Panasonic Omnivision PV-8664 User manual

Thank you for choosing
Panasonic
Omnivision
Video Cassette Recorder
suoljoauu0’)
peneis Buje
8Ld ~ Old
A EID ii.
A E i: ;
eir
nn
co,
5i
vonelado »iseg
£ed ~ 6ld
Operating
Instructions
ALLSET
RRE
verft
o
Easy Toping-
=
O
o
id
oF
€ 1
OU
d È
O
o
Please read these instructions carefully before attempting to
connect, operate or adjust this product. Please save this manual.
Spanish Quick Use Guide is included. (Guia para rápida consulta en español esta incluida. |
uongunoju| JALIO
190) 422g ~ Std
Quick Use Guide is on the back cover.

Things You Should Know
Date of Purchase
Cong 4 aralanan S nad Dealer Purchased From
on your purchase of one of the most sophisticated an
reliable products on the market today. Used properly, it Dealer Address
will bring you and your family years of enjoyment. Dealer Phone No.
Please fill in the information at right. The serial number Model No. PV-8664
is on the tag located on the back of your VCR. :
: i Serial No.
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
This video recorder, equipped with the HQ (High Quality} System, is compatible with existing VHS equipment.
Only use those tapes with the mark. It is recommended that only cassette tapes that have been tested
and inspected for use in 2, 4, 6, and 8 hour VCR machines be used.
FCC Warning: Any unauthorized changes or modifications to this equipment would void the user's authority to operate.
CAUTION This symbol warns the user that uninsulated voltage within the unit may
A
MA
have
sufficient
magnitude
to
cause
electric
shock.
Therefore,
it
is
dangerous
to make any kind of contact with any inside part of this unit.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR ACI) This symbol alerts the user that important literature concerning the operation
NO USERA SERVICEABLE PARTS INSIDE
REFER REACH TO QUALFED SERVE PERSCHAEL. and maintenance of this unit has been included. Therefore, it should be read
carefully in order to avoid any problems.
Table of Contents
Important Safeguards and Precautions .................... esses esee eene eee eenen nnne nnne nant asses eain rara cacns 3
Unpacking Your VCR * Product Features ....oooooooccccccnccccccnnnooonanonononononnannnacnncnarrocononnn nn nee en bd ann et rennes 4
VCR and Cassette Information (Record Tab, Tape Speeds, Head Cleaning, DST., Specifications) .................-. 5
Basic Connection (Antenna and VCR, VCR and TV) w.cccccccccccccceeseeecccececececcuctensesescescesrecsecesccaceeeccecsauauens 6,7
Other Connections (CABLE, Audio/Video) ...................eeeeee eee enhn terrm no nono see ro seen aetate ea sera assesses 8,9 -
Getting Started
Location of Controls (Remote Control, VCR) ........ccccccsccscssccsseccsesseccssesssscsececerscnsstssvevevenseesessaceceees 10, 11
One Time VCR Setup (On-Screen Language, Cable Box/ DSS Receiver Setup, Channel Memory, Auto Clock Set). 12 ~ 17
On-Screen Displays (OSD) (Function, Channel, Menu, VCR Status & Clock, Warning) .............. eee 18
Basic Operation
Playback a Tape (Main Operation, Special Effects, Quality Picture Features) .........csccccssecseccocsecccceeeeeessceeseusees 19
Record On a Tape (Main Operation, One Touch Record, Select Input Mode, Channel Selection) ................. 20, 21
Timer Recording (Main Operation, Cancel, Clear or Replace Program Contents) .................eeeeenene 22, 23
More You Can Do
Tape Operation (Commercial Advance, Movie Advance,
Index Search, Repeat Play, Zero Search, Shuttle Search, Auto Functions) ...........:scsccsseresecusseecscvecnnees 24 - 31
Special VCR Features (Channel Caption, Time Stamp, Blue Back ON/OFF, VCR Lock, Warning Beeper) .. 32 ~ 35
MTS Broadcast VHS Hi-Fi Stereo System (Stereo/SAP/Mono Broadcast, Select Audio Mode, Spatializer) .... 36, 37
VCR Plus+ Setup (Auto/ Manual VCR Plus+ Channel Setup) ...ooconcccccoononccccnanancnno eene emerserit 38 - 40
VCR Plus+ Programming (Main Operation, Make Correction) ............. eese nennen serre 41
Multi-Brand Control Feature ......ccccsscccsetecsssavecvecsoseccaocpearasddverbeuncasdssvaveciududdeceocccocdecesveseuveniucasvace 42, 43
Copying Your Tapes (Dubbing) (Connection, Main Operation, Monitoring) ............ eee 44
Other Information
Before Requesting Service (Self-check items) ...........:ccccssssetseesececsessesessssessceessesseseasenssssesseuasasseansoneves 45
AA O MH TOT —-——ER HT 46
A EN M LE MP TD 47
Spanish Quick Use Guide aii 48 -51
etie den REED Back Cover
2

