Panasonic Omnivision PV-4611 User manual

Thank you for choosing
Panasonic \ x n . c i
Omni vision IVH3
MODEL PV-4611
Video Cassette Recorder
Operating
Instructions
rsad tfiyse instructtorvs canctulty betara attfimptlnfl to mrwuM^
operate or adjust this proOoCJ ftutf Mvw tfiits mHiiudl
Spat list i Qutok Use ■ Guide iz trtduded. Caul a para r.^rtfl ennsiHlta an
e s patio I f:f T .td Inelurin.
VOTSMWK (A).
PS
-PB
■
PI
0—
P12
■
P13
~
PI
5
■
PI6
^
P£3
■
P24
-
Back
Cover
Connections
H
Getting
Started
I
Basic
Operation
H
More
You
Can
Do
I
Other
Inlormation

Things You Should Know
Congratulations
on your purchase of one of the most sophisticated and
reliable products on the market today. Used properly,
we’re sure it will bring you and your family years of
enjoyment. Please take time to fill in the information at
right. The serial number is on the tag located on the
back of your VCR. You'll want to keep this manual
handy as your convenient VCR information source.
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
This video recorder, equipped with the HQ (High Quality) System, is compatible with existing VHS
equipment.
Only use those tapes with the (VtiSl mark. It is recommended that only cassette tapes that have
been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used.
f Date of Purchase '
Dealer Purchased From_
Dealer Address_
Dealer Phone No_
Model No_ PV-4611 _
^Serial No. __ _j
FCC Warning: Any unauthorized changes or modifications to this equipment would void the user's authority to operate.
A This symbol warns the user that uninsulated voltage within
the unit may have sufficient magnitude to cause electric
/ *l\ shock. Therefore, it is dangerous to make any kind of
/ f \ contact with any inside part of this unit.
A This symbol alerts the user that important literature
concerning the operation and maintenance of this unit has
been included. Therefore, it should be read carefully in order
to avoid any problems.
Table of Contents
Important Safeguards and Precautions.3
Unpacking Your VCR and Features.4
VCR and Cassette Information (Record Tab, Tape Speeds, Tape Cleaning, Specifications). 5
Connections
Basic Connection (Antenna and VCR, VCR and TV). 6 , 7
Additional Connections (CATV, Audio/Video) . . . 8 , 9
Getting Started
One Time VCR Setup (On-screen Language, Channel Memory, Clock Set). 10, 11
On Screen Displays (OSD) (Function, Channel, Menu, VCR Status & Clock, Warning, Instruction). 12
Basic Operation
Playback a Tape (Main Operation, Special Effects, Quality Picture Features). 13
Tape Operation (Repeat Play, One Minute Skip, Zero Search, Auto Functions)... 14
Record On a Tape (Main Operation, One Touch Record, Channel Selection, Rapid Tune). 15
More You Can Do
Timer Recording (Main Operation, Cancel-Clear or Replace, Program Contents). 16, 17
Timer Recording Using VCR Buttons.17
Copying Your Tapes (Dubbing) (Connection, Main Operation, Monitoring, Select Input Mode). 18
Special VCR Features (VCR Lock, Warning Beeper). 1 9
VCR PIUS+ Set Up (Cable Box Set Up, VCR Plus+ Channel Set Up). 2 0 , 21
VCR Plus+ Programming (Main Operation, Make Corrections). 22
Multi-Brand Control Feature.23
Other Information
Before Requesting Service (Self-check items). 2 4
Spanish Quick Use Guide/Gula para rapida consulta.25, 26
Index of Controls (Remote Control, vcr ). 2 7 , Back Cover
r
A
CAUTION
A
CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TQOUALIF1E0 SERVICE PERSONNEL
2

Important Safeguards and Precautions
| INTRODUCTION
OUTSIDE ANTENNA, EQUIPMENT, AND POWERLINE EXPOSURE
Careful attention has been given to this Video product to assure
a quality standard devoted to your safety and enjoyment. This
quality standard together with your personal responsibility for
the safety of yourself and others, will contribute to your
enjoyment. This Video product uses electrical energy and
requires proper handling at all times.
