Panasonic Omnivision PV-7200 User manual

Thank you for choosing
Panasonic
Omnivisionú
^
MODEL
PV-7200/PV-7400/PV-7450
Video Cassette Recorder
Operating
Instructions
Please read these instructions carefully before añempting to
connect, operate Of adjus! Ms product Save this manua
spanish Quick Use Guide is included. (Guia para rápida
consulta en español está includo.)
Quick Use Guide is on the back cover.
VOTSa0a7 (A)
eee
Suoi]2ouuo:)
uone1iado jiseg
UOHJEUWUOJUY 4BULO
C)
o
poe
=r
=
ta
un
—
a
—
Lal
[n
a
og UE) NOA a0;
6d ~ 9d
bld ~ Okd
6ld ~ Sid
92d ~ Ocd
kr
PJ
m
i
UJ
2
Oo
=
©
o
<
(D
-

Things You Should Know
C
ongratulations
Date
of
Purchase
:
on your purchase of one of the most sophisticated and Dealer Purchased From
reliable
products
on
the
market
today.
Used
properly,
Dealer
Address
it
will
bring
you
and
your
family
years
of
enjoyment.
Dealer
Phone
No.
Please fill in the information at right. The serial number Model N
is on the tag located on the back of your VCR. ste n O.
erial No.
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
This video recorder, equipped with the HQ (High Quality) System, is compatible with existing VHS equipment.
Only use those tapes with the mark. It is recommended that only cassette tapes that have been tested
and inspected for use in 2, 4, 6, and 8 hour VCR machines be used.
FCC Warning: Any unauthorized changes or modifications to this equipment would void the user's authority to operate.
This symbol warns the user that uninsulated voltage within the unit may
AN AN have sufficient magnitude to cause electric shock. Therefore, it is
—— dangerous to make any kind of contact with any inside part of this unit.
CAUTION: TO REDUCE THE RrSK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK) This symbol alerts the user that important literature concerning the
A e an operation and maintenance of this unit has been included. Therefore, it
should be read carefully in order to avoid any problems.
Table of Contents
Things You Should ROW a 2
Important Safeguards and Precautions ......cccnooouccccncnnooncncnnncnnrnonarnononnonanannncranncannccnnnonannnnaronnnn 3
Unpacking Your VCR + Product Features .................. eese esee eene nennen entren nnn ranis 4
VCR and Cassette Information (Record Tab, D.S.T., Head Cleaning, Tape Speeds, Specifications) ..... 5
Connections
Basic Connection (Antenna and VCR, VCR and TV) .nooccccccconononconnncnncanaconcnnoconnnananancnnano nen nitent nnn 6, 7
Additional Connections (CATV, Audio/Video) ...............eeesceseeeseee nennen neat nennt annes anna is 8, 9
Getting Started
Location of Controls (Remote Control, VOR) ............ eene enne nnne nein enaane teen tesis nnns 10, 11
One Time VCR Setup (On-Screen Language, Channel Memory, Clock Set) .......csccsssessseeeseeseeees 12, 13
On-Screen Displays (OSD) (Function, Channel, Menu, VCR Status & Clock, Warning) ..................... 14
Basic Operation
Playback a Tape (Main Operation, Special Effects, Quality Picture Features) ....oooccnncconccoonanonocanancnonos 15
Record On a Tape (Main Operation, One Touch Record, Channel Selection) ............sessceeceeceeeeseeneeees 16
Copying Your Tapes (Dubbing) (Connection, Main Operation, Monitoring, Select Input Mode) .......... 17
Timer Recording (Main Operation, Cancel, Clear or Replace Program Contents) ......................... 18, 19
More You Can Do
Tape Operation (Repeat Play, One Minute Skip, Zero Search, Auto Functions, Index Search) ........ 20, 21
MTS Broadcast/ VHS Hi-Fi Stereo System (For Model PV-7450 only)
(Stereo/SAP/Mono Broadcast, Select Audio Mode) ......tonconicnconnccccuncconcnanrononaninonnocanacannnronaronnnrooannannonas 22, 23
Multi-Brand Control Feature s... oreet cree teo te tana a ais 24, 25
Special VCR Features (VCR Lock, Warning Beeper} .............. «eese eene ener nacen nennen nens 26
Other Information
Before Requesting Service (Self-check items) ..........:::cccccsessssnccecceeseeeceeeeecsensuseesessceuaeeneetecseneass 27
Service Cemer LIST do 28
WAU AI cso recs MET ————Á——— mies aadeneaes 29
Spanish Quick Use Ud ces ek Cd teet cae EA ea Goa deco at 30, 31
QUICK Use Gdida DC Back Cover
NO

Ay Important Safeguards and Precautions
FOR YOUR SAFETY, READ AND RETAIN ALL
SAFETY AND OPERATING INSTRUCTIONS.