Aya Important Safeguards and Precautions
FOR YOUR SAFETY, READ AND
RETAIN ALL SAFETY AND OPERATING
INSTRUCTIONS. HEED ALL WARNINGS
IN THE MANUAL AND ON THE UNIT
INSTALLATION
t POWER SOURCE CAUTION
Operate only from a power source indicated on the
unit or in this manual. If necessary, have your Electric
Utility Service Company or Video Products Dealer verify
the power source in your home.
2 POLARIZED OR GROUNDING PLUG
As a safety feature, this Video product comes with either
a polarized power cord plug (one blade is wider than the
other), or a three-wire grounding type plug.
POLARIZED PLUG CAUTION:
This plug will only fit into an outlet one way. If you cannot
tully insert the plug, try reversing it. If it still will not fit, have
an electrician install the proper wall outlet. Do not defeat the
safety feature by tampering with the plug.
R TION:
This plug will only fit into a three-hole grounding outlet. If
necessary, have an electrician install the proper outlet. Do
not defeat the safety feature by tampering with the plug.
3 POWER CORD
Make sure power cords are routed so that they are not
likely to have anything rest on them, roll over them, or be
in the way of walking traffic.
If an extension cord is used, make sure it also has either
a polarized or grounded plug and that the cords can be
securely connected.
Frayed cords, damaged plugs, and damaged or cracked
wire insulation are hazardous and should be replaced by
a qualified service technician.
Overloaded outlets and axtension cords are fire hazards
and should be avoided.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat
generated during operation. If they are blocked, heat
build-up inside the unit can cause failures that may result
in a fire hazard or heat damage to cassettes.
For protection, follow these rules:
a. Never cover ventilation slots or the unit while in use,
or operate the unit when placed on a bed, sofa, rug,
or other soft surface.
b. Avoid built-in installation, such as a book case or
rack, unless proper ventilation is provided.
5 AVOID EXTREMELY HOT LOCATIONS OR SUDDEN
TEMPERATURE CHANGES
Do not place the unit over or near any kind of heater or
regulator, in direct sunlight, inside a closed vehicle, etc..
Do not move the unit suddenly between areas of
extreme temperature variation. If the unit is suddenty
moved from a cold place to a warm place, moisture
may condense in the unit and on the tape.
6 TO AVOID PERSONAL INJURY
* Do not place unsecured equipment on a sloping
surtace,
* Do not place this unit on any support
that is not firm, level, and adequately
strong. The unit could fall causing
serious injury to a child or adult and
damage to the unit.
* An appliance and cart combination
should be moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the
appliance and cart combination to overtum.
* Carefully follow all operating instructions and use
the manufacturers recommended accessories
when operating this unit or connecting it to any
other equipment.
OUTDOOR ANTENNA INSTALLATION
1 SAFE ANTENNA AND CABLE CONNECTION
if an outside antenna or cable system
is connected to the equipment,
be sure the antenna or cable system
is grounded so as to provide some
protection against built up static
charges and voltage surges.
Section 810 of the National
Electrical Code, ANSI/NFPA 70
(in Canada, part 1 of the Canadian
Electrical Code) provides information z AACUM) CLAMPS
with respect to proper grounding of the IN
mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit,
Size of grounding conductors, location of antenna discharge unit, connection
to grounding electrodes and requirements for the grounding electrode.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES
OR CIRCUITS
An outside antenna system should be located well away from power lines,
electric light or power circuits and where It will never come into contact with
these power sources if it should happen to fall. When installing an outside
antenna, extreme care should be taken to avoid touching power lines,
Circuits or other power sources as this could be fatal. Because of the
hazards involved, antenna installation should be left to a professional.
USING THE VIDEO UNIT
If the unit has been in storage or moved to a new location,
refer first to the INSTALLATION section of these safeguards.
1 KEEP THIS VIDEO UNIT AWAY FROM WATER OR
MOISTURE OF ANY KIND.
2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
STRONG IMPACT, unplug the unit and have it inspected by a qualified
service technician before use.
3 DURING AN ELECTRICAL STORM
During a lightning storm, whether indoors or outdoors, or before leaving the
unit unused for extended periods of time, disconnect all equipment from the
power source as well as the antenna and cable system.
4 WHEN THE UNIT IS PLUGGED IN
* Never expose the unit to rain or water. DO NOT OPERATE if liquid has
been spilled into the unit. Immediately unplug the unit, and have it
inspected by a service technician. Fire and shock hazards can result from
electrical shorts caused by liquid contact inside.
* Never drop or push any object through openings in the unit. Some intemal
parts carry hazardous voltages and contact can cause electric shock or
fire hazard.
* Avoid placing the unit directly above or below your TV set as this may
cause electrical interference. Keep all magnets away from electronic
equipment.
5 USING ACCESSORIES
Use only accessories recommended by the manufacturer to avoid risk of
fire, shock, or other hazards.
6 CLEANING THE UNIT
Unplug the unit. Then, use a clean, dry, chemically untreated cloth to gently
remove dust or debris. DO NOT USE cleaning fluids, aerosols, or forced air
that could over-spray, or seep into the unit and cause electrical shock.
Any substance such as wax, adhesive tape, etc. may mar the cabinet
surface. Exposure to greasy, humid, or dusty areas may adversely affect
intemal parts.
SERVICE
1 DO NOT SERVICE THIS PRODUCT YOURSELF
If, after carefully following the detailed operating instructions, this Video
product does not operate property, do not attempt to open or remove covers,
or make any adjustments not described in the manual. Unptug the unit and
contact a qualified service technician.
2 IF REPLACEMENT PARTS ARE REQUIRED
Make sure the service technician uses only pans specified by the manufacturer,
or those having the same safety characteristics as the original parts. The use of
unauthorized substitutes may result in fire, electric shock, or other hazards.
3 HAVE THE SERVICE TECHNICIAN PERFORM
A SAFETY CHECK
After any service or repairs to the unit, request the service technician to
conduct a thorough safety check as described in the manufacture's service
literature to Insure that the video unit is in safe operating condition,

Unpacking Your VCR + Product Features
Unpacking Your VCR Loading the Batteries
The accessories below are provided to help
you use or set up your VCR.
1 Press down on the lb»
. mark and slide the Battery —
Accessories Compartment lid open. => Y
C)
Light Tower™ Universal E
Remote Control
VSQS1577 2 Install four batteries as
indicated inside the
Battery Compartment.
Batteries
A 4 "AA"
E
Mus
3 Slide the Battery
Compartment
lid back into place.
RF Coaxial
Cable
VJAS0196 Battery replacement caution
* Do not mix old and new batteries.
* Do not mix alkaline with manganese batteries.
To order accessories,
call toll free 1-800-211-PANA (7262).
Product Features
Advanced Noise Reduction e Cher oi Puce p Oven rex eec ea ERE dU VER Ue erae ety obUei due ta VER INEY ER 19
All Channel Auto Set/ 181-CH TV/ CABLE Tuner ............ sse nennen nnn nta 14 - 16
PUNO (e Qcl- eMe POT TENOR NS es 14 - 16
Auto Daylight Saving: WMC dd ds 5
Auto Features for a Quality Pictura A A elas 19
Auto Operation Functions (Auto Playback, Rewind, Tape Eject, Power off)... emnes 31
AUtO Repeat FUNCHON MMC 31
Cable Box Channel Control. iic dee tetra be o rep tet Wer ROC isa 13
Color: Noise HedUcllon« oct ssecdieucusiecstt autant lie ode Cu tae ae Sco Mu tUi IL eL e lag winta thers 19
COMMEICIAL tepore 24 -26
a "T 19
DynAmorphous™ Metal Head todita fogtus ont te te eoe Er RE CRUEL IRR No condo ci Te Dada 19
Easy-to-Head English/ Spanish/ French On-Screen Displays .............:c::ccccccssseeeeeeeess 14 - 16, 22, 23
Front-mounted A/V in Terminals ..............ccccccccccccncnccononicnnononnnccnconennonennonoca nnn hn her se snae s sts sess ss sare eer totas 44
FIBA A EET—————————— 5
Light Tower™ Universal Remote Control coco ococccoooocaccccncncooaccnoconononononononcnnonnonan n eere tenente e nnnm 10
NOVIO: AMINO Lo caper b Duae Hie etate Fede A a als e 27
MTS Broadcast System (Multi-channel Television Sound-Stereo, SAP, Mono) .....0.....ccssssesscessessccessensecserevenens 36
Multi Brand TV/ Cable Box/ DSS Remote Control oo... ccceeseeccacecsscesececneesvesceceseuseseceeeverecs 42, 43
One Month, 8 Program Timer Recording ........oocccocococcnccoccnccnnonnnnonanoncanannancoroconnarirnn ano eee 22, 23
One Touch Recording (Q TRO atacados cov tena dede tvi barres cr de datis eas iot de Sce CUR Fen I EIER 20
Program Director Remote Control .............. eese nenne nnnancancnnonocannccnaconocronocronanono 22, 23
Shuttle Seareli-c oap ecciesia al citas 30
locii qc P-———————— ———O— "—— ——— ——X ee 37
Special Effects Plåyback ieee phase Ue Ferne EP AN AAA A AAA 19
Special VCR Features (Channel Caption, Time Stamp, Blue Back ON/OFF, VCR Lock, Warning Beeper) ..... 32 - 35
SS so usce enti O A 38 - 41
VAS AFFI Stred. Syste M aco aont ter Maa de rnt verdt Di pai edel mi redet ta 37
VHS Index Search System (Direct Access Search, Program Index Search, Index Scan Search) .................. 28, 29
FA AAA O A PEN 30

