Panoptigon Panochord User manual

1

2
IMPORTANT SAFETY INSTRUCTIONS
1 – Read and keep these instructions.
2 – Heed all warnings and follow all instructions.
3 – WARNING: To prevent fire or electric shock, do not expose this equipment to rain or
moisture. Do not use this apparatus near water.
4 – Clean only with a dry cloth.
5 – WARNING: To prevent excessive temperature rise, operate product only in free air
with unrestricted ventilation. Do not install in confined spaces or near heat sources such as
radiators, heat registers, stoves, or other apparatus that produce heat.
6 – Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding plug has two blades and a
grounding prong. The wide blade or third prong is provided for your safety. If the provided
plug does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
7– Protect the power cord from being walked on or pinched, particularly plugs,
convenience receptacles, and the point where they exit from the apparatus.
8 – Unplug the apparatus during lightning storms or when unused for long periods of time.
9 – The appliance coupler (or attachment plug) is the mains disconnect device and should
remain readily accessible when the unit is in use.
10 – Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
11 – This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
12 – Changes or modifications made by the user that are not expressly approved by the
manufacturer may void your authority to operate the unit.
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of
uninsulated “dangerous” voltage within the product’s enclosure
that may
be of sufficient magnitude to constitute a risk of electric shock to
humans.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in this manual.
CAUTION: DO NOT REMOVE THE COVER. NO USER–
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL.
WARNING: Do not expose this equipment to rain or moisture.

3
Panoptigon Chord Controller Package
Please verify that your package includes the following. If there are
any issues, visit Quilter Labs support at QuilterLabs.com.
• Panoptigon Chord Controller
• Power cable jumper
• Owner’s manual
• Deluxe case
Note: Please retain the shipping carton and packing materials in
the unlikely event that your Panoptigon Chord Controller needs
servicing.
Introduction
The Panoptigon Chord Controller is an accessory for the
Panoptigon Disc Player that provides a button array and
rocker-switches for playing the chord and special effects
tracks on Optigan discs. Additionally it offers sustained chord
accompaniment when playing Orchestron and Panoptigon discs
by sending the appropriate notes over MIDI. There is even a mode
for playing the chord tracks in the iOptigan app for the iPhone
or iPad. It also can be connected to a MIDI sound module to add
chord accompaniment!

4
MIDI Out Channel Knob
This selects the MIDI transmit data channel for the Chord Controller.
The channels available include 1 through 7 and 10. MIDI channel
10 is often used for drums or percussion sound modules, so this
allows for the possibility of using the Chord Controller as a simple
drum module controller.
Mode Select Knob
This knob selects from eight different modes that correspond to four
mappings, and a normal or radio operation for each mapping.
These are explained in detail in the paragraphs on the following
page.

5
MODE NUMBER MAPPING OPERATION
1Optigan Normal
2 Radio
3iOptigan App Normal
4 Radio
5Orchestron Normal
6 Radio
7Panoptigon Normal
8 Radio
Mapping
• Optigan:
○Selecting this mode will cause the Chord Controller to send out MIDI
data mapped to the chord and special effects tracks when playing
Optigan discs on a Panoptigon disc player. This mapping imitates
the function found on vintage Optigans and retains the peculiar
assignments of diminished chords to the A major and E major
buttons (more on this later).
• iOptigan:
○This position is for use with the iOptigan app (ioptigan.com).
It functions just like the Optigan mode above, but the track
assignment is changed to match that of the app. Use this mode
when using the Chord Controller to provide physical chord buttons
and special effects switches to an iPhone or iPad running the
iOptigan app (a MIDI adapter is also required).
• Orchestron:
○This mode sends MIDI data consisting of the three sustained notes
that make up the chord shown above the button. The chords are
open voiced, with the middle note of the chord moved up an
octave. So a 1-3-5 major chord will be voiced as 1-5 plus 3 an
octave up. Minor chords are generated in a similar way: 1-♭3-5
will be voiced 1-5 plus ♭3 an octave up. Diminished chords are
voiced 1-♭5 plus♭3 an octave up. The rocker-switches are not
mapped to any tracks/sounds in this mode.
• Panoptigon:
○This mode is the same as the Orchestron mode above, but is shifted
down an octave to take advantage of the extended range of the
Panoptigon disc format.

