Panasonic MC-CG522RC79-DE User manual

© 2012 Panasonic Manufacturing Malaysia Berhad
(6100-K). Unauthorized copying and distribution is a
violation of law.
PMMA120510CE
Vacuum Cleaner
Model No. MC-CG522RC79-DE
MC-CG522RA76-CH
MC-CG522RP47-GB
MC-CG522RG43-AU
MC-CG522RG43-NZ
DESTINATION: UK, NEW ZEALAND, AUSTRLIA, CON-
TINENTAL AND SWITZERLAND
TABLE OF CONTENTS PAGE PAGE
1 Specifications ----------------------------------------------------- 2
2 Schematic Diagram---------------------------------------------- 2
3 Wiring Connection ----------------------------------------------- 3
4 Trouble Shooting Chart ---------------------------------------- 4
5 Disassembly and Assembly Instruction------------------ 6
5.1. Disassembly of Upper and Lower Body ------------- 6
5.2. Disassembly of Motor Case Set ----------------------- 7
5.3. Disassembly of Cord Reel Unit ------------------------ 8
5.4. Disassembly of Rail Base Unit------------------------- 9
5.5. Disassembly of Fan Motor Unit ------------------------ 9
6 Exploded View and Replacement Parts List -----------11
6.1. Exploded View --------------------------------------------11
6.2. Attachment Exploded View ----------------------------12
6.3. Packing Instruction---------------------------------------13
6.4. Replacement Parts List ---------------------------------14

2
1 Specifications
2 Schematic Diagram
Model MC-CG522RC79-DE, MC-CG522RA76-CH, MC-CG522RP47-GB, MC-CG522RG43-AU,
MC-CG522RG43-NZ
Power Source 230V~240V~50Hz
Input Power (Max) 1300W
Input Power (IEC) 1200-1250W
Power Control SLIDE
Dust Capacity 3.0L
Automatic Cord Rewind 0
Vac Gauge 0
Exhaust Filter ELECTROSTATIC
Extension Wands METAL TELESCOPIC WAND
Blower Operation 0
Floor Nozzle 2-STEP
Dust Bag PAPER BAG
Dimension (H x W x L) mm 240mm X 304mm X 450mm
Net Weight 4.5 KG
Cord Length 7.0 M
Cleaning Tools CREVICE TOOL / DUSTING BRUSH

3
3 Wiring Connection

4
4 Trouble Shooting Chart

5

6
5 Disassembly and Assembly Instruction
5.1. Disassembly of Upper and
Lower Body
Step 1 Open Dust Cover & remove Dust Bag.
Step 2 Release Dust Cover from Hanger.
Step 3 Remove 2 screws from the Front Side of the body..
Step 4 Release 2 catches using philip screwdriver.
Step 5 Remove Body Cover.
Step 6 Take out the filter.
Step 7 Release 4 catches using philip screwdriver to take out
the Cord Rewind Pedal and Switch Pedal.

7
Step 8 Remove 4 screws from back side of body.
Step 9 Lift up Upper Body.
Step 10 Remove Upper Body from Lower Body.
5.2. Disassembly of Motor Case Set
Step 1 Remove the On/Off swich.
Step 2 Remove Volume Ass’y.
Step 3 Take out the Motor Case Set.

8
5.3. Disassembly of Cord Reel Unit
Step 1 Pull up the Cord Reel Unit.
Step 2 Release 2 connector wires at the Rail Base Unit.
Step 3 Release Printed Circuit Board (P.C.B) from catches.
Step 4 Release the Fuse.

9
5.4. Disassembly of Rail Base Unit
Step 1 Insert a slotted screwdriver into the shaft of the Cord
Reel Unit and turning it 90anti-clockwise.
Step 2 Remove the Cord Reel Unit from the Rail Base Unit.
To assemble:
Step 1 Assemble in reverse order of the disassembly.
Step 2 Pretension the Cord Reel Unit.
-Turn the Cord Reel Unit holding on the plug
-Number of turns for pretension of the Cord is engraved on the
steel at the side of Cord Reel Unit.
5.5. Disassembly of Fan
Motor Unit
Step 1 Lift up Fan Motor Unit from the lower body.
Step 2 Take out the Silicon Cloth.

10
Step 3 Disconnect 2 Wire Terminals.
Step 4 Remove Motor Support Rubber and Motor Support
Rubbers.