VCR and Cassette Information
Erase Protection (Record Tab)
Cassettes have a record tab to ensure that
recordings are not accidentalty erased.
To prevent accidental erasure,
break off the tab with a screwdriver.
To record again, cover the
hole with cellophane tape.
Maximum Record/Playback Time
Only use tapes with the [VHS] mark in this unit.
Type of Video Cassette
Tape Speed
SP
(Standard
Play)
2
Hours
ES
5
Hours
4
Ho
SLP
8 Hours
Build-in Head Cleaner
A clean video head helps produce a clear picture.
So, we have equipped your VCR with a built-in, non
chemical head cleaning system that helps prevent clogging
of the video heads. Cleaning is performed each time you
load or unioad a video cassette.
Note: This feature is preventative only. If your video heads
are seriously clogged, consider the use of a
chemical nonabrasive head cleaning kit or take your
VCR to a Service Center.
Head Cleaning
Your VCR will not normally require head cleaning,
however, the heads may become clogged when playing
an old or damaged tape.
Video Heads Sensor System
If head cleaning becomes
necessary, the VCR will display
the screen shown to the right
while playing back a Video Tape.
To exit this screen, push PLAY
on the remote control or VCR.
* Use "dry" type head
cleaning cassette* only.
* Be sure to follow the cleaning tape instructions carefully.
Excessive use ot a cleaning cassette can shorten head life.
* if using a head cleaning cassette does not solve the problem,
contact your nearest Factory Service Center or authorized
Service Center. (See page 46.)
* Cleaning cassette part No. NV-TCL30PT is recommended,
VIDEO HEADS MAY
NEEO CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END:PLAY KEY
Reset all VCR Memory Functions
Use when moving the VCR to a new location, or if a
mistake was made in the One Time VCR Setup section.
* Make sure a tape is not inserted in the VCR.
1) Turn VCR Power on.
2) Press and hold both PLAY and CHANNEL A on the
VCR for more than 5 seconds.
* The power will shut off.
. 8) Perform the One Time VCR Setup section on page 14.
D.S.T. (Daylight Saving Time)
Your VCR can be set to automatically adjust the clock for
Daylight Saving Time. (Page 16.)
Spring (First Sunday in April)
When set to DST:ON, the VCR will automatically set the
clock ahead one hour.
Autumn (Last Sunday in October)
When set to DST:ON, the VCR will automatically set the
clock back one hour.
* if your area does not observe Daylight Saving Time,
select DST:OFF.
* Keep these time changes in mind when programming
the VCR for timer recordings.
120V AC, 60 Hz
Approx. 23 watts (Power on)
Approx. 3.7 watts (Power off)
Video Signal: EIA Standard NTSC color
Video Recording System: 4 rotary heads helical
scanning system
Power Source:
Power Consumption:
Audio Track: 1 track (Normal)
2 channel (Hi-Fi Audio Sound)
Tuner:
Broadcast Channels: VHF 2-13, UHF 14-69
CABLE Channels: Midband A through I (14-22)
Superband J through W (23-36)
Hyperband AA-EEE (37-64)
Lowband A-5-A-1 (95-99)
Special CABLE channel 5A (01)
Ultraband 65-94, 100-125
41°F~104°F (5*C-40?C)
1096-7596
7.7 lbs. (3.5 kg)
16-15/16" (W) x 7-13/16" (H) x
11-13/16" (D)
430 (W) x 98 (H) x 300 (D) mm
Operating Temperature:
Operating Humidity:
Weight:
Dimensions:
Note: Designs and specifications are subject to change
without notice.

gS Basic Connection
ANTENNA
INDOOR
—
OUTDOOR
——
Cable
TV
ANTENNA ANTENNA
or or
1 Disconnect the antenna or
cable from your TV and connect
it to the VCR (IN FROM ANT.)
VCR
ee
Y Antenna Cable
em o A
ad Qn
Be
e
3 set the Output Channel of your VCR RF Coaxial Cable .
to channel 3 or 4 (whichever is not being (VCR-TV Connection Cable) (supplied)
transmitted on by a Local TV broadcast).
2 Connect the VCR to your TV with
the RF Coaxial Cable (OUT TO TV).
WARNING
When
using
“Nut
type”
RF
coaxial
cables,
tighten
with
fingers
only.
Overtightening
may
damage
terminals.

Between Antenna and VCR
Case 1: Twin Lead Cable Only
To VCR Terminal
—
rc
Te
(Flat) Twin Lead
300 Ohm Cable
300-75 ohm Transformer
(not supplied)
Case 2: Twin Lead & Coaxial Cables
UHF/VHF
Band Mixer
(not supplied)
(Round) 75 Ohm
coaxial
Cable
To
VCR
Terminal
Case 3: Two Twin Lead Cables
UHF/VHF
Band Mixer
^
300-75
ohm
(not
supplied)
Transformer
(not supplied)
To VCR Terminal
* if your TV has both post and plug-type VHF
terminals, the post connection is recommended to
minimize signal loss. i
Between VCR and TV
Case 1: Screw & Plug Type Terminal
TV
UHF/VHF Band VHF
Separator
(not supplied)
UHF
RF Coaxial Cable
Case 2: Screw Type Terminal
75-300 ohm
Transformer VHF
(not supplied)
or
Case 3: Double Screw Type Terminal
TV VHF
UHF/VHF Band
Separator
(not supplied)
ff
L| a UHF
Case 4: Complex TV Terminal :
TERMINALS ON BACK OF TV SET
Split out
ANT2
* Connect to one of the ANT terminals and setect the
same antenna number on the TV.
O
Oo
=)
=]
©
O
2.
O
5
T)

Other Connections
z All connections on these pages are made with 75 Ohm coaxial cables.
CABLE Connections pag
Without a Converter/Descrambler Box IN FROM ANT.
You can:
1) Use your VCR Remote Control to select channels.
2) Program one or more unscrambled channels for IN FROM `
unattended recording. AE uM
You cannot:
— record or view scrambled channels with this connection.
With a (CABLE to VCR) Converter/Descrambler Box
You can: Cable TV Con-
verter Box
1) Record and view any channel including
scrambled channels; channel selection must
be made at the Cable TV Converter Box.
M
) Program one channel for unattended
recording.
You cannot:
— select channels from VCR or TV. VHF/UHF
— watch one station while recording another.
— place channels in memory other than the Cable box output channel.
With a (VCR to TV) Converter/Descrambler Box
You can:
IN FROM ANT.
1) Use your VCR Remote Control to select channels.
2) Program unattended recordings of more than
one unscrambled channel.
You cannot:
— record scrambled channels with this connection.
Cable TV
With Two Converter/Descrambler Boxes
If you want to record and IN FROM
view a combination of TV CABLE
scrambled and unscram-
bled channels, you will
need additional equip-
ment.
This connection requires
two converter boxes, an
A/B switch, and a 2-way
splitter as shown here.
Converter
Box 2
OUT TO TV
VHF/UHF
Coaxial Cable
OUT A/B Switch
8