HEED ALL WARNINGS IN THE MANUAL AND
ON THE UNIT
INSTALLATION
1 POWER SOURCE CAUTION
Operate only from a power source indicated on the
unit or in this manual.
If necessary, have your Electric Utility Service Company
or Video Products Dealer verify the power source in your .
home.
2 POLARIZED OR GROUNDING PLUG
As a safety feature, this Video product comes with either
a polarized power cord plug (one blade is wider than the
other), or a three-wire grounding type plug.
AR PLUG CAUTION:
This plug will only fit into an outlet one way. If you cannot
fully insert the plug, try reversing it. If it still will not fit, have
an electrician install the proper wall outlet. Do not defeat the
safety feature by tampering with the plug.
GROUNDING PLUG CAUTION:
This plug will only fit into a three-hole grounding outlet. If
necessary, have an electrician install the proper outlet. Do
not defeat the safety feature by tampering with the plug.
3 POWER CORD
Make sure power cords are routed so that they are not
likely to have anything rest on them, roll over them, or be
in the way of walking traffic.
If an extension cord is used, make sure it also has either
a polarized or grounded plug and that the cords can be
securely connected.
Frayed cords, damaged plugs, and damaged or cracked
wire insulation are hazardous and should be replaced by
a qualified service technician.
Overloaded outlets and extension cords are fire hazards
and should be avoided.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat
generated during operation. If they are blocked, heat
build-up inside the unit can cause failures that may result
in a fire hazard or heat damage to cassettes.
For protection, follow these rules: -
a. Never cover ventilation slots or the unit while in use,
or operate the unit when placed on a bed, sofa, rug, or
other soft surface,
b. Avoid built-in installation, such as a book case or rack,
unless proper ventilation is provided.
5 AVOID EXTREMELY HOT LOCATIONS OR
SUDDEN TEMPERATURE CHANGES
Do not place the unit over or near any kind of heater or .
regulator, in direct sunlight, inside a closed vehicle, etc..
Do not move the unit suddenly between areas of
extreme temperature variation. If the unit is suddenly
moved from a cold place to a warm place, moisture
may condense in the unit and on the tape.
6 TO AVOID PERSONAL INJURY
* Do not place unsecured equipment on a sloping
surface.
* Support for the unit should be firm,
level, and adequately strong.
* An appliance and cart combination
should be moved with care.
Quick stops, excessive force,
and uneven surfaces may cause
the appliance and cart combination
to overturn.
+ Carefuily follow all operating instructions and use
the manufacturer's recommended accessories
when operating this unit or connecting it to any
other equipment,
OUTDOOR ANTENNA INSTALLATION
1 SAFE ANTENNA AND CABLE CONNECTION
If an outside antenna or cable
system is connected to the
equipment, be sure the antenna
or cable system is grounded so
as to provide some protection
against built up static charges
and voltage surges. Section
810 of the National Electrical
Code, ANSI/NFPA 70 (in Canada,
part 1 of the Canadian Electrical
Code) provides information with
respect to proper grounding of the
mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes
and requirements for the grounding electrode.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE
POWER LINES OR CIRCUITS
An outside antenna system should be located well away from power lines,
electric light or power circuits and where it will never come into contact with
these power sources if it should happen to fall. When installing an outside
antenna, extreme care should be taken to avoid touching power lines,
circuits or other power sources as this could be fatal. Because of the
hazards involved, antenna installation should be left to a professional.