I CAUTION I
READ AND RETAIN THE SAFETY AND OPERATING INSTRUCTIONS
To make full use of the safeguards incorporated in this unit, read
and follow this basic guide, adopted in part from Underwriter's
Laboratories Standard 1409, Second Edition, before operating
this Video product.
FOLLOW THE INSTRUCTIONS AND BE SURE TO HEED ALL
WARNINGS on unit and in the manual, for easy maintenance,
proper and trouble free operation of this Video product.
| INSTALLATION
1.
A
2 .
A
3.
A
4.
A
5.
A
6 .
A
OPERATE FROM A POWER SOURCE INDICATED on this
Video product, or in this Manual. Your Electric Utility Service
Company or Video Products Dealer will be happy to verify
the power source in your home.
THE GROUNDED OR POLARIZED PLUG IS A SAFETY FEATURE
This Video product may be equipped with either a polarized
2-wire AC line plug or a 3- wire grounding type plug. The two
wire polarized plug (having one blade wider than the other)
will fit into the power outlet only one way. If it is a three wire
grounding type plug (having a third pin), it will fit into a
grounding type outlet.
DO NOT DEFEAT THE SAFETY PURPOSE OF THE GROUNDED
OR POLARIZED PLUG by tampering with It. If the plug does
not fit fully into the socket, try reversing it. If you should still
be unable to fully insert the plug into the socket, you may
find that a proper outlet is needed to meet today's Electrical
Standards. An electrician will replace your outlet safely.
POWER SUPPLY CORDS SHOULD BE PROTECTED and
routed so that they are not likely to have anything rest on
them, roll over them, or be subject to walking traffic or
abuse: particularly at plug-ins, convenience receptacles, or
cord exit points from the unit. Where an extension is
needed, use a grounded or polarized cord.
HAZARDOUS FRAYED CORDS OR DAMAGED PLUGS
SHOULD BE REPLACED BY A QUALIFIED SERVICE
TECHNICIAN.
OVERLOADED WALL OUTLETS AND EXTENSION
CORDS PRESENT DANGEROUS RISKS OF FIRE OR
ELECTRICAL SHOCK.
AVOID BLOCKING VENTILATION HOLES
Your video unit has ventilation openings in its cabinet to
release heat generated during operation. Blocking these
opening can cause heat build-up inside the unit, causing
failure that may result in a fire hazard or heat damage to
cassettes. For protection:
a. Never cover the bottom ventilation slots or the unit with
soft material, or operate the unit placed on a bed, sofa,
rug, or soft accessory.
b. Avoid built-in installations, such as a bookcase or rack,
unless proper ventilation is provided.
AVOID EXTREMELY HOT LOCATIONS OR SUDDEN
CHANGES IN TEMPERATURE such as placing the unit
near or over a radiator, in direct sunlight, closed vehicles, or
transporting it suddenly between areas
of extreme temperature variation.
If the unit is suddenly moved from a cold
place to a warm place, moisture may
form on the tape and inside the unit.
TO AVOID INJURY TO A CHILD. ADULT;
OR COSTLY DAMAGE:
a. Do not place unsecured equipment on a sloping surface
or any heavy object or unit.
(Use the unit in a horizontal position and do not place
anything heavy on it.)
b. Support for the unit should be adequately firm, level, and
strong. Replace any unstable cart, table or support. An
appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
c. Carefully follow all operating instructions and use the
manufacturer's recommended accessories when
operating this unit or connecting it to any other equipment.
NEC ■ NATIONAL
ELECTRICAL CODE
MfTBJHA
U—-LEAD IN
WIRE
1-
A
Eucmc / 1 5
L^hSnt—
GROWN
GROUNDING
CONDUCTORS
<HECUCT)ON*1*.M)
A
INSURE SAFE ANTENNA
AND CABLE CONNECTIONS
If an outside antenna or cable
system is connected to the
antenna equipment, be sure the
_ „ _. r discharge unit antenna or cable system is
f === =====‘f grounded so as to provide
some protection against built
up static charges and voltage
- ground clamps surges. Part 1 of the Canadian
—power service Electrical Code, in USA
electrode system Section 810 of the National
(necaatislparthj Electrical Code, ANSI/NFPA
70, provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes and
requirements for the grounding electrode.
