PanelPilot SGD 24-M-IP User manual

M
M
M
IP67 Connection
Quickstart Guide
Issue 2 07/2018
5 Commonwealth Ave5 Commonwealth Ave
Woburn, MA 01801Woburn, MA 01801
Phone [phone]Phone [phone]
TollToll Free 1-800-517-8431Free 1-800-517-8431
Visit us at www.TestEquipmenDepot.com

3Open up the software on your PC and follow
step-by-step instructions for configuring your display.
Configuring your display
1Download PanelPilot M software onto your PC.
Getting to know your display
Accessories
What’s in the box?
- Panel meter
- Fixing kit
- Quick start guide
- CABLE IP-12W-RA
Panel Mounting Range
The SGD 24-M-IP can be tted into
panels of up to 10.5mm deep. A
rubber seal is included to seal the
mounting hole when the 32mm nut
is fully tightened. Panel mounting
hole cut-out is DIA 33mm.
Mounting bezel
TFT/touch screen
IP67 Connection
Back plate
Issue 2 07/2018
2Remove rear panel to access USB port and
connect the device to your PC using the CABLE
IP-12W-RA (not supplied).
Test Equipment Depot - 800.517.8431 - 5 Commonwealth Ave, Woburn, MA 01801 TestEquipmentDepot.com