USING THE VIDEO UNIT
if the unit has been in storage or moved to a new location, refer first
to the INSTALLATION section of these safeguards.
1 KEEP THIS VIDEO UNIT AWAY FROM WATER OR
MOISTURE OF ANY KIND.
2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
STRONG IMPACT, unplug the unit and have it inspected by a qualified
service technician before use.
3 DURING AN ELECTRICAL STORM
During a lightning storm, whether indoors or outdoors, or before leaving the
unit unused for extended periods of time, disconnect all equipment from the
power source as well as the antenna and cable system.
4 WHEN THE UNIT IS PLUGGED IN
* Never expose the unit to rain or water. DO NOT OPERATE if liquid has
been spilled into the unit. Immediately unplug the unit, and have it
inspected by a service technician. Fire and shock hazards can result from
electrical shorts caused by liquid contact inside.
* Never drop or push any object through openings in the unit. Some internal
parts carry hazardous voltages and contact can cause electric shock or fire
hazard.
* Avoid placing the unit directly above or below your TV set as this may
cause electrical interference. Keep all magnets away from electronic
equipment.
5 USING ACCESSORIES
Use only accessories recommended by the manufacturer to avoid risk of fire,
shock, or other hazards.
6 CLEANING THE UNIT
Unplug the unit, Then, use a clean, dry, chemically untreated cloth to gently
remove dust or debris. DO NOT USE cleaning fluids, aerosols, or forced air
that could over-spray, or seep into the unit and cause electrical shock.
Any substance such as wax, adhesive tape, etc, may mar the cabinet surface.
Exposure to greasy, humid, or dusty areas may adversely affect interna! parts.
SERVICE
1 DO NOT SERVICE THIS PRODUCT YOURSELF
If, after carefully following the detailed operating instructions, this Video
product does not operate properly, do not attempt to open or remove covers,
or make any adjustments not described in the manual. Unplug the unit and
contact a qualified service technician.
2 IF REPLACEMENT PARTS ARE REQUIRED
Make sure the service technician uses only parts specified by the manufacturer,
or those having the same safety characteristics as the original parts. The use of
unauthorized substitutes may result in fire, electric shock, or other hazards.
3 HAVE THE SERVICE TECHNICIAN PERFORM
A SAFETY CHECK
After any service or repairs to the unit, request the service technician to
conduct a thorough safety check as described in the manufacture’s service
literature to insure that the video unit is in safe operating condition.
NEC - NATIONAL
ELECTRICAL CODE
ANTENNA
DISCHARGE UNIT
(MEC SECTION 610-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21}
5672-5 GROUND CLAMPS
4——-POWER SERVICE
GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

Unpacking Your VCR + Product Features
Unpacking Your VCR Loading the Batteries
The accessories below are provided to help
you use or set up your VCR.
Push in and up on
I the latch with your
: thumb nail and lift off
Accessories the lid.
Remote Control
9 Install two batteries
VSQS1488
(PV-7200/PV-7400)
as
indicated
inside
the
VSQS1480
(PV-7450)
dl
2
"AA
Fit
the
lid’s
hinge
Batteries
3
piece
into
the
indent
on the case, and snap
the lid into place.
RF Coaxial
Cable
VJAS0183
Battery
replacement
caution
* Do not mix old and new batteries.
Model PV-7450 remote * Do not mix alkaline with manganese batteries.
is shown here.