With a DSS Receiver IN FROM
CABLE or Antenna |N FROM
You can: Satellite Dish OUTTO TV
O
O
=)
3
©
Y
=
o
5
0
1) Record and view any channel including
scrambled channels; channel selection
must be made at the DSS Receiver.
2) Program one channel for unattended record-
ing.
NOTE: The DSS receiver must be turned off to view
programs from a cable box or antenna. See the
DSS manual tor details. VHF/UHF
^;
"pss is a registered trademark of DIRECTV, INC., a unit of GM Hughed Electronics.
E : . If your TV has AUDIO IN and VIDEO IN terminals, you can connect your
Audio/Video Connections VCR to them to receive a higher quality picture and sound. If your TV is not
Stereo, you can connect a stereo amplifier to the VCR to enjoy stereo sound.
Audio/Video Connections
TV
IN FROM ANT
AUDIO IN
VIDEO IN (
1 Connect the VIDEO OUT terminal on the
VCR to the VIDEO IN terminal of your TV.
2 Connect the “L” and “R” AUDIO OUT terminals on the VCR to the “L” and “R” AUDIO IN terminals of your TV.
3 Set the VIDEO/TV selector of your TV (Monitor/Receiver) to “VIDEO.”
NOTE: Touse your TV as a VCR monitor, set the VIDEO/TV selector on the TV (Monitor/Receiver) to "VIDEO."
Use the L Audio In jack for proper sound reproduction when connecting to a monaural TV.
Stereo Amplifier Connections
When you connect your VCA to a Stereo
Component System, you can view the
picture from the VCR while enjoying
stereo from your audio system.
Connect the “L” and “R” AUDIO OUT
terminals on the VCR to the "L" and “R”
AUDIO IN terminals of your stereo.
Stereo Amplifier
IS
le]
^c
AUDIO
L
^
RN
`
ga, A
Note to CABLE system installer:
This reminder is provided to call the CABLE system installer's attention to Article 820-40 of the NEC in USA (and to the
Canadian Electrical Code in Canada) that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

TV
Remote Control Buttons See pages 42, 43.
EJECT LIGHT
See
pages
19,
43.
See
page
10.
POWER CABLE/DSS
See
pages
14,
22, 23, 41,
42.
See
pages
42,
43.
VCR INPUT
See pages 42, 43. See pages 20, 21.
VCR/TV FAST FORWARD/SEARCH
See pages 14, 21, 43. See pages 19, 25, 28, 29, 43.
SET
PLAY
See pages 19, 25, 27, 29, 43. See pages 14-18, 22-25, 27-29, 31-35, 37-41.
SELECT UP STOP
See pages 14-18, 22-25, 27-29, 31-35, 37-41. See pages 19, 20, 23, 27, 29.
SELECT DOWN
REWIND/ SEARCH 14- x x 5 -41
See pages 19, 28, 29, 43. See pages 14-18, 22-25, 27-29, 31-35, 37-41.
SET/BACKSPACE PROGRAM
See pages 16, 17, 22, 23, 32, 33, 39-41, See pages 22, 23, 41.
ACTION RECORD/TIME
See pages 15-18, 24, 25, 31-35, 37-39. See pages 20, 43.
ZERO SEARCH/ COMMERCIAL ADVANCE SLOW
See pages 25, 30, 43. See pages 19, 43.
PAUSE ADD/DELETE
See pages 17, 23, 32, 33, 39-41.
INDEX/ENTER/MOVIE ADVANCE
See pages 27-29, 42, 43.
See pages 19, 20, 44.
NUMBERED KEYS
See pages 17, 20, 24, 28, 41-43.
COUNTER RESET DISPLAY
See pages 30, 43. See pages 18, 20, 30, 36, 43.
SPEED CHANNEL UP/DOWN
See pages 20, 43. (TRACKING UP/DOWN)
TTEN See pages 14~17, 19~21, 43.
SAP/Hi-Fi
See pages 37, 43. VOLUME UP/DOWN
See page 43
Light Tower Universal Remote Control
Light button: When the LIGHT button is pressed, the buttons which can be activated in the selected mode will light and the
selected mode button (TV/VCR or CABLE DSS) will flash for 5 seconds. If no buttons are pressed within 5
seconds, the light will turn off in order to converse battery power. Also, while holding down the buttons, the
selected mode button will flash so you will be able to see, in the dark, which mode has been selected.
EJECT button: When EJECT is pressed, the tape is ejected from Cassette Compartment.
If EJECT is pressed during recording, the VCR will not respond to the command.
Front View of the VCR
CHANNEL UP/DOWN STOP
TRACKING/V-LOCK See pages
VCR/TV Selector See pages 14, 19-21. Cassette Compartment 19, 23, 27, 29, 44.
See pages See pages 19, 20, 27, 44.
14, 21, 44. PLAY
See pages
19, 25, 27, 29, 44.
POWER
See pages ;
SHUTTLE Ring
14,
22, 23,
41.
(For
Fast
Forward
or Rewind Search)
See pages
VIDEO
Input
Peu
Connecter
See page 44. Multí Function Display
AUDIO
Input
See
pages
11,
20-23,
41,
44.
ima
les
Connecter
REMOTE
See
page
19.
20,
35.
44.
See
page
44.
SENSOR
10

Timer Indicator ,
Multi Function Display i
Lights when the VCR is set for a Timer
Cassette-In Indicator | PN dl
Eights when atape Is IN: Ro ver The Timer Indicator flashes when a Timer
Recording is set, but a tape has not been
REC(ord) Indicator inserted into the VCR.
Lights during recording. .
SPEED Display
i din eed.
Displays
the
recording
spee
SAP
Indicator
Lights when the station you are
tuned to is broadcasting SAP.
Power Indicator .
Lights when power is on. STEREO Indicator
Lights when the station
you are tuned to is
broadcasting stereo.
C)
M
=
-
ite:
o
ct
£y
=
ct
O
len
un B BU Lb
Lui oT I AM
ieu VCR t M . PM
Hi-Fi Indicator
Lights when Hi-Fi audio is
monitored or played back.
Clock/Status/Channel Display
Displays the current time.
Briefly displays VCR status when
ke sinite VCR/TV a function button is pressed. yt
A ctor is set to VCR ' Briefly displays the channel
Function Indicator ; number, or "L1" or "L2" when a
Shows what the VCR is doing. channel or line input is selected.
and» Record Displays the tape counter during
and || ^ Record-pause tape OBOISHOnE
> Playback
Slow motion or Frame advance
i Play-pause
4 Flashing Rewind or Rewind search
> Flashing Fast forward or Forward search
I] Flashing Cassette ejecting
\ a
Rear View of the VCR
AC Power Plug
While plugged into an AC outlet, Video Output Connector
the VCR consumes 3.7 W of See pages 9,,36, 44.
electrical in OFF condition. Audio Output Connector (L/R)
OR NT See pages 8, 36, 44.
VHF/UHF Antenna
Input Terminal
See pages 6-9, 12, 36.
VHF/UHF Antenna
Output Terminal
See pages 6-9, 12, 36, 44.
Audio Input Connector (L/R)
See pages 12, 44. Video Input Connector
See pages 12, 44.
Channel.3/4 Switch
See pages 6, 14.
11

