
to'_ccess_a'r_d,can_CC) :_:_
"0"~ "9"
Press nur_e_'pa_d_; _
SKIP/REW, PLAY,SKIP/FF,
CANCEL/TVNCR, STOP,
STILL/PAUSE, REC,
VCR/DBS CHANNEL SLOW/
SEARCH
LIGHT*
TV, DVD, CBL/DBS, VCR
operation." :- ':. '
CH
ACTION/ENTER
R-TUNE
RECALUDISPLAY
EUR511503
"To prolong the life of the batteries,
turn the light off and on pressing
R-TUNE and RECALL buttons,
simultaneously.
[]

REMOTE CONTROL OPERATION
Quick Reference Functional Key Chart
POWER All Components Turns On and Off selected components
MUTE "IV
[-'-'-] Mutes TV audio
W/VIDEO TV Selects the input mode
ACTION Activates TV menus/Enter
Activates DVDAction/Selection
ENTER Activates DBS menus
Channel up/down, Menu navigation
Channel upldown
Channel upldown, Navigation up/down
1
_TV
DVD
j DBS
i
iTV
i
CABLE CH
iOBS
CH
VCR
All Components
i i P"ql r"__i
VOL,4 |,VOL
TV
Cable
VCR
DBS
*DVD
TV
VCR
CABLE
All Components
DVD
Navigation upldown
Channel upldown
Search code
TV Volume left/right, Menu navigation
Navigation left/right
Selects channel
Selects code
Note: Refer tothe DVD sectionin this manual
for DVD buttons operation.
*Press IV mode button to adjust volume for DVD.
im

REMOTE CONTROL OPERATION
Quick Reference Functional Key Chart cont.
RETURNS10
[]
NUM
[]
DVD
DBS
DVD
Return=>10
Guide
Press to Access 0-9 Number buttons
while in DVD mode
DBS Exit
R_UNE TV Previous channel
CABLE
]DBS
TV
Ca_e
RECALL
DISPLAY
VCR
DVD
DBS
TV
CABLE
DBS
VCR
DVD
VCR
DVD
PLAY
F-;-1
Display Channel, time and audio
On screen display
On screen display
Display
Program Info
TV mode selection for remote control
DBS/Cable mode selection for remote control
VCR mode selection for remote control
Digital Videodisc mode selection for
remote control
Play
Play
El

Quick Reference Functional Key Chart (cont.)
SKIP/FF
SKIP/REW
STOP
REC
®
CANCEL
TVNCR
r-]
STILL
PAUSE
rrl
SLOW
SEARCH
VCR
OVD
VCR
DVD
I VCR
DVD
VCR
VCR
OVID
VCR
DVD
VCR
DBS
DVD
Fast forward
Skip search fast forward
Rewind
Skip search rewind
Stop
Stop
Record
Select TVNCR mode
Cancel
Pause
Still
Channel upldown
Page Up/Down
Channel up button (search forward))
Channel down button (search backward)
After pressing PAUSE key, press m buttonfor
Slow Forward and ==button for Slow
Backward. You can press these buttons five
(5) times to speed up the Slow Search in
either direction.
Battery Installation
Use two AA batteries:
Remove battery cover by pushing in and up near arrow.
install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Precautions
Replace batteries in pairs.
Do not mix battery types (zinc carbon with alkaline).
Do not recharge, heat, short-circuit, disassemble, or bum batteries.
Note: Incorrect installation can cause battery leakage and corrosion that will damage the
Remote Control.
i¢1

REMOTE CONTROL OPERATION
Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers'
components, using the component function buttons for CABLE, DBS, VCR, or DVD. Follow the
procedures for programming your Remote Control with or without codes for the component.
Determine the manufacturer of the component and look in the table for the code.
With A Code
Confirm that the extemal component is plugged in and on.
Turn the component off.
Press the ACTION and POWER button, together, for at least 5 seconds.
Press appropriate component button on the Remote Control (VCR, DBS/CBL, or DVD).
Enter the 3-digit component code using the Remote Control numeric keypad (0 ~
9 buttons).
Press the Remote Control POWER button to test the component. If the procedure was
successful, the component will turn on.
Helpful Hints: Unsuccessful Code
If the component does not operate with the
Remote Control, repeat the procedure using
another code, (Some brandshave multiple codes.)
If an incorrect code isentered, or if the procedure
takes onger than 30 seconds,the programm'ng!
willfail.
Without A Code
This procedure searches all codes and is called the "sequence method".
Confirm that the external component is plugged in and on.
Turn the component off.
Press the ACTION and POWER button, together, for at least 5 seconds,
Press appropriate component button on the Remote Control.
Press the [.] button to move forward to the next code. Press the [*] button to move
backward.
Press the Remote Control POWER button to test the component. If the procedure was
successful, the component will turn on.
Note: Repeat the above steps until the component code is found. It may take many
attempts before the correct code is found.
After the code is found, press the ACTION button to store the code.
CABLE BOX VCR DBS
El