6
Operation
• Normal:
○This selection (odd numbered modes) will send a MIDI NOTE ON
command when a chord button is pushed or a rocker-switch is
toggled forward or back from its middle position. When a button
is released or a rocker-switch is returned to its middle position,
a NOTE OFF message is sent. The buttons and rockers work
independently from one another: You can press multiple buttons
at the same time and toggle multiple rocker-switches. The rocker-
switches are disabled in Orchestron and Panoptigon modes.
• Radio
○This selection (even numbered modes) latches buttons by sending a
MIDI NOTE ON command with a button press, and does nothing
on button releases. Button presses will cause the associated tracks
to play until other buttons are selected and the previously selected
buttons are released. This is done by sending MIDI NOTE OFF
commands for the released buttons and NOTE ON commands for
the newly pressed buttons. You can press multiple buttons at the
same time. Pressing the same button twice releases the latch and
will cancel (silence) the associated track. The rocker-switch behavior
differs for each mode:
■In Optigan and iOptigan modes, the rocker-switches operate
the same as in normal mode, i.e., they operate independently
from the buttons. Changing the position of a rocker-switch has
no effect on button behavior.
■In Orchestron and Panoptigon modes, moving a rocker-switch
will cancel any latched buttons. Rocker-switches will not send
MIDI NOTE ON commands, so no sounds will be triggered by
engaging them.
When changing modes, the Chord Controller will silence all notes that
are playing. This is done to prevent stuck notes.
MIDI Merge
The Chord Controller will merge MIDI data from its MIDI IN jack with
the MIDI data generated internally by the Chord Controller and send the
combined data to the MIDI OUT jack.
Highly sensitive MIDI operations, like lengthy System Exclusive messages,
are not recommended while performing with the Chord Controller. The
resulting delays may affect note timing.

7
MIDI Merge (Cont'd)
In Orchestron and Panoptigon modes, the Chord Controller will keep
track of MIDI NOTE ON and NOTE OFF data sent from a MIDI device
connected to the MIDI IN jack and MIDI data generated internally by the
Chord Controller. This is so notes played from a keyboard controller will
not be cancelled by the Chord Controller, and notes played by the Chord
Controller will not be cancelled by the keyboard controller. Notes will turn
off only when both controllers release the notes.
Hook Up (Power Supply Connections)
The Chord Controller is powered from 24VDC. The Quilter Labs PS-24
power supply should be used to provide the proper source of this DC
power. If you already have a Panoptigon, you can run both the Chord
Controller and the Panoptigon from the Panoptigon’s PS-24 supply. To
do this, plug the DC plug from the PS-24 into the Chord Controller’s
rear power input jack marked IN, then using the supplied power cable
jumper, plug the jumper from the power jack marked OUT to the power
jack of the Panoptigon (see picture below). If using the Chord Controller
without a Panoptigon, you can purchase a PS-24 from Quilter Labs, and
plug the supply’s output plug into the jack marked IN, leaving the OUT
jack open.
After connecting the power supply to the Chord Controller, plug the AC
cord from the power supply into an AC outlet. Confirm that the green
light on the power supply is lit, and the red light (near the top right) of
the Chord Controller is lit. If using the Panoptigon Disc Player as a sound
source, it can now be turned on.
Connect to:

8
MIDI Connections
The standard MIDI connection for use with a keyboard controller and
a Panoptigon Disc Player is shown below. Using two 5-pin DIN MIDI
cables, install one end of the first cable from the MIDI OUT jack of the
keyboard controller to the MIDI IN jack of the Chord Controller. Install
one end of the second cable from the MIDI OUT/THRU jack of the Chord
Controller to the MIDI IN jack of the Panoptigon Disc Player.
MIDI OUT
MIDI IN
MIDI
OUT/THRU MIDI IN
To connect to an iPhone of iPad, refer to the picture below. You will need
one 5-pin DIN MIDI cable and a MIDI adapter, like the iConnectMIDI1
interface from iconnectivity.com, which adapts USB and Apple Lightning
connectors to standard 5-pin DIN jacks. Install one end of the MIDI cable
from the MIDI OUT jack of the keyboard controller to the MIDI IN jack of
the Chord Controller. Install the MIDI IN plug of the adapter from the MIDI
OUT/THRU jack of the Chord Controller, and the Lightning connector to
the jack of the iPhone of iPad. Note: Older iPads and iPhones used the
30-pin dock connector. To connect to these older devices, you will need
an adapter that connects USB or Lightning to the 30-pin dock jack.
MIDI OUT
MIDI IN
MIDI
OUT/THRU
MIDI IN