To order accessories,
call toll free 1-800-332-5368
Product Features
All Channel Auto Set/ 181-CH TV/CATV Tuner ................... cessere nnne nennen nennen 12
Auto Daylight Saving: TIMO «uere eite ae De o a ebd a pM ese eet AEE EALER 5
Auto Features för a Quality PICU: ;..oeure caer ides core ru rea eu e o ouem E ye eerie e sene ra Eat ek PA 15
Auto Operation Functions (Auto Playback, Rewind, Tape Eject, Power off) ........ccccccccnncnacnonccananannnons 20
Auto Repeat PUlCUOR des qose quiz ida sis 20
Digital Auto Picture (For Models PV-7400 and PV-7450 only) ............... seen 15
Easy-to-Read English/Spanish/French On-Screen Displays ............................... 12, 13, 18, 19
MTS Broadcast System (For Model PV-7450 only) (Multi-channel Television Sound-Stereo, SAP, Mono).. 22
Multi Brand TV/Cable Box Remote Control .............ccccccccccnnccnccnconccnnonenocarononcnnncnnorinconenoss 24, 25
One: MINUIS SKID: ineo eta con 20
One Month, 8 Program Timer Recording ..................... esee enne nnn rnt 18, 19
One: Touch Hecording (O TB). oet it etes e his io né edet ees 16
Program Director Remote Control ................. essent eene nennt n ner nennen 18, 19
Special Effects Playback saos eec cu Set a AiO PARS NUS INS 15
‘Timer: Recording Using VOR Buttons viii e taches err o recorre estote Egan een epis 19
VHS Hi-Fi Stereo System (For Model PV-7450 only) .......ococcccccannononnonacnonanacicnnonnonanannanconanncaroos 23
VHS Index Search System (Direct Access Search, Index Scan Search) ......... D 21
Zero Search cuan ied educ Pe mid sss tuU se un i der bcn eto Cove Ida a vereE 20

—
IB A ^
Erase Protection (Record Tab) Maximum Record/Playback Time
Cassettes have a record tab to ensure that Only use tapes with the VHS mark in this unit.
recordings are not accidentally erased.
Tape Speed
i Setting
To prevent accidental
erasure, break off the tab
with a screwdriver.
To record again, cover the Ga" 4 Hours
hole with cellophane tape.
SLP 3H
(Super Long Play) ours
D.S.T. (Daylight Saving Time) Reset all VCR Memory Functions
2) Push and hold both PLAY and CH A buttons on the VCR
for more than 5 seconds.
E * The power will shut off.
DAYLIGHT : : ;
i ———————B
SAVING TIME sonam 4:00 E 3) Perform the One Time VCR Setup section on page 12.
Autumn (Last Sunday in October)
When the VCR is set to DST:ON, it automatically turns
back one hour and adjusts the clock.
DAYLIGHT 1:00 a.m. 2:00 a.m. Hem .
cs Specifications
Power Source: 120V AC, 60 Hz
Spring
(First
Sunday
in
April)
Use
when
moving
the
VCR
to
a
new
location,
or
if
a
mistake
When
the
VCR is
set
to
DST:ON,
it
automatically
adds
was
made in the
One
Time
VCR Setup
section.
one
hour
and
adjusts
the
clock.
*
Make
sure a
tape
is not
inserted
in
the
VCR.
NORMAL
TIME
|--99,8-m-
2:00
a.m.
1)
Turn
VCR
Power
on.
Power Consumption: Power On
Approx. 18 watts (PV-7200/PV-7400)
Approx. 23 watts (PV-7450)
Power Off
Approx. 6 watts (PV-7200/PV-7400)
Approx. 7 watts (PV-7450)
Video Signal: EIA Standard NTSC color
Video Recording System: 2 rotary heads helical scanning
system (PV-7200)
4 totary heads helical scanning
A
1:00 a.m. 2:00 a.m.