2. ELIMINATE ANTENNA PROXIMITY TO HIGH VOLTAGE POWER
» SOURCES, OR CHANCE OF ACCIDENTAL CONTACT BY INSTALLER
/T\ An outside antenna system should be located where it will never be
reached by power lines, electric light or power circuits and where it
will never contact these power sources if it falls. Installer should use
extreme care to avoid possible fatal contact by touching power lines,
circuits or other power sources when installing an outside antenna.
lUSE I
AFTER STORING OR WHEN MOVING THE UNIT, REFER TO THE
INSTALLATION SECTION OF THE SAFEGUARDS.
1. DO NOT USE THIS VIDEO UNIT NEAR WATER: around bathtubs,
sinks, laundry, wet basement, swimming pool or any water source.
USE ACCESSORIES RECOMMENDED ONLY BY THE
MANUFACTURER to avoid risk of fire, shock or other hazards.
UNPLUG ALL EQUIPMENT EXPOSED TO RAIN, MOISTURE, OR
A STRONG IMPACT AND GET A QUALIFIED INSPECTION
If your unit has been exposed to rain, water, excessive moisture, or
subjected to strong impact, unplug it and have it inspected by a
service technician before use.
4. UNPLUG UNUSED UNIT, AND ALL EQUIPMENT DURING A STORM
A During a lightning storm, when indoors or outdoors, or before
leaving unit unused for extended periods of time, disconnect all
equipment from power source, antenna and cable system.
5. UNPLUG ALL EQUIPMENT BEFORE CLEANING. After unit has
A been unplugged use a dry, clean, chemically untreated doth. Use
no cleaning fluids, aerosols, or forced air that could over-spray, or
soak into the unit, and cause electrical shock. Any substance such
as wax, adhesive tape, etc. may affect the cabinet surface.
Exposure to greasy, humid, or dusty areas may affect internal parts.
WHEN PLUGGED-IN: KEEP WATER AWAY; NO FINGERS
a INSIDE NOR ANY OBJECTS INSIDE; AND NO MAGNETS OR
ZlA ELECTRICAL INTERFERENCE NEARBY.
a. Never operate the unit if liquid has been spilled into it.
Immediately unplug the unit, and have it inspected by a service
technician. Fire and shock hazards can result from electrical
shorts caused by liquid contact inside,
b. Caution the children about dropping or pushing objects into the
unit. Some parts inside carry hazardous voltages and contact can
cause electric shock. Objects dropped in electrical equipment can
cause fire hazards.
c. Separate the unit from any interference causing appliances.
Pladng the unit directly above or below your TV set may cause
electrical interference. Keep all magnets away from electronic
equipment.
2.
A
3.
6 .
SERVICE
1. DO NOT ATTEMPT TO SERVICE THIS PRODUCT YOURSELF. If
this Video product does not operate as described, when the detailed
Operating instructions are followed, do not attempt to open or
remove covers, or make any adjustments not described in the
manual. Attempting to service this unit yourself may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified
sprvrrA nfir^nnnftl
2. CHECK ON REPLACEMENT PARTS REQUIRED. Be sure the
service technician has used replacement parts specified by the
manufacturer or having the same characteristics as the original
part. Unauthorized substitutes may result in fire, electric shock or
other hazards.
3. HAVE TECHNICIAN PERFORM SAFETY CHECK described in
A the manufacture’s service literature, after any service or repairs, to
determine that the Video unit is in safe operating order.
A
A
3

Unpacking Your VCR and Features
Unpacking Your VCR
The accessories shown below are provided to help
you use or set up your VCR.
Optional accessories are also listed.
