Pantone 2PTSK1456Y0BL User manual

DIGITAL CLOCK WITH BLUETOOTH SPEAKER
Models: 2PTSK1456Y0BL, 2PTSK1456N0BL, 2PTSK1456P0BL, 2PTSK1456E0BL
PRODUCT OVERVIEW
OPERATION
Power on and charging
Before rst time use, charge the product using the supplied Micro USB cable.
Plug the cable into the Micro USB port on the product and the other end to a
power source. Charge for 2 hours.
Press and hold the button to turn the product on.
Setting the time
Press the button, you will hear “clock mode” prompt.
Press and hold the button until the hour number will ash on the LED display,
use the / buttons to set the hour.
Press the button and the minutes numbers will ash on the LED display, use the
/ buttons to set the minutes.
Press and hold the button to nish setting the time.
Alarm settings
Press and hold the button until lights up on the LED display.
Press and hold the button and the hours number starts blinking, use the /
buttons to set the hour.
Press the button and the minutes number starts blinking, use the / buttons
to set the minutes.
Press and hold button to nish setting the 1st alarm.
To set the 2nd alarm, press the button 4 times until the 2nd lights up on the
LED display.
Press and hold the button until the hours number starts blinking, use the /
buttons to set the hour.
Press the button and the minutes number starts blinking, use the / buttons
to set the minutes.
Press and hold button to nish setting the 2nd alarm.
To turn off an alarm, press the button until one lights off on the LED display
To turn off both alarms, press the button repeatedly until both light off on the
LED display.
Front View
8 9
10
11
12
13
14
Side View
15
16
17
18
1. : press to adjust the brightness of the LED display.
2. : adjust time settings.
3. : adjust time settings.
4. : press and hold to turn the product on.
• When on, press to play/pause music playback.
• Press to answer an incoming call.
• Press again to end the call.
5. : press to play the next song. Press and hold to increase volume level.
6. : press to play the previous song. Press and hold to decrease volume level.
7. (mode) : press to switch to Bluetooth mode. When on alarm mode, press to
set alarms.
8. BT indicator: lights up when connected to a Bluetooth device.
9. TF (Micro SD) : lights up when a Micro SD card is inserted into the TF card port.
10. LED display.
11. (Alarm 1) : lights up when 1st alarm is set.
12. (Alarm 2) : lights up when 2nd alarm is set.
13. AM : lights up when on AM.
14. PM : lights up when on PM.
15. AUX port: use a 3.5mm audio cable (not included) to connect to an external
audio device.
16. TF Card/Micro SD card slot: insert your Micro SD card to play the songs stored
in your Micro SD card.
17. Microphone
18. Micro USB port: use the supplied Micro USB cable to charge the product.
Top View
1 2 3 4 5 6 7

Press the button, you will hear “clock mode” prompt.
Press and hold the button until the hour number will ash on the LED display,
use the / buttons to set the hour.
Press the button and the minutes numbers will ash on the LED display, use the
/ buttons to set the minutes.
Press and hold the button to nish setting the time.
AUX input mode
Connect your audio device to the AUX port on the speaker using a 3.5mm
audio cable (not included). The speaker will automatically enter AUX mode.
Press the button to play/pause the song. You can also control via your
audio device.
Press and hold the / buttons to decrease/increase volume level.
You can also control via your audio device.
Press the / buttons to play the previous/next song. You can also control
via your audio device.
TF Card/Micro SD card mode
Hands free phone call
Troubleshooting
Insert a TF card/Micro SD card into the TF (Micro SD) card slot on the product.
The product will automatically enter media playback.
Press the button to play/pause the song.
Press and hold the / buttons to decrease/increase volume level.
Press the / buttons to play the previous/next song.
Press the button to answer incoming calls.
Press the button again to end the current call.
Specifications
Compliance and Responsible Disposal
This product complies with the Australian Safety Standard AS/NZS 62368.1
to ensure the safety of the product.
Bluetooth Mode
When the product is turned on, press the button to switch to Bluetooth mode.
You will hear a voice prompt “Bluetooth Mode - ready to pair”, the BT indicator
will also ash. On your Bluetooth device, look for 2PTSK1456 in the list of
detected devices, and pair with it. Once successfully paired, a notication sound
will go off and the BT indicator will light up.
The product and your Bluetooth device will remember each other and
automatically connect when they are both turned on.
Press the button to play/pause the song. You can also control via your
Bluetooth device.
Press and hold the / buttons to decrease/increase volume level. You
can also control via your Bluetooth device.
Press the / buttons to play the previous/next song. You can also
control via your Bluetooth device.
For Technical and Warranty Support
1300 886 649
tempo.org/support
Distributed by Tempo (Aust) Pty Ltd,
PO Box 132, Frenchs Forest NSW 1640
Problem Solution
Product is not turning on • Charge for 2 hours and try again.
No audio • Increase the volume level on your Bluetooth device
Failed to connect to
Bluetooth
• Place the phone and product closer together.
• Check the Bluetooth menu on your phone to ensure it
is connected to the correct device.
• Restart the product. On your device, turn Bluetooth
off and then back on, and search again.
Battery capacity 1200mAh
Output power 3W
Charging time 2 hours
Play time 6-8 hours
Bluetooth operation range <10m
Weight 242g (approx.)
Dimensions (mm) 140(W) x 71(H) x 45(D)