Head Cleaning
Your VCR will not normally require head cleaning, system (PV-7400/PV-7450)
however the heads may become clogged when playing Audio Track: 1 track (Normal)
an old or damaged tape. 2 channels (Hi-Fi Audio Sound)
PV-7450
Head
Clog
Sensor
Tuner
E
If head cleaning becomes Broadcast Channels: VHF 2-13, UHF 14-69
necessary, the VCA will VIDEO HEADS MAY CATV Channels: Midband A through I (14~22)
display the screen at right Ardea ap EAD Superband J through W (23~36)
while playing back a CLEANING CASSETTE Hyperband AA-EEE (37-64)
recorded signal. AAA: PO; MANIN: Lowband A-5~A-1 (95~99)
To exit this screen, push PLAY Special CATV channel 5A (01)
on the remote control or VCR. Ultraband 65~94, 100~125
END:PLAY KEY
- Use "dry" type head cleaning cassette" only. Operating Temperature: 41°F ~104°F (5°C~40°C)
* Be sure to follow the cleaning tape instructions Operating Humidity: — 10%~75%
carefully. Excessive use of a cleaning cassette can Weight: 7.5 lbs. (3.4 kg) ,
shorten head life. Dimensions: 14-1 5/16 (W) x 3-2/3 (H) X
* If using a head cleaning cassette does not solve the 11-13/16" (D)
problem, contact your nearest Factory Service Center 380 (W) x 93 (H) x 300 (D) mm
or authorized Service Center. (See page 28.)
* Cleaning cassette part No. NV-TCL30PT is Note: Designs and specifications are subject to change
recommended. without notice.
c

Basic Connection
ANTENNA
INDOOR —— OUTDOOR —— Cable TV
ANTENNA ANTENNA
i xd p>
Disconnect the antenna or cable
from your TV and connect it to the
VCR (IN FROM ANT.)
VCR
Antenna Cable
VW,
€ G
Set the Output Channel
of your VCR
to channel 3 or 4 (whichever is not being
transmitted on by a Local TV broadcast).
RF Coaxial Cable
(VCR-TV Connection Cable) (supplied)
Connect the VCR to your TV
with the RF Coaxial Cable (OUT TO TV).
WARNING
When using “Nut type” RF coaxial cables, tightein with fingers only. Overtighteining may damage terminals.

Between Antenna and VCR
Case 1: Twin Lead Cable Only
nese a
(Flat) Twin Lead 300
Ohm Cable
To VCR Terminal
300-75 ohm Transformer
(not supplied)
Case 2: Twin Lead & Coaxial Cables
UHF/VHF
Band Mixer
(not supplied)
(Round) 75 Ohm
coaxial Cabte To VCR Terminal
Case 3: Two Twin Lead Cables
Fl
TERO
)
UHF/VHF
Š Band Mixer
300-75 ohm Transformer
(not supplied)
To VCR Terminal
* If your TV has both post and plug-type VHF
terminals, the post connection is recommended
to minimize signal loss.
(not supplied)
Between VCR and TV
Case 1: Screw & Plug Type Terminal
UHF/VHF Band Separator
(not supplied)
RF Coaxial Cable
Case 2: Screw Type Terminal
75-300 ohm Transformer
(not supplied)
Case 3: Double Screw Type Terminal
UHF/VHF Band Separator TV
(not supplied) VHE
Case 4: Complex TV Terminal
TERMINALS ON BACK OF TV SET
Split out
* Connect to one of the ANT terminals and select
the same antenna number on the TV.
SuOonoouuo?)

Additional Connections
¡O [Ree All connections on this page are made with 75 Ohm coaxial cables.
Without a Converter/Descrambler Box
VCR IN FROM ANT. TV
You can:
1} Use your VCR Remote Control to select channels.
2) Program one or more unscrambled channels for
unattended recording.
You cannot:
record or view scrambled channels IN FROM
ith thi CABLE
with
this
connection.
VHF/UHF
With a (CABLE to VCR) Converter/Descrambler Box
You can: Cable TV Converter
Box
VCR OUT TO TV TV
IN FROM ANT:
1) Record and view any channel including
scrambled channels; channel selection
must be made at the Cable TV Converter
IN FROM
Box. CABLE
2) Program one channel for unattended
recording.
VHF/UHF
You cannot:
select channels from VCR or TV.
With a (VCR to TV) Converter/Descrambler Box
You can: VCR
1) Use your VCR Remote Control to select channels.
2) Program unattended recordings of more than
one unscrambled channel. IN FROM
CABLE
You cannot:
record scrambled channels with this connection. Cable TV
Converter
With Two Converter/Descrambler Boxes
If you want to record and view
a combination of scrambled IN FROM
and unscrambled channels, TV CABLE
you will need additional
equipment.