Accessories
^j
Remote Control
VSQS1416
feL_ )
)
2 “AA"
Batteries
Cable
VJAS0183
Optional Accessories
• 1/2” Video Cassette Tape
Load the batteries in the Remote Control
y Lift off the lid after
J_ pressing in and up on
the latch with your thumb
nail or other narrow object.
Install two batteries
as indicated inside the
Battery Compartment.
Fit the lid's hinge piece
into the indent on the
case, and snap lid into place.
Battery replacement caution
• Do not mix old and new batteries. (Also, never mix
alkaline with manganese batteries.)
Product. Features^ _
All Channel Auto Set/181 -CH TV/CATV Tuner. 10
Auto Daylight Saving Time.5
Auto Operation Functions (Auto Playback, Rewind, Tape Eject, Power off). 14
Auto Repeat Function.14
Digital Auto Picture.13
Easy-to-Read English/Spanish/French On Screen Displays.10, 11, 16, 17
Multi Brand TV/Cable Box Remote Control.23
One Minute Skip.14
One Month, 8 Program Timer Recording.16, 17
One Touch Recording (OTR).15
Program Director Remote Control.16, 17
Quick Play Mechanism.24
Rapid Tune.15
Special Effects Playback.13
Special VCR Features (VCR Lock, Warning Beeper)...19
VCR P!us+ Recording.20, 21,22
Zero Search.14
4

VCR and Cassette Information
Erase Protection (Record Tab)
Cassettes have a record tab to ensure that
recordings are not accidentally erased.
To prevent accidental
erasure, break off the tab
with a screwdriver. L.
To record again, cover the
hole with cellophane tape.
Maximum Record/Playback Time
Only use tapes with the ms mark in this unit.
Tape Speed
Position
Type of Video Cassette
T60 T120
T160
SP
(Standard Play)
1 Hour
2 Hours
2 Hours
40 Minutes
LP
(Long Play)
2 Hours 4 Hours
5 Hours
20 Minutes
SLP
(Super Long Play)
3 Hours
6 Hours
8 Hours
Reset all VCR Memory Functions
This operation is convenient when moving the VCR to a new
location, or if a mistake was made in the One Time VCR
Setup section. Make sure a tape is not inserted in the VCR.
1) Turn VCR Power on.
2) Press and hold both Play and Rewind buttons on the
VCR for more than 5 seconds.
• The power will shut off.
3} Perform the One Time VCR Setup section on page 10.
[ D.S.T. (Daylight Saving Time)
Spring:
First Sunday in April (DAYLIGHT SAVING T!ME:AUTO)
Automatically adds one hour and adjusts the clock.
NORMAL TIME
1:00 a.m.
2:00 a.m.
DAYLIGHT
SAVING TIME
3:00 a.m. 4:00
—— ►
a.m.
Autumn:
Last Sunday in October (DAYLIGHT SAVING TIME:
AUTO) Automatically turns back one hour and adjusts
the clock.
DAYLIGHT
SAVING TIME
1:00 a.m.
2:00 a.m.
NORMAL TIME
> .
1:00 a.m. 2:00 a.m.
*
Cleaning Care for Video Heads
or
Clogged Video
Head Picture
Clogged Video Heads
While your VCR will not normally require head cleaning,
however the heads may become clogged when playing
an old or damaged tape. If the image on your screen
resembles the illustration on the left or the screen
becomes solid blue when playing back a pre-recorded
signal on the tape, the heads probably require cleaning.
Cleaning the Heads
It is recommended that head cleaning be performed by
a qualified service technician. Please contact your
nearest Panasonic Service Center. An alternate
solution is to obtain a head cleaning cassette. Be sure
to follow the cleaning instructions carefully. Excessive
use of a cleaning cassette could shorten head life.
Use this cassette only when symptoms occur.
