Panduit Atlona AT-OME-WP-BKT User manual

1
Installation Guide
AT-OME-WP-BKT
Wallplate Bracket Mount
AT-OME-WP-BKT
1 x AT-OME-WP-BKT
1 x Product Insert
2 x Black wallplate screws
2 x Short wood screws
2 x Long wood screws
Package Contents
The Atlona AT-OME-WP-BKT is a mounting accessory for Omega™ Series wallplate transmitters
and other US one-gang products with decorator-style faceplates. It is designed for surface-
mount installation below a meeting table, or in a lecture, desk, credenza, or other furniture. The
OME-WP-BKT can also be installed onto a compatible equipment rack rail.
IMPORTANT: Visit https://atlona.com/product/at-ome-wp-bkt/ for the latest compatibility
list.

2
Installation Guide
AT-OME-WP-BKT
Mounting Instructions
1. Place the top screw holes against the surface it will be axed to and use the included
screws (select between the 8mm or 16mm screw based on the surface dimensions) to secure the
bracket.
2. Once secured to the surface, slide the compatible wallplate into the bracket and secure it
using the included wallplate screws.
AT-OME-SW21-TX-WPC
DEVICE
USB-CHDMI
HOST
LINK
PWR
NOTE: This product is rated for low voltage US 1-gang applications only. The wallplate
must be Decora style faceplate compatible.
AT-OME-SW21-TX-WPC
DEVICE
USB-CHDMI
HOST
LINK
PWR
© 2024 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered
trademarks are the property of their respective owners. Pricing, specications and availability subject to change without notice. Actual products, product images,
and online product images may vary from images shown here.
US International
atlona.com •408.962.0515 •41.43.508.4321
Version 1