This connection requires
Converter Box 1
VCR
2-Way
C
iT
two
converter
boxes,
Niue
Converter
an
A/B
switch,
and
OUT2
Box
2
a
2-way
splitter
<I
as
shown
here.
AA
p
"/ OUTTOTV

your TV is not stereo, you can connect a stereo amplifier to enjoy
stereo sound.
, ; :
If
your
TV
has
AUDIO
IN
and
VIDEO
IN
terminals,
you
can
connect
Audio/Video
Connections
your
VCR
to
them
to
receive
a
higher
quality
picture
and
sound.
If
Audio/Video Connections
IN FROM ANT
AUDIO IN alt OUT TO TV
! T (3-14
Model PV-7450 is shown here.
1 Connect the VIDEO OUT terminal on the VCR to the VIDEO IN terminal of your TV.
2 Connect the “L” and “R” AUDIO OUT terminals on the VCR to the “L” and “R” AUDIO IN terminals of your TV.
3 Set the VIDEO/TV selector of your TV (Monitor/Receiver) to “VIDEO.”
NOTE: To use your TV as a VCR monitor, set the VIDEO/TV selector on the TV (Monitor/Receiver) to “VIDEO.”
For model PV-7450, use the L Audio In jack for proper sound reproduction when connecting to a monaural TV.
Stereo Amplifier Connections
When you connect your VCR toa Stereo Amplifier
Stereo Component System, you
can view the picture from the VCR
while enjoying stereo from your
audio system.
Connect the “L” and “R” AUDIO
OUT terminals on the VCR to the
“L” and “R” AUDIO IN terminals of
your stereo.
VCR
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC in USA (and to the
Canadian Electrical Code in Canada) that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
O
O
5
-
0
O
c.
O
3
Y

Remote Control Buttons
VCR
See pages 24, 25.
POWER
See pages 12, 18, 19.
VCR/TV
See pages 12, 16.
PLAY
See pages 15, 21.
SELECT UP
See pages 12~14, 18~20, 26.
REWIND/ SEARCH
See pages 15, 21.
SET/BACKSPACE
See pages 12, 18, 19.
MENU
See pages 12, 13, 20, 26.
PAUSE
See pages 15, 16.
NUMBERED KEYS
See pages 13, 16, 21, 24.
DISPLAY/ENTER
See pages 14, 16, 20, 22, 25.
INDEX
See page 21.
SAP/Hi-Fi (PV-7450 only)
See page 23.
SPEED
See page 16.
TV
See pages 24, 25.
CATV
See pages 24, 25.
INPUT
See page 17.
FAST FORWARD/SEARCH
See pages 15, 21.
SET
See pages 12~14, 18~20, 26.
STOP
See pages 15, 16, 19, 21.
SELECT DOWN
See pages 12~14, 18~20, 26.
PROGRAM
See pages 18, 19.
RECORD/TIME
See page 16.
SLOW
See page 15.
ADD/DELETE
See pages 13, 19.
CHANNEL UP/DOWN
(TRACKING UP/DOWN)
See pages 12, 13, 15~17.
VOLUME UP/DOWN
See page 25.
ZERO SEARCH/
COUNTER RESET Model PV-7450 remote 1 MINUTE SKIP
See page 20. is shown here. See page 20.
Front View of the VCR
STOP/EJECT
CARCI Lote Cassette Compartment See pages
g
See
pages
15~17.
15~17,
19,
21,
26.
See pages 12, 15~17.
FAST FORWARD/
SEARCH
POWER
See
pages
15,
19,
21.
See
pages
;
12, 18, 19.
RECORD/TIME
See pages 16, 17, 19.
VCR/TV Selector
REMOTE
SENSOR PLAY
See pages
REWIND/SEARCH 15, 17, 19, 21.
See pages 15, 19, 21.
See pages 12, 16, 17.
Multi Function Display
See pages 11, 15-19.
10