b One Time VCR Setup
The setup on pages 14 through 16 is vital for proper VCR operation.
Please read the instructions carefully and in the order presented.
NOTE: These first two pages contain reference material needed for setup on pages 14 -16.
Please look over the information before you begin setup procedure.
Setup Overview
You will be performing the following tasks:
* Setting the language you want on-screen displays to appear in (English, Spanish, French).
Telling the VCR what kind of equipment you are using to receive channels and how it is connected.
Entering pertinent cable box or DSS receiver information if used.
Entering a local PBS channel so that the VCR can receive auto clock set data. (Not available in all areas.)
Placing channels in memory and setting the clock.
. * > o
Please Note Which Connection Type You are Using.
Make sure all equipment is hooked up as described on pages 6-9.
The diagrams below illustrate some of the basic connection types.
Confirm which type you used for later reference.
Connection TypeA Connection Type B
«CABLE BOX > VCR > TV» <VCR > TV»
Back
of
VCR
Back
of
TV
na
Fanii Back of VCR
From Antenna
or Cable
Antenna
|
|
RF Coaxial Cable
(supplied)
PE
ene
Back of TV
or Antenna DSS Box Dish
Or, «VCR > CABLE BOX > TV»
Back of VCR Back of T
Or, <ANT/CABLE BOX > DSS 20s > VCR > TV» From Antenna [ E hee "ET
Hows: Cable Box Back of Eis | lad O nats
|
SATELLITE a
RF Coaxial Cable
(supplied)
C"
This
connection
allows
p
ERES
A
A...
PRES
i
Cabiel
į
viewing
(not
recording)
|
D
Dor
AF omens of scrambled channels.| Cable Box} (ww uow
»" ey j L E RON HORROR
E sora out To ty 8 j
©) ©) bi | es)
=m" Back of VOR acer
ONE TIME SETUP IMPORTANT NOTES:
* For detailed DSS receiver connection instruction, please see your DSS operating manual.
* The DSS receiver must be turned off to view programs from the cable box or antenna.
* |f you use a DSS receiver, it must be turned off for auto clock set.
* If your cable box is not remote controllable, it must be tuned to your PBS channel.
* If you use Audio/Video Jack connection between the VCR and cable box or DSS receiver, you must also
connect the RF coaxial cable in order to use the auto clock set and channel auto set features.
12

Cable Box/ DSS Receiver Code Number List
If your cable box or DSS receiver is remote controllable, refer to this list during setup on page 14.
Cable Box
Brand ode Numbers Brand o umber:
AChE ...oananeessnnesoosesoaaaanaa m 01, 05, 06, 44, 63 Regal TET 14, 15, 28, 41, 102, 103, 104
E SR 0144.85 o An 28
Cableview ........................... 04, 30, 42, 44, 52, 63 Rembrandt ................... 01, 29, 32, 39, 42, 44, 63 2
Century ITA 44, 51, 59, 75 Samsung eee, 09, 06, 32, 40, 42 D
Citizen ............. enne OA; 20; 42; 44,32,99 Scientific Atlantic ....................... 08, 09, 61, 53 rt
Components ............. eere 32, 39, 42, 44 A IN dat o 27 =
Cuties EAE 08, 09, 53, 61 oc ee ak 25 È
Diamond 55 xe eios etti ya Veni lux 01, 44, 63 SL Marx aaau. 06, 32, 40, 42, 43, 44, 52, 63
Eagle ............. eee 13, 20, 22, 26, 40, 58, 62 SDUGBÍ A efte etti 16, 17 9
Ecc or M EE. 28 o E
GC Brand cis 04, 30, 42, 44, 52, 63 Stargate PM 04, 06, 30, 32, 40, 42, 44, 52, 63 ^
Gemini ........... SISSI 04 Sylvania MOM anys IAEA A: 19 o
General Electric................eeeee 01, 57 Tetecaption nido 77
General Instruments A N ie art 74
eren 01, 02, 03, 04, 34, 55, 83, 65, 67, 68 Teleview ......... c. 06, 32, 40, 42 -
Hamlin cococarmerorrros 14 1552041, 102,103, 104 A 18,19
Hitachi 2n icu iea e eade iaae 31, 79 TOGO Ls o neredreretreccecir Sez 01, 33, 34, 42, 66
METS a Aa POE ETT E TEA 04 are ii A EEEE ENEE 36
Jerrold ........ 01, 02, 03, 04, 34, 55, 83, 65, 67, 68 E n abest 01, 44, 63
A sites ia que acea caine ba er Ero See FEE EE nee 31 Universal ..........ccccccccceceeeecsnseeeee 42, 43, 44, 52, 63
Magnavox MTM 26 Viewstar ..........ccccccccceeee 13, 20, 22, 26, 40, 58, 62
Matsushita iaa VO, 17 Mid Taciigs cus one sensn Rui i ea E 64
Movietime ............. nennen 32, 39, 42, 44 IET RUM OUT OI 36, 64
NEC...... EUNTES EEN A osc s 32, 38, 40 MIC Wa ascuas Oly 2, S0
NOVAUISION Seater pat 08, 09, 53, 61 A edat iti abil te 07, 23, 50
A afa i actae cca: 32, 38, 40 DAS
Oak... OO 11, 46, 101 DSS (Digital Satellite System Receiver)
Oak Sigma ..........eneneneeennnne 11, 46, 101 LA oci cesset odii deett uh 93
Panasonic ........seeseeeenenenne nennen 16, 17 HUOHBS iioc edente en d bia cadet 93
Ale Pi ini? 07, 13, 20, 23, oe 2 Magnavox 1/ Uniden 1 .............. sess 94
a oer I A A A ANONS a Maanavox 2/ Uniden 2 ............. ccce 95
Pulsar ............eeereeenn 04, 30, 42, 44, 52, 63 Panasonic MM c mi cU DEM E cR es 96
QUEE cseteris eo ES coe E EE 05, 06 Tre MN eas tact, ite NEU EMT MEER 97
Radio SHACK, RECOTON ........... 44, 51, 59, 75 A RN 98, 105
ra ti tie Hut io et 19/17 o saison oie TOR nates red 92
E A nempe 44, 51,59, 75
Note: During setup you will be instructed to enter your brand code number. As some brands have multiple
codes, it may be necessary to try different codes to attain the proper results.
These codes are for Cable box or DSS Box setup for Auto Clock and VCR Plus+ recording only.
For TV/Cable Box Multi-Brand Control operation, please see page 42.
Positioning Your Cable Box or DSS Receiver
If your cable box or DSS receiver is remote controllable, place it on or near the VCR as shown in the exampte
below. The VCR transmits an infrared signal from two locations. Be sure not to cover the transmitter windows.
13