/'_PIWU/P" _,(JPI!I'(UL UHI-HA HUN
Component Codes
The Universal Remote Control is capable of operating many component brands after entering code.
Some components may not operate because the codes are not available due to limited memory.
The Universal Remote Control does not control all features in all models.
Codes for VCR
m
Admiral
Aiwa
_kai
&udio Dynamic
Bell& Howell
Broksonic
Canon
CCE
Citizen
Craig
CurtisMathes
Daewoo
DBX
Dimensia
Emerson
Fisher
Funai
GE
Go V',:leo
Goldstar
Gradiente
Hitachi
InstantReplay
Jensen
JVC
Kenwood
LG
LX_
Magnavox
Marantz
Marta
Memorax
MGA
Minolta
Mitsubishi
Multitech
NEC
Olympic
Optimus
135
127,132
129,114,115,116
139,111
105,113
120,126
123,125
143
106
105,129,106
145,124,127
_43,124,175
)139, 110, 111
145
;143,126,119,103,125,120
i105,108,109,107,113
120, 126.127. 134
124,133,145
137,151,163
106
1134,156,168,170
100,123,127,145,168
123,124
139
110,111,134,139
106,110,111,134,139
106
I100,105,106,107,108,109,
127
123,124,131
110,111,139
106
109,124
138,140,14!,147,148,161
100,145
138, 140, 141,147, 148,161
137
110,111,134,139
123,124
106, 121,128,135
Orion
Panasonic
Penney
Pentax
Philco
Philips
Pioneer
Proscan
Quasar
RadioShack
RCA
Realistic
'samsung
Sansui
sanyo
Scott
Sears
Sharp
Shintom
Signature2000
Singer
Sony
sv20d0
Sylvania
Symphonic
Tashiro
Tetung
Teac
Technics
Teknika
Toshiba
Vector Research
Wards
Yamaha
Eenith
120,126
121,122,123,124
100,105,110,111,124,139,
145,
100,111,145
120,123,124,126,127,143
123,124,131,173
123
100,101,102,123,124,131,
!133, 145, 146,174
121,122,123,124
105,109,124,127,133,136,
140
100, 101,102,123, 124, 131,
133,145,146,170,172,174,
176
105, 109, 124, 127, 136, 140
102,104,133,137
120,126,139.152
105,109,113
102, 104,109, 120,126, 138,
140,147,148
100,105,106,107,108
135,136,137
117
127,135
117
128, 129,130
127
1123,124,127,131,178
127,168,177
106
110, 111,139
110,111,127,139
1121,122,123,124
124,127
101,146,166
111
106,109,135,136
105,110,111,139
106,169

REMOTE CONTROL OPERATION
Codes for Cable Box
ABC 224
Archer 225, 232
Cableview 205, 232
Citizen 205, 222
Curtis 212, 213
Diamond 224, 225, 232
Eagle 229
Eastern 234
GCbrand 205, 232
Gemini 222
General
Instrument/ 211,219, 220, 221,222, 224,
Jerrold 225, 226, 227
Hamlin 212, 218, 240, 241,242, 245
P
Hitachi 203, 224
Macom 203, 204, 205
Memorex 230
Movietime 205, 232
Oak 202, 237, 239
Panasonic 209, 210, 214
Phitips 206, 207,?..28,229, 230
Pioneer 201,216
Pulsar 205, 232
Dish Network
(Echostar) t05
Echostar 105
G,E. 106
Gradiente 114
Hitachi 103, 111,112
HNS (Hughes) 103
Puser
RCA
Realistic
Regal
Regency
Rembrandt
Samsung
Scientific
Atlanta
Stmark
Sprucer
;Stargate
Telecaption
Teleview
Texscan
Tocom
Unika
Universal
Videoway
Viewstar
Zenith
Zenith/.Drake
Satellite
232
215
232
212. 218, 240, 241,242, 245,
249
234
205, 232, 237
2O5
211,212,213
201,205
205, 210
205, 210
248
201,205
244
235, 236, 247
225, 232
222, 232
206
229, 230
200, 227
200
Codes for DBS
Panasonic
Philips
Primestar
RCA
Sony
Toss-up
Uniden
104
101,102
108
106, 109, 110, 113
107
100
101,102
m