Blue Back
(During playback of
pre-recorded tape)
Blue Back
Screen
Product Specifications
Power Source: 120V AC, 60 Hz
Power Consumption: Approx. 18 watts (Power on)
Approx. 6 watts (Power off)
Video Signal: E1A Standard NTSC color
Video Recording System: 4 rotary heads helical
scanning system
1 track (Normal)
Audio Track:
Tuner:
Broadcast Channels
CATV Channels:
VHF2-13, UHF 14-69
Midband A through i (14-22)
Superband J through W
(23-36)
Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)
Special CATV channel 5A (01)
Ultraband 65-94,100-125
Operating Temperature: 41°F~104°F (5°C~40°C)
Operating Humidity: 10%-75%
7.9 lbs. (3.6 Kg)
14-3/16" (W)X 3-1/2” (H)X
11-1/4" (D)
360 (W) X 89 (H) X 285 (D) mm
Designs and specifications are subject to change
without notice.
Weight:
Dimensions:
Note:
5

Basic Connection
Disconnect the antenna or cable
from your TV and connect it to the
VCR (IN FROM ANT.) \
CD
VCR
Antenna Cable
Set the Output Channel
of your VCR
to channel 3 or 4 (whichever is not being
transmitted on by a Local TV broadcast).
RF Coaxial Cable
(VCR-TV Connection Cable) (supplied)
Connect the VCR to your TV
with the RF Coaxial Cable (OUT TO TV).
6

Between Antenna and VCR
Case 1: Twin Lead Cable Only
To VCR Terminal
(Flat) Twin Lead 300 300-75 ohm Transformer
Ohm Cable (not supplied)
Case 2: Twin Lead & Coaxial Cables
Between VCR and TV
Case 1: Screw & Plug Type Terminal
UHF/VHF Band Separator
(not supplied)
—oBsu iy ] ])
RF Coaxial Cable
Case 2: Screw Type Terminal
75-300 ohm Transformer
(not supplied)
UHF/VHF
Band Mixer
(not supplied)
Case 3: Double Screw Type Terminal
(Round) 75 Ohm
coaxial Cable
To VCR Terminal
Case 3: Two Twin Lead Cables
UHF/VHF Band Separator
(not supplied)
300-75 ohm Transformer
(not supplied)
UHF/VHF
Band Mixer
(not supplied)
To VCR Terminal
If your TV has both post and screw-type VHF
terminals, using the post connection is
recommended to minimize signal loss.
Case 4: Complex TV Terminal
TERMINALS ON BACK OF TV SET
Split out
$$ i
ANT2
• Connect to one of the ANT terminals and select
the same antenna number on the TV.
7
Connections

Additional Connections
All connections on this page are made with 75 Ohm coaxial cables.
t Without a Converter/Descrambler Box j
You can:
1) Use your VCR Remote Control to select channels.
2) Program one or more unscrambled channels for
unattended recording.
NOTE: You cannot record or view scrambled
channels with this connection.
IN from
CABLE
IN FROM ANT.
OUT TO TV
VHF/UHF
With a (CABLE to VCR) Converter/Descrambler Box
You can:
1) Record and view any channel including
scrambled channels; channel selection
must be made at the Cable TV Converter
Box.
2) Program one channel for unattended
recording.
Cable TV Converter
Bo:
IN fron
CAE
OUT TO TV
VHF/UHF
With a (VCR to TV) Converter/Descrambler Box
You can:
1) Use your VCR Remote Control to select channels.
2) Program unattended recordings of more than
one unscrambled channel.
NOTE: You cannot record scrambled channels with
this connection.
IN from
CABLE
Cable TV
Converter
Box
IN FROM ANT.
OUT TO
TV
VHF/UHF
With Two Converter/Descrambler Boxes
If you want to record and view
a combination of scrambled
and unscrambled channels,
you will need additional
equipment.
This connection requires “HiljjjlrT^
two converter boxes,
an A/B switch, and
a 2-way splitter
as shown here.
VHF/UHF
IN from -cT"
CABLE fg:
\ 2-Way ,//
JN VSplitter 0UT1
Converter Box 1
.OUT 2
Converter
Box 2
75ohm
Coaxial Cable.
IN FROM ANT.
OUT TO TV
A/B Switch
8

■ With a DSS Receiver -
You can:
1) Record and view any channel including
scrambled channels; channel selection
must be made at the DSS Receiver.