b
One
Time
VCR
Setup
|
*Important: If the remote control POWER, ACTION, PROG, CHAY, INDEX/ M/A SKIP or ADD/DLT button
does not work when pressed, press the VCH button on the remote and try the button again.
When
the
VCR
is
turned
on
for
the
first
time,
To
Set
the
Language,
Cable/DSS
it
automatically
enters
the
setup
mode.
Receiver,
Channels
and
Auto
Clock
Setup inctudes the following:
* Choose the language for on-screen menus 1
and messages. Turn the TV and VCR on.*
* Tell the VCR how your equipment is hooked up
(pages 6-9) so the VCR can correctly place
channels into memory. 2 Tune
: your TV to the VCR output channel (the same
Set ev roreddy IOF Cek seh one you set on the back of the VCR: CH3 or CH4).
* If you used audio/video jack connection, tune the TV to its video input.
3 Press CH A for English
on-screen displays. SELECT LANGUAGE
PUSH VCA CH A4: ENGLISH
Or, press CH V for Spanish
on-screen displays.
Or, press VCR/TV for French
on-screen displays.
* You can also set the language using the buttons on the VCR.
* If the wrong language is set, see the “Reset all VCR Memory
Functions" section on page 5.
* The VCR should be connected to an antenna or cable box
(page 6-9).
OPRIMIR VCR CH ¥: ESPANOL
APP. VCR/TV — : FRANCAIS
Á Press AY to select your hookup, | SAETHAR me
and then press P to set. VCRPCABLE/DSS BOX TV
VCRPTV
* If you selected “CABLE/DSS BOX VCR
PTV,” continue with step 5. If not, go to
"Alternate Instructions on page 16. SELECT: : M Bod
* If you are using the CABLE/DSS BOX» ¿ACTION KEY
VCRPTV connection method, only the
cable box output channel will be placed in memory.
D Press AV to select your cable SELECT UE SUGHETÓ
box or DSS receiver output l
channel number, and then CABLE/DSS BOX OUTPUT CH
press P to enter.
* If necessary, refer to your cable RET C14 KEY
box m y END — :ACTION KEY
* If both a cable box and DSS receiver are used,
set the output channel of the DSS receiver.
* If you are using Audio/Video jack
connections to your cable box, select and
set "VIDEO OUT" as the output channel.
6 Press AV to select your cable :
box or DSS receiver code number,| fErERRING TO MANDAL
and then press > to enter. m
é a j
Using AW4b keys (Refer to the list on page 13.)
When a menu screen is displayed, 4 » * If your cable box or DSS receiver BENE.
the PLAY, STOP, REWIND, and FF doesn't have a remote control, END — :ACTION KEY
buttons on the remote control function Y select “NO REMOTE.” Then, go to
as AV«4» only. Use the buttons on the VCR for Alternate Instructions on page 16.
play, stop, rewind, and fast forward functions. * This determines whether the VCR will
When
a
program
screen
is
displayed,
the
REC,
FF,
control
your
cable
box
or
DSS
receiver.
REW, and PLAY buttons on the remote control and
the VCR function as AW only. (See Timer
Recording Using VCR Buttons on page 23.)
14

If Cable Box
If you use a cable box,
tune it to channel 02.
If you use a DSS receiver,
tune it to channel 270.
PLEASE TUNE YOUR CABLE
BOX TO CH02.
If DSS Receiver
T Press to continue.
e "NOW TRANSMITTING” appears. [RECEIVER TO CH 270.
RECEIVER TO CH 270.
PROCEED: » KEY
END =: ACTION KEY
If Cable Box
iS YOUR CABLE BOX
RECEIVING CH 09 ?
YES
NO
8 Press AY to select
“YES” or “NO,” and then
press P to enter.
If you use a cable box and
selected “YES,” go to step 9.
If you use a DSS receiver
and selected “YES,” go to
“Alternate Instructions”
on page 16. YES
If
you
selected
"NO,"
the
screen
seLecr
a
Y
Kev
in step 6 on page 14 will reappear. | END — :actron KEY
Try entering a different code
assigned to your brand and/ or
repositioning the equipment (see page 13).
If the answer is still "NO," cable box or DSS receiver
control is not available.
For channel and clock auto set, press ACTION to display
the "SET UP CHANNEL” screen. Then, press AY to select
"AUTO SET." Now, press > and CH A to start the auto set.
ser If DSS Receiver
IS YOUR OSS RECEIVER
RECEIVING CH 200?
Confirm that your cable box is on
and that your DSS receiver is off.
9 press AV to select your PES CHANNEL ON CABLE BOX
locat PBS channel number CH 0!
you receive on your cable
box, and then press P to
display the “CLOCK AUTO
SET” screen.
SELECT:A Y KEY
SET >» KEY
END :ACTION KEY
1 ÜPress CH A to start Auto CLOCK AUTO SET
Clock Set. . CONNECT ANTENNA CABLE
* If you live near a different time AND IF YOU U
BOX, TUNE IT TO
zone, be sure to enter the PBS LOCAL PBS CH THEN...
channel in your time zone.
* “AUTO CLOCK SET
PROCEEDING” appears.
PLEASE PUSH CH UP KEY
1 1 This display appears when
auto clock set is completed.
Confirm that the time is AUTO CLOCK SET
correct and press CH A COMPLETED
to exit. END : PUSH CH UP KEY
1/ 4/2000 TUE 12:00PM
ST :ON
DST:
SETTING : CH 02
If the Auto Clock Set
displayed time is incorrect...
If you use a cable box and receive
more than one PBS station, try auto
clock set again.
Follow the "To Set or Reset the Clock"
section on page 17 and when the
instructions call for you to enter a PBS
station, enter the one you have not
tried yet.
If “AUTO CLOCK SET IS
INCOMPLETE” appears...
The screen below will appear on-
screen if auto clock set data is not
available in your area.
AUTO CLOCK SET
I$ INCOMPLETE
PUSH ACTiON TO SET CLOCK
Press ACTION to display the "SET
CLOCK” (manual) screen, and
then do steps B and C on page 16.
Note:
If you use a cable box and receive
more than one PBS station, you may
exit the manual clock set screen and
try auto clock set again.
Follow the "To Set or Reset the Clock"
section on page 17 and when the
instructions call for you to enter a PBS
station, enter the one you have not
tried yet. i
IN + Auto clock set will be performed when the VCR is turned off the first time each day. If you use a cable box
[NOTE] and you want auto clock set to be performed, the cable box must be left on and tuned to the PBS channe!
VA before the VCR power is turned off.
e)
o
=
3
de
o
pe
QD
pa
(D
oa