UI" IIUNAL I_QUIPMENT _ONNECTIONS
Optional Equipment Connections
VCR Connection
VCRs, video disc players, video game equipment, and DSS equipment can also be connected
to the video inputs. See the optional equipment manual for details.
TERMINALS ON BACK OF TV VCR
headphoneplug TERMINALS ON FRONTOF TV
Procedure
1. Connect equipment as shown to front or rear Audio/Video input jacks.
Note: Video 2 Front and Rear Audio/Video connectors cannot be operated at the
same time.
2. Select the Video mode by pressing TMNIDEO button.
3. Operate optional equipment as instructed in equipment manual.
TO AUDIO AMPLIFIER
Connect to an external audio amplifier input for listening to a stereo system.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select IV SPEAKERS ON from AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust TV volume to desired level.
4. Adjust amplifier volume to match the TV.
5. Select TV SPEAKERS OFF&VAO from AUDIO menu.
6. Volume, mute, bass, treble and balance are now controlled from the TV.
Note: In OFF&FAO the volume is controlled by the external ampfifier.
Adjusting volume while in DVD mode
PressTV buttonon theremote control. PressVOL left/righttoadjustthe volume.After
adjusting volume, press DVD button to return to DVD mode.
El

Dolby Digital Decoder Connection OPTIONAL EQUIPMENT CONNECTIONS
When DVDs are recorded in Dolby* Digital or DTS, follow this diagram to connect the
TV/DVD unit to a Dolby Digital decoder.
Note:
•Remove the dust protection cap from the optical digital audio output connection.
•For protecting against dust, reattaeh the dust protection cap when not using the connector.
ON BACK OF "I'V/DVDSET
I DIGITAL,NJDIOOLrr I
ICPTtCAL
-b
Dust protection cap _ _ _ +
i_To optical digitalaudio input connector
Decoder withDolby Digital /
DTS processing
AV Amplifier with 5.1ch
input connector
Center speaker
Leftfrontspeaker
Subwoofer
Leftsurroundspeaker
Rightfrontspeaker
Rightsurroundspeaker
*Manufactured underlicensefrom DolbyLaboratories."Dolby" and the double-D symbolare trademarksof
Dolby Laboratodes.Confidential unpublishedworks. ©1992-1997 Dolby Laboratories, Inc. All dghts
reserved. la

IVIAIN I¥1PNU
Main Menu Main Menu
I mrllB
ACTION Button
Press the ACTION button to display the Main Menu and submenus. Press the ACTION button
repeatedly to exit.
CH /VOL Buttons
Press the CH (channel) or VOL (volume) buttons to select an icon. Use the CH buttons to
highlight the desired features. Use VOL buttons to select and adjust features.
Remote Action /Navigation Buttons
CH
VOL(_ VOL
CH
Front Control Panel Buttons
@
®
®
®
®
®
@
®
®
@
@
POWER -Press to turn ON or OFF.
VOLUME -Press to adjust sound and navigate in menus.
CHANNEL -Press to select next or previous channel and navigate in menus.
ACTION - Press to access menus.
TVNIDEO - Press to select ]V or Video modes.
SKIP/SEARCH (Reverse) - Press during play to return to previous chapter or track.
PLAY - Press to play disc.
SKIP/SEARCH (Forward) - Press during play to select next chapter or track.
STOP - Press dudng play to stop disc.
PAUSE - Press during play to pause disc,
OPENICLOSE - Press to open or close the disc tray.
El

MAIN MENU FEATURE CHART
Main Menu Feature Chart
SETUP
Whenentered,TIME willdisplay on screen after
SET TIME pressing POWER button, RECALLbutton, or
changingchannels.
Choose CABLEor TVtomatch the signalat your
ANT antennainput.
AUTO PROG Automaticallyprogramchannelswitha signal
; intomemory.
MANUAL PROG Manuallyadd ordelete channelsfrom memory.
AUTO POWER ON SelectSET to powerup theTV at the same timeas
theCable Boxorothercomponentsor selectOFF.
SelectC1 or C2for Closed Captioning display.Select
CC MODE OFF todisplayclosedcaptioning when MUTE button
is pressed.
AUTO ASPECT SelectON toautomaticallyset aspectratio4:3 or
16:9.Thisfeature worksonly in DVD mode.
LANGUAGES Select English,Spanish, or Frenchmenu.
AUDIO
AUDIO NORM
BASS
TREBLE
BALANCE
MODE
AI SOUND
SURROUND
TV SPEAKERS
Reset BASS,TREBLE and BALANCE tofactory
default.
Increaseor decrease thebassresponse.
Increaseor decreasethetrebleresponse.
Emphasizetheleft]rightspeakervolume.
Selecttheaudiomode:
[] STEREO - Twochannelaudioreception.
[3 SAP- (SecondAudioProgram)Tune tothe
alternateaudiochannelifavailableinyourarea
(bilingualor descriptiveaudio).
[] MONO- One channelaudio. Use whenstereo
signalisweak.
Automaticallymaintainconstantvolumebetween
programsand commercials.
Enhancesaudioresponsewhenlisteningto stereo.
Select"iV SPEAKERS:
[3 ON - TV SPEAKERSoperatenormally.
[] OFF&VAO(VariableAudio Output) - "IV
Speakersoff-- audioadjustableby TV.
{3 OFF&FAO(FixedAudioOutput)-"IV
SPEAKERSoff-- audioadjustableonlybythe
externalamplifier.
la