2) Program one channel for unattended
recording.
NOTE: The DSS receiver must be turned
off to view programs from a cable
box or antenna. See the DSS
manual for details.
IN FROM
CABLE or
Antenna
IN FROM
Satellite Dish
OUT TO TV
DSS
Receiver-
VHF/UHF
‘DSS® is a registered trademark of DIRECTV, INC., a unit of GM Hughed Electronics.
Audio/Video Connections
If your TV has AUDIO IN and VIDEO IN terminals, you can connect your VCR to them to receive a higher quality
picture and sound. The antenna-VCR and VCR-TV connection is as shown.
I Audio/Video Connections -
VIDEO OUT
IN FROM ANT
OUT TO TV
VHF/UHF
VIDEO IN
1 Connect the VIDEO OUT terminal on the VCR to the VIDEO IN terminal of your TV.
2 Connect the AUDIO OUT terminals on the VCR to the AUDIO IN terminals of your TV.
3 Set the VIDEO/TV selector of your TV (Monitor/Receiver) to “VIDEO.”
NOTE: To use your TV as a VCR monitor, set the VIDEO/TV selector on the TV {Monitor/Receiver) to “VIDEO.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC in USA (and to the
Canadian Electrical code in Canada) that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
9
Connections

One Time VCR Setu
When the VCR power is first turned on,
the language select and channel auto set
screen appear automatically followed by
a prompt to set the clock.
l\X check list before you begin.
D All TV and VCR connections are made.
(See pages 6~9.)
POWER
To Set Language, Channels, and Clock
.__ VCR
/-/"! \ jjawm
Turn TV on and VCR on -
Turn TV on and VCR on.
TV is set to VCR channel (the Same one you set
on the back of the VCR CH3 or CH4.) (See page 6.)
vcR i Push VCR CH A for
jO|a English on-screen
|V|i i displays. i j displays.
or
VCR/TV VCR CH
Up/Down
77"‘"1 Push VCR CH ▼ for
| Spanish on-screen
| displays.
dr
- Push VCR/TV for
vcmv • prenQh on-screen
Vj displays.
SELECT LANGUAGE
PUSH VCR CH A: ENGLISH
PULSE VCR CH T: ESPANOL
APP. VCR/TV : FRANQAIS
If you set the wrong
language,
see the “Reset all VCR
Memory Functions"
section on page 5.
• You can also set by
using the same
buttons on the VCR.
REWe FT©
OCr'M SWr ’“SI"
O © © (©)
cSl+yfa
“g o
Make sure the VCR is connected
to an antenna or cable.
If you use a cable box, the cable box
must be left on for auto channel set.
vrR 1 Push VCR CH A to
0 * • start Channel Auto j
| c h | S i • The following on-screen <
The following on-screen displays appear in sequence:
“CH AUTO SET COMPLETED"
“PLEASE SET CLOCK BY PUSHING MENU KEY”
/7?Y-
Push MENU to display
(gp: CD 1
the SET CLOCK screen.
-<D
MENU ,
1 - j
• Make entries within 5
♦
minutes, or the VCR exits
©
the Set Clock screen.
Using the Select/Set Wheel _
There are basically two types of Wheel operation.
• Selecting items from an on-screen display.
* Entering information, such as setting the clock.
Rotate and push
the WHEEL to
select and set the
MONTH.
Rotate and push the Remaining items
! WHEEL to set remaining ! o be set:
* items at right. ! Year
Rotate
(up or down)
ROTATE TO SELECT
OPERATION
le fa \
jwn) \£) (like
Push
(like a button)
ftOTATH TO SELECT
• The day of the week
automatically appears.
• See page 5 for more on D.S.T.
Push MENU twice
to start the clock
and exit this mode.
Date
Year
Time
D.S.T.
(Daylight Saving Time)
2/ 2/1996 FRI 1:30PM
to make selection to enter selection
TO CORRECT
PUSH WHEEL OR CLEAR KEY
TO START PUSH MENU KEY