One Time VCR Setup |
*Important: If the remote control POWER, ACTION, PROG, CHA/Y, INDEX/ M/A SKIP or ADD/DLT button
does not work when pressed, press the VCR button on the remote and try the button again.
Alternate Instructions
Complete the following steps if, any of the following applies:
* You selected connection type B (VCRPCABLE/ DSS
BOXE TV or VCRPTV) in step 4 on page 14.
* You selected "NO REMOTE” in step 6 on page 14
(your cable box or DSS receiver is not remote `
controllable).
* You use a DSS receiver and selected “YES” in step
8 on page 15.
1 The screen at the right
appears.
* If you use a DSS receiver,
it must be turned off.
CHANNEL/ CLOCK AUTO SET
CONNECT ANTENNA CABLE
B
LOCAL PBS CH THEN...
PLEASE PUSH CH UP KEY
2 Press CH A* to start Channel Auto Set and
Auto Clock Set.
* The following messages appear.
"CH AUTO SET PROCEEDING"
"AUTO CLOCK SET PROCEEDING"
This screen appears to confirm that
auto clock set is completed.
1/ 4/2000 TUE 12:00PM
DST :ON
SETTING : CH 02
3 Confirm that the time is AUTO CLOCK SET
correct and press CH A COMPLETED
to exit. END : PUSH CH UP KEY
If this screen appears, auto
clock set is not available in
your area. Please set the clock
manually as described below.
AUTO CLOCK SET
IS INCOMPLETE
PUSH ACTION TO SET CLOCK
A Press ACTION to display the
SET CLOCK screen.
B Press AV and «b to
SELECT:4 ¥ KEY
ET iP KEY select and set the month, S :
dáte, year, time, and ee
DST. (Daylight Saving Time).
To Make Corrections,
repeatedly press € > to move the cursor
to the incorrect entry and make the correction.
SET CLOCK
1/ 4/2000 TUE 12:00PM
DST:
SET COMPLETED
C Press ACTION twice to start
the clock and exit this mode.
SET :4 > KEY
START :ACTION KEY
16
SELECT/SET
{AV<4P) keys
A NUMBERED
C keys
.
C
100 key | ADD/
DELETE
CHANNEL UP
If the displayed time and DST.
are not correct...
If you happen to live close to two time zones,
the VCR may have recognized the PBS
channel (setting channel) in the wrong time
zone. Please do the following to correct the
situation.
a Make a note of the SETTING:CH number
shown on screen and press CH A to exit.
b Delete the setting channel from the VCR
channel memory. (See the "To Add or
Delete a Channel” section on page 17.)
c Press ACTION to display the menu.
| d Press AV to select “SET CLOCK,” and then
press B to display the “SET CLOCK’ screen.
e Press AV and P to select and set “AUTO
CLOCK SET." i
f Follow the One Time VCR Setup
instructions on pages 14-16,
* If you use a cable box and have multiple PBS
stations, tune the cable box to a different PBS
station and try auto clock set using the menu.

To Change On-Screen Display Language
1 Press ACTION to
display the menu. SET U
SET T Up FEATURE
2 Press AY to select SET UP CHANNEL
the language. RR ENGL I SH
English: LANGUAGE SET a^a =
Spanish: IDIOMA
French: LANGUE
3 Press > repeatedly to change the language.
PREPARAR VCR
REGLAGE MAGNETOSCOPE
FIJACION DE FUNCION REGLAGE MAGNETO SUPPLEM
A a REGLAGE HORLOG
ren
LANGUE/ LANGUAGE ESA REGLAGE CANA
LANGUAGE) («BITS FRANCA 1S
ELEGIA¡A Y TX
JAR
RÉGLER: >
TERMINAR: ACTION FIN ACTION
4 Press ACTION to exit this mode.
To Add or Delete a Channel
1 Select a channel using the
NUMBERED keys to add
or CH A/ Y to delete.
2 Press ADD/DLT to add
or delete the channel.
* To select a channe!
once it's deleted,
use the NUMBERED keys
on the remote control.
CHANNEL 08 ADDED
CHANNEL 08 DELETED
To Set or Reset the Clock
In case the clock is wrong, or a power failure occurred.
1 Press ACTION to display
the menu.
2 Press AV to select "SET
CLOCK,” and then press
SET UP VCR
P FEATURE
SET UP CHANNEL
e À Li
> to display the “SET
CLOCK' screen.
AUTO CLOCK SET
3 Press AV to select
“MANUAL,” and then Lom.
press P to display the Sete Key
SET CLOCK screen. a ata nd
4 Press AV and 4P to
select and set the date,
time and DST.
(Daylight Saving Time).
SELECT: 4 Y KEY
5 Press ACTION twice to | SELECT:
4 = » KEY
start the clock and exit END ¡ACTION KEY
this mode.
14 4/2000 TUE 12 oe
* For Auto Clock Set, select “AUTO CLOCK SET,”
and then follow the One Time VCR Setup instructions
on pages 14~16.
To Replace Channels in Memory
In case you have cable installed, etc.
1 Press ACTION to display
CLOCK AUTO SET” screen.
5 Follow the One Time
VCR Setup instructions on
page 14~16.
* Clock Auto Set will be
performed when channels
are replaced in memory.
To cancel, press STOP when “AUTO CLOCK
SET PROCEEDING?” appears on-screen.
the menu. a UP VCR
Y UP FEATURE
2 Press A¥ to select “SET
UP TS) and then SELECTA od
press B to display the SET — :b KEY
“SET UP CHANNEL” screen, LEO Action rer
3 Press AY to select G)
“ANTENNA,” and then 777" SET UP CHANNEL =-=- o
press P to set your antenna ct
system (TV or CABLE). E
4 Press AV to select "AUTO “SELECT: ʻa v KEY P
SET,” and then press >> END. ee pal
to display the “CHANNEL/ D
D
o
CHANNEL! CLOCK AUTO SET
CONNECT ANTENNA CABLE
PLEASE PUSH CH UP KEY
To Setup the VCR in Case a Cable Box or
DSS Receiver was Installed-or Replaced
1 Press ACTION to display
the menu.
2 Press AY to select “SET
UP CHANNEL," and then
press P to display the "SET
UP CHANNEL?” screen.
DSS BOX SET UP,” and
then press P to display the
"SELECT HOOKUP” screen. [vc
* To exit this mode, press SET iP KEY
ACTION three times. END. ¿ACTION KEY
4 Press AV and P to select KUP
and set "CABLE/DSS BOX GABLE Os oa
P VCR» TV,” and then VCRETV
continue with steps 5~8 on
pages 14, 15.
SELECT: da * KEY
END ACTION KEY
If these steps are completed,
the “SET UP CHANNEL” screen will appear.
When Using the 100 key
When selecting CABLE channels 100 to 125 with the
NUMBERED keys, first press the 100 key and then
enter the remaining two digits.
For example, to select channel 125:
Press NUMBERED keys 100, then 2, then 5.
* This VCR will accurately maintain its calendar up to Dec. 31, 2096, 11:59PM.
* Normal TV or Cable channels are automatically selected and placed in memory depending on how your VCR
is hooked up.
* [f you change your Cable Box or DSS Receiver, please perform the "To Set or Auto Clock Set" section above.