9
Operation
Panoptigon Disc Player
• Put a disc in the Panoptigon (refer to the Panoptigon’s Owner’s
Manual). Select the proper mapping on the Panoptigon Disc Player
for the disc you are using (Optigan, Orchestron, or Panoptigon).
• Select the mode on the Chord Controller that matches the disc
type (Optigan, Orchestron, or Panoptigon), and select one of the
Operation types (normal or radio).
• Select the MIDI output channel on the keyboard and Chord Controller
that matches the receiving MIDI channel on the Panoptigon (or use the
ALL MIDI channel selection on the Panoptigon to confirm operation).
• Set levels and ensure that the disc is spinning.
• Use the white buttons to play chords. For Optigan discs, the rocker-
switches will play the sound effects tracks.
iOptigan App
• You can use the iOptigan app plus a Chord Controller with or without
a keyboard controller.
• Ensure one of the iOptigan modes is selected (either normal or radio).
• Confirm in the app settings that the adapter is recognized and that
the device is set up to receive MIDI.
• Confirm the MIDI OUT channel on the Chord Controller agrees with
the MIDI receive channel in the app.
• If using a keyboard controller, confirm the MIDI channel is properly
set to the same channels as the Chord Controller and app.
Other MIDI players
• You can use the Chord Controller with another MIDI sound module as
long as it can respond to MIDI NOTE ON and NOTE OFF messages
in the range of MIDI note number 38 to 80 (D2 to G#5).
• Use either the Orchestron mode or the Panoptigon mode (an octave
lower than Orchestron mode), and select one of the operations (either
normal or radio).
• Confirm the MIDI OUT channel on the Chord Controller agrees with
the MIDI receive channel in the module.
• If using a keyboard controller with the Chord Controller, the sound
module may support different note ranges and may receive on
multiple MIDI channels. Please check for compatibility in the device’s
owner’s manual.

10
Troubleshooting
Although there’s always the possibility of a factory defect, the vast majority of
problems are due to other elements used in conjunction with the Panoptigon
Chord Controller (e.g., a bad cable), a mis-set control, or a setting on the MIDI
sound module or player.
No Power
• Check that the AC cord’s IEC plug is inserted fully and firmly into the power
adapter.
• Verify that the power adapter cord is plugged into a working AC outlet.
• The PS-24 power supply has a green LED power indicator. If the power
supply is receiving power but the green LED is not glowing, then the power
supply is defective and should be replaced.
• Check that the red light on the top right of the Chord Controller is lit. It
should be illuminated if the power adapter is working.
No Sound when playing the Chord Controller
• Confirm that the Chord Controller’s MIDI channel matches the channel
selected by the MIDI CHANNEL on the receiving unit (or app). Put receiving
unit in OMNI mode. If this doesn’t solve the problem, check the MIDI cable
connecting your controller to the sound module.
• Check volume levels.
Unexpected notes from the MIDI player
• Make sure the proper mode is selected on the Chord Controller.
A major and E major Chords sound wrong in Optigan
and iOptigan modes.
• Yes. Yes they do. Optigan discs have 57 soundtracks--these provide
recordings of real musicians playing riffs, chord patterns and other effects.
37 of these tracks are reserved for the keyboard sounds--a different
recording for each note. This leaves 20 tracks for the rocker-switches and
chord buttons. The rocker-switches use 5 of these tracks, leaving 15 tracks.
The problem is that you only have 15 tracks for 21 chord buttons: C, D, E, F,
G, A and B♭major, plus their parallel minor and diminished counterparts.
7 buttons assigned to diminished chords share 3 tracks, leaving 12 tracks
for the 14 buttons (major and minor chords). So the Optigan recycles the
D diminished chord track for E major and the G diminished chord for A
major. Perhaps the Optigan manufacturer, Mattel, felt that most of the notes
matched anyway, so why waste the extra disc space? Consequently, playing
anything in A or E major using these buttons sounds questionable at best.

11
Care and Maintenance
Panoptigon Disc Player
• Unplug the power supply and disconnect it from the Chord Controller
when not in use.
• Use a microfiber cloth to clean your Chord Controller’s surfaces.
Avoid using liquids, because some of the surfaces and internal
circuitry can be damaged by water.

12
MIDI Implementation Chart
Function Transmitted Recog-
nized
Remarks
Basic Default 1-7, 10 X
Channel Changed 1-7, 10 X
Default X X
Mode Messages X X
Altered X X
Note 32-80, 90-95 X
Number True Voice X X
Note On X X
Note Off X X
Keys X X
Channels X X
Pitch Bend X X
1 X X
Control Change 64 X X
Program X X
Change True # X X
System Exclusive X X
System Song Pos X X
Song Sel X X
Common Tune X X
System Clock X X
Real Time Messages X X
All Sound Off X X
Reset All Controllers X X
Local On/Off X X
All Notes Off X X
Aux Omni Mode Off X X
Messages Omni Mode On X X
Mono Mode On X X
Poly Mode On X X
Active Sensing X X
System Reset X X
Mode 1: OMNI
ON, POLY
Mode 2: OMNI ON,
MONO
X X 0: Yes
Mode 3: OMNI
OFF, POLY
Mode 4: OMNI OFF,
MONO
X X X: No
Set via rotary switch
Set via rotary switch
Set by Key
Mapping switch
Velocity
Aftertouch