IVlP411V I¥1C.[V_J I--r',_ IUI_ _I'_K IMain Menu Feature Chart (Cont.)
TIMER
SLEEP TIMER
PROGRAM TIMER
DVD SETUP
PICTURE NORM
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
I I IIII
CHANNEL CAPTION
III
GAMEGUARD
Program TV to automaticallyturnoff in30, 60, or
90 minutes. Select NO to turntimer off.
ProgramTV to automatically turn on and off at
selected time on a selected channel, daily or only one
day.
DVD SETUP
Accessed only in DVD Modewith Disc in STOP
mode. Refer to the DVD section for information on
DVD setup menus.
IIIII
PICTURE
Resetall picture adjustmentsto factory default
settings.
Adjust desiredcolorintensity.
Adjust naturalfleshtones.
Adjust dark areasfor crispdetail,
Adjust whiteareas ofpicture.
Adjustclarityofoutlinedetail.
CHCAP
Providelabels for up"io30 stationsusing upio four
charactersfor each station.
LOCK
Programto prevent videogames, cable box, and
VCRs from being viewed.
Note: For information about Motion Picture and
TV Parental Guide ratings, refer to the
V-Chip section in this manual
El

Special Features
Languages
In SETUP menu, select ENGLISH, ESPANOL, or FRAN_AIS to change the menu language
SET-UP
SET TIME : AM
ANT CABLE
AUTO PROG NO
MANUAL PRQG NO
AUTO POWER ON OFF
_ MODE OFF
AUTO ASPECT ON
EN GL.ISHI_ESPA_OI _ F_R:ANOA!S
Timer
Sleep Timer
InTIMER menu, program to turn TV OFF in 30, 60, or 90 minutes. Select NO to turn offtimer
TIMER CONTROL
PROGRAM TIMER
ON
OFF
CHANNEL 3
SET TIME FIRST
Program Timer
In Timer menu, program TV to automatically turn on and off at selected time on a selected
channel, daily or one day.
TIMER CONTROL
SLEEP TIMER NO
PROGRAM TIMER
_oN,
OFF
CHANNEL 3
SET TIME FIRST
Note: TIME must be entered in the SETUP menu to operate PROGRAM TIMER.

i lmer tcont.)
I
\1/ Turn Off After 90 Minutes
The TV automatically turns OF_F after 90 minutes when
turned on by the PROGRAM TIMER. If the OFF time is
programmed or if akey is pressed, the automatic OFF
after 90 minutes will be cancelled
\ 'l /PROGRAM TIMER Activation
The PROGRAM TIMER is active when the TV is OFF or
ON, The TV will switch to the selected channel at the
selected time set by the PROGRAM TIMER
CH CAP (Channel Caption)
Program channel captions (station labels) for 30 stations using up to four characters, Use the
numeric keypad for entering numbers unavailable with the select arrows.
CHANNEL CAPTION
:2
ENTER CAPTION
_k TO MOVE '_" TO SELECT
!I' CURSOR CHANNEL
Note: Delete channel captions by entering dashes (-) in all four character slots.
D

LOCK
Game Guard Lock and Unlock
Select GAME GUARD to prevent video games and videotapes from being viewed.
Lock Channel 3, Channel 4, and video inputs for !2, 24, or 48 hours by entering a four-digit
secret code, then selecting GAME GUARD ON.
Note: Understand bow to unlock GAME GUARD before using _t Use a code that is easy to
remember or record it in a safe place.
Unlock GAME GUARD by reentering your four-digit secret code, then selecting GAME GUARD
OFF
Note:
LOCK
GAME GUARD OFF
MOTION PIC'E STATUS OFF
CHANGE SETTINGS •
TV PARENTALSTATUS OFF
CHANGE SETTINGS •
HOW LONG? 12 HRS
CHILD LOCK OFF
If GAME GUARD is ON, and if a blocked channel or video input is selected, the
message GAME GUARD ON displays in the upper right comer of the TV screen.
\I/ Unlocking
If you do not remember your code, the LOCK will
unlock in 12, 24, or 48 hours depending on the
current setup. Be cautious when selecting
ALWAYS. If ALWAYS is selected, and you forget
your secret code, the TV must be serviced by a
qualified technician in order to clear the
LOCK setup.
[]