On-Screen Displays (OSD
*Important: If the remote control POWER, ACTION, PROG, CHA&/¥, INDEX/ M/A SKIP or ADD/DLT button
does not work when pressed, press the VCR button on the remote and try the button again.
Function & Channel Display
When a function button is
pressed, e.g. PLAY, or 08
you change channels, ABC
a 4 second display
appears first in large
and then small characters.
(Some Station names may
also appear if Channel
Caption is set. See pages 32, 33.)
Menu Screen
1 Press ACTION* to
display the menu.
2 Press AV and P to
make your selection. END
SET UP VCR
ET UP FEATURE
SET UP CHANNEL
Í .
:> KEY
¡ACTION KEY
* To get the most from each feature,
please read the Operating Manual
before attempting any operation,
VCR Status & Clock Display
Press DISPLAY to display or remove the
overlay shown below.
Function
Channel Caption
Status
(See pages 32, 33.)
Current Time
Rec Time
Remaining
(OTR mode only
see
page
20.)
Counter
Broadcast Audio
Being Received
(See page 36.)
* This display will
disappear in 5 seconds.
Tape Speed
(See page 5.)
Spatializer
(See page 37.)
Blank Tape/ No Video Signal Indication
Whenever a blank section of a tape comes up in Play
mode, or when the selected channel has no broadcast
signal with the Blue Back ON/OFF Feature (page 34)
set to ON, the TV screen will turn solid blue.
18
Warning and Instruction Displays
These displays will alert you of a missed operation or
provide further instructions.
If no active channels are found
for CHANNEL MEMORY...
(See page 16.)
If you attempt to set or review
a Timer Recording and the
Clock is not set...
(See page 22.)
After a Timer Program has
been set...
(See page 22.)
If you press REC on the
remote contro! or VCR,
and a cassette is inserted
with no record tab...
(See page 20.)
If you press PLAY, FF, REW,
or REC on the remote
control or VCR without
a cassette inserted...
(See pages 19, 20.)
If you press POWER or STOP
during a Timer Recording...
(visible in VCR mode only)
(See page 23.)
If head cleaning becomes
necessary while playing
back a tape...
(See page 5.)
If you press a function button
other than STOP/EJECT or
POWER on the VCR, or STOP
or EJECT or POWER on the
remote control while the VCR is
in VCR Lock mode...
(See page 35.)
If you press POWER, ACTION
or PROG on the remote while
in TV or CABLE/DSS mode...
(See pages 42, 43.)
NO CH FOUND
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PUSH VCR CH UP KEY AGAIN
PLEASE SET CLOCK
BEFORE PROGRAMM ING
TURN VCR OFF
FOR TIMER RECORDING
ANO
LEAVE CABLE BOX POWER ON
CHECK CASSETTE
RECORD TAB
NO CASSETTE
PLEASE INSERT A CASSETTE
TO CANCEL TIMER REC
PUSH POWER THEN STOP KEY
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSEAT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END:PLAY KEY
VCR LOCK ACTIVATED
NOW TV/CABLE/DSS MODE
PLEASE PUSH VCR KEY
ON REMOTE

Playback a Tape |
I check list before you begin.
O Ati connections are made.
(See pages 6-9.)
O TV and VCR are plugged in.
O TV is turned on and set to the VCR
channel (CH 3 or 4).
TRACKING/
V-LOCK
14 32
FF/REW
Multi Function Display Search
FF/REW
Search
V-LOCK
Caution:
Please inspect your cassette tapes
and remove any loose or peeling
labels to prevent them from
becoming jammed in your unit.
1 Insert a cassette.
TRACKING/
NE T
LAS
2 Press PLAY on the remote or VCR to start playback.
* Playback begins automatically if cassette has no record tab.
-+ VCR power comes on automatically.
* "VCR" lights in the Multi Function Display.
3 Press STOP on the remote or VCR to stop playback.
* To rewind the tape, press REW.
4 press EJECT on'the remote or VCR to eject the
cassette.
* You may eject a cassette with power on or off.
To Find a Particular Scene During Playback
Press REW or FF during playback to search for a scene.
« Search speed for SP mode tapes is 7 times and SLP mode tapes is
21 times the normal speed.
* Some noise bars will appear during search.
Special Effects During Playback
These features work best in SP or SLP mode. The sound will be muted.
Slow Motion Playback
Press SLOW to start slow motion playback during playback.
Press PLAY or SLOW to release.
Still (Freeze) Frame Picture
Press PAUSE to freeze and release the picture.
* To reduce picture noise, first press SLOW. Then, use CH
(TRACKING) A/Y to clear up the picture. Now, press PAUSE.
Frame by Frame Advance
In Still mode, hold down SLOW to advance the still picture one
frame at a time. Press PAUSE to release.
Features for a Quality Picture
Digital Auto Picture
This feature automatically controls the video output signal for
less noise depending on the tape condition.
Digital Auto Tracking
This feature continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control (to reduce picture noise)
Use during Playback and Slow Motion mode to reduce picture
noise. Press CH (TRACKING) A/¥ during playback until the
picture clears up. To return to Auto Tracking mode, press
POWER off and then on again.
V-Lock Control (to reduce picture jitter
In Still mode, CH (TRACKING) A/Y operate as a
V-Lock control. Press A/F until the picture is stabilized.
DynAmorphous'" Metal Head/ CNR (Color Noise
Reduction) ANR (Advanced Noise Reduction
DynAmorphous™ Metal Head increases playback and record
picture quality. Color Noise Reduction reduces the color noise.
Advanced Noise Reduction reduces the luminance noise.
SN + After the VCR is in Still or Slow mode for 3 minutes, it
will switch to the Stop mode automatically to protect the
tape and the video head.
uonelado oiseg

©) Record On a Tape
*Important: If the remote control POWER, ACTION, PROG, CHA/Y, INDEX/ M/A SKIP or ADD/DLT button
does not work when pressed, press the VCR button on the remote and try the button again.
Y check list before you begin.
O All connections are made.
(See pages 6-9.)
C VCR is plugged in.
U TV is tumed on and set to the VCR
channel (CH 3 or 4).
299
1
5
E—
—]
Multi Function Display 4
20
1 Insert a cassette with record tab.
* VCR power comes on automatically.
2 Press CH A/W* or NUMBERED ! aor
keys to select a channel. :
* Or, press CHANNEL A/F on the VCR.
* Holding down CH A/¥ will increase
the channel search speed.
* To record from an outside source,
press CH A/F or INPUT to select
“LINE1” or “LINE?” (see page 21).
3 Press SPEED to change the
recording speed.
+ SP = Standard Play ,
LP = Long Play
SLP z Super Long Play
(See page 5.)
Á Press REC/TIME on the remote control or VCR to
start recording.
* To edit out unwanted portions, press PAUSE to pause the
recording in progress.
To release, press PAUSE again.
(After the VCR has been in Pause mode for 5 minutes, it will
stop automatically to protect the tape and video head.)
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, press REC/TIME repeatedly to set the length of the
recording. Each press will change the stop time as shown.
C Normal Rec —»0:30 —» 1:00
4:004— 3:004—— 2:00 4— 1 E
* "TIMER" fights in the Multi Function Display.
* The remaining recording time can be displayed by pressing
DISPLAY in OTR mode.
5 Press STOP on the remote or VCR to stop recording.