13
Function Transmitted Recog-
nized
Remarks
Basic Default 1-7, 10 X
Channel Changed 1-7, 10 X
Default X X
Mode Messages X X
Altered X X
Note 32-80, 90-95 X
Number True Voice X X
Note On X X
Note Off X X
Keys X X
Channels X X
Pitch Bend X X
1 X X
Control Change 64 X X
Program X X
Change True # X X
System Exclusive X X
System Song Pos X X
Song Sel X X
Common Tune X X
System Clock X X
Real Time Messages X X
All Sound Off X X
Reset All Controllers X X
Local On/Off X X
All Notes Off X X
Aux Omni Mode Off X X
Messages Omni Mode On X X
Mono Mode On X X
Poly Mode On X X
Active Sensing X X
System Reset X X
Mode 1: OMNI
ON, POLY
Mode 2: OMNI ON,
MONO
X X 0: Yes
Mode 3: OMNI
OFF, POLY
Mode 4: OMNI OFF,
MONO
X X X: No
Set by Key
Mapping switch
Track Assignment
The following reference chart shows the button and rocker-switch disc track
assignments with their associated MIDI note numbers.
Optigan Mode iOptigan Mode Orchestron Mode Panoptigon Mode
Switch/Button MIDI
Note
No.
Track
No.
MIDI
Note
No.
Track
No.
MIDI Note
Nos.
Track Nos. MIDI Note
Nos.
Track Nos.
Special Effects 1 90 1 91 1
Special Effects 2 91 2 92 2
Special Effects 3 92 3 93 3
Special Effects 4 93 4 94 4
Special Effects 5 94 5 95 5
B♭MAJ 38 6 46 6 58, 65, 74 26, 25, 22 46, 53, 62 56, 43, 28
F MAJ 41 9 47 9 53, 60, 69 37, 36, 21 41, 48, 57 55, 42, 39
C MAJ 43 11 48 11 60, 67, 76 36, 23, 20 48, 55, 64 42, 41, 26
G MIN 44 12 49 13 55, 62, 71 35, 34, 14 43, 50, 59 53, 40, 37
D MIN 46 14 50 15 62, 69, 78 34, 21, 13 50, 57, 66 40, 39, 36
A MAJ 50 18 51 18 57, 64, 73 33, 32, 17 45, 52, 61 51, 38, 35
E MAJ 51 19 52 19 64, 71, 80 32, 19, 4 52, 59, 68 38, 37, 34
B♭MIN 39 7 39 7 58, 65, 73 26, 25, 17 46, 53, 61 56, 43, 35
F MIN 40 8 40 8 53, 60, 68 37, 36, 16 41, 48, 56 55, 42, 46
C MIN 42 10 41 10 60, 67, 75 36, 23, 15 48, 55, 63 42, 41, 33
G MAJ 45 13 42 12 55, 62, 70 35, 34, 19 43, 50, 58 53, 40, 44
D MAJ 47 15 43 14 62, 69, 77 34, 21, 6 50, 57, 65 40, 39, 31
A MIN 48 16 44 16 57, 64, 72 33, 32, 24 45, 52, 60 51, 38, 30
E MIN 49 17 45 17 64, 71, 79 32, 19, 11 52, 59, 67 38, 37, 29
B♭DIM 50 18 32 18 58, 64, 73 26, 32, 17 46, 52, 61 56, 38, 35
F DIM 51 19 33 19 53, 59, 68 37, 31, 16 41, 47, 56 55, 49, 46
C DIM 52 20 34 20 60, 66, 75 36, 18, 15 48, 54, 63 42, 48, 33
G DIM 50 18 35 18 55, 61, 70 35, 29, 14 43, 49, 58 53, 47, 44
D DIM 51 19 36 19 62, 68, 77 34, 16, 13 50, 56, 65 40, 46, 31
A DIM 52 20 37 20 57, 63, 72 33, 27, 24 45, 51, 60 51, 45, 30
E DIM 50 18 38 18 64, 70, 79 32, 14, 11 52, 58, 67 38, 44, 29

14
Important Information for Owners
Factory Service
Please retain the shipping carton and packing materials in the unlikely event your
Panoptigon Chord Controller needs servicing.
To return a product to Quilter Labs for service under the warranty policy, please
contact Quilter Labs by phone or email. Mail can be sent to Quilter Labs at
1700 Sunflower, Suite A, Costa Mesa, CA 92626. Please include the serial
number of the product and a copy of your sales receipt. Instructions on how to
send your product will be provided.
Do not attempt to open the product and service it yourself. Any attempt to service
the product by a non-authorized service technician may void your warranty.
FCC Notice
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the product into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warranty
For warranty or service information visit us online at QuilterLabs.com

15
Be sure to also check out the Panoptigon!

16