Panyu Juda Car Audio Equipment CSMP92 User manual

USER MANUAL
CSMP92
SOUND BAR SYSTEM

IMPORTANT SAFETY INSTRUCTIONS:
For Your Attention
1. Read theseinstructions -All the safetyand operating instructionsshould be readbefore this productis operated.
2. Keep theseinstructions- The safety and operatinginstructions should beretained for futurereference.
3. Heed allwarnings -All warnings onthe appliance andin the operatinginstructions should beadhered to.
4. Follow allinstructions -All operating anduse instructions shouldbe followed.
5. Do notuse this apparatusnear water -Theappliance should notbe used nearwater or moisture- for example,in
a wet basementor near aswimming pool, andthe like.
6. Clean onlywith dry cloth.
7. Do notblock any ventilationopenings. Install inaccordance with themanufacture-s instructions.
8. Do notinstall near anyheat sources suchas radiators, heatregisters, stoves, orother apparatus (including
amplifiers) that produceheat.
9. Do notdefeat the safetypurpose of thepolarized or groundingplug. Apolarized plug hastwo blades withone
wider than theother.A groundingplug has twoblades and athird grounding prong.The wide blade or thethird
prong is providedfor your safety. If theprovided plug doesnot fit intoyour outlet, consultan electrician for
replacement of theobsolete outlet.
10. Protect thepower cord frombeing walked onor pinched particularlyat the plugs,convenience receptacles, and
at the pointwhere they exitfrom the apparatus.
11. Only use attachments/accessoriesspecified by themanufacturer.
12. Use onlywith the cart,stand, tripod, bracket,or table specifiedby the manufacturer, or sold with the apparatus.
When a cartor rack isused, use cautionwhen moving thecart/apparatus combination toavoid injury fromtip-over.
-1-

For Your Attention
-2-
13. Unplug theapparatus during lightningstorms or whenunused for longperiods of time.
14. Refer allservicing to qualifiedpersonnel. Servicing isrequired when theapparatus has beendamaged in any
way, such as powersupply cord orplug is damaged,liquid has beenspilled or objectshave fallen intothe
apparatus has beenexposed to rainor moisture, doesnot operate normally, or hasbeen dropped.
15. CAUTION: These servicing instructionsare for useby qualified servicepersonnel only. To reduce therisk of
electric shock, donot perform anyservicing other thanthat contained inthe operating instructionsunless you
are qualified todo so.
18. Do notinstall this equipmentin a confinedor building-in spacesuch as abook case orsimilar unit, andremain a
well ventilation conditionsat open site.The ventilation should not beimpeded by coveringthe ventilation openings
with items suchas newspaper,table-cloths, curtains etc.
19. WARNING-To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The
apparatus shall notbe exposed todripping or splashingand that objectsfilled with liquids,such as vases,shall not
be placed onapparatus.
20. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as
sunshine, fire orthe like.
21. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
16. This lightning flash witharrowhead symbol withinan equilateral triangleis intended toalert the userto the
presence of non-insulated“dangerous voltage” withinthe product’s enclosure that maybe of sufficient magnitude
to constitute arisk of electricshock.
- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable
parts inside. Referservicing to qualifiedpersonnel.
- The exclamation point withinan equilateral triangleis intended toalert the userto the presenceof important
operating and maintenanceinstructions in theliterature accompanying theappliance.
17. This equipment is aClass II ordouble insulated electricalappliance. It hasbeen designed insuch a
way that itdoes not requirea safety connectionto electrical earth.

For Your Attention
-3-
FCC STATEMENT
1. This device complies withPart 15 ofthe FCC Rules. Operation is subject to the following two conditions:
(1) This device may notcause harmful interference.
(2) This device must acceptany interference received,including interference that may cause undesired operation.
2. Changes ormodifications not expresslyapproved by theparty responsible for compliance could void the user's
authority to operatethe equipment.
NOTE: This equipment has beentested and foundto comply with the limits for a Class B digital device, pursuant to
Part 15 ofthe FCC Rules.These limits are designed to provide reasonable protection against harmful interference
in a residentialinstallation.
This equipment generatesuses and canradiate radio frequency energy and, if not installed and used in
accordance with theinstructions, may causeharmful interference toradio communications. However, there is no
guarantee that interferencewill not occurin a particularinstallation. If this equipment does cause harmful
interference to radioor television reception,which can bedetermined by turning the equipment off and on, the user
is encouraged totry to correctthe interference byone or moreof the following measures:
Reorient or relocatethe receiving antenna.
Increase the separationbetween the equipmentand receiver.
Connect the equipmentinto an outleton a circuitdifferent from that to which the receiver is connected.
Consult the dealeror an experiencedradio/TV technician forhelp.
IC STATEMENT
This device complieswith Industry Canadalicence-exempt RSS standard(s). Operation is subject
to the followingtwo conditions: (1)this device maynot cause interference, and (2) this device
must accept anyinterference, including interferencethat may causeundesired operation of the
Device.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
et (2) l'utilisateur de l'appareil doit accepter tout brouillage
d'en compromettre le fonctionnement."
exempts de licence.
doit pas produire de brouillage,
radioélectrique subi, même si le brouillage est susceptible
CAUTION:

For your Attention.....................................................................................................1-3
Contents.....................................................................................................................4
Features.....................................................................................................................5
Panel.......................................................................................................................6-7
Connections...............................................................................................................8
Remote Control.......................................................................................................9-10
Basic Playback......................................................................................................11-12
Trouble shooting........................................................................................................13
Specifications............................................................................................................14
Contents
Contents
-4-

Features
-5-
Thanks for your purchase of our product. Please read through this manual before making
connections and operating this product. Retain this manual for future reference.
Blue tooth playback
Line input
Optical input
Full function remote control
Package Contents:
User manual
User manual
Remote control
MUTE
STANDBY
CSMP91
AUX
Bluetooth
LINE
LOUDNE
ROCK
CUSTOM
POPS JAZZ
VOCAL
CINEMA
COAX/OPT

TOP PANEL:
Panel
-6-
1 STANDBY
2 FUNCTION
3 VOLUME+/-
4 EQUALIZER
FRONT PANEL:
11
1 DISPLAY SCREEN
11223344

SIDE PANEL:
Panel
-7-
11
1 LINE INPUT
REAR PANEL:
1 AC INPUT
2 OPTICAL INPUT
3 AUX INPUT
4 SUBWOOFER OUTPUT
5 COAXIAL DIGITAL AUDIO INPUT
3344
11
22
55

Connections
-8-
LINE IN/AUX IN
This unit hasan extra group of audio inputterminals.
You can input the analogue stereo audio signals from
extra devices suchas VCD, CD,VCR,MP3 player, etc.
Use the audiocable (red for right, white forleft) to
connect the stereo audio output terminals of a VCD,
CD, VCR player to the stereo input terminals (LINE
IN/AUX IN) ofthis unit.
Its corresponding signal source is LINE IN/AUX IN
which can be available by pressing [FUNCTION] on
the top panelor pressing [AUX]/[LINE] on the remote
control.
Subwoofer Output
Use speaker cable to connect the subwoofer
output of this unit .
SUBWOOFER
Speaker Output
Bluetooth Connection
The model of the unit is Sound Bar,press [FUNCTION] on
the top panel or press [Bluetooth] on the remote control
to switch to the corresponding signal source, use your
mobile phone tosearch the bluetooth signal of the unit,
then input thepassword 0000 ,the unit will synchronize
to play songs on your mobile phone while they connected
successfully.
Coaxial Digital Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power amplifier.
Digital Audio Input
Connections
-8-
LINE IN/AUX IN
This unit hasan extra group of audio inputterminals.
You can input the analogue stereo audio signals from
extra devices suchas VCD, CD,VCR,MP3 player, etc.
Use the audiocable (red for right, white forleft) to
connect the stereo audio output terminals of a VCD,
CD, VCR player to the stereo input terminals (LINE
IN/AUX IN) ofthis unit.
Its corresponding signal source is LINE IN/AUX IN
which can be available by pressing [FUNCTION] on
the top panelor pressing [AUX]/[LINE] on the remote
control.
Subwoofer Output
Use speaker cable to connect the subwoofer
output of this unit .
SUBWOOFER
Speaker Output
Bluetooth Connection
The model of the unit is Sound Bar,press [FUNCTION] on
the top panel or press [Bluetooth] on the remote control
to switch to the corresponding signal source, use your
mobile phone tosearch the bluetooth signal of the unit,
then input thepassword 0000 ,the unit will synchronize
to play songs on your mobile phone while they connected
successfully.
Coaxial Digital Audio
Use a coaxial cable to connect the coaxial output of this unit to the coaxial input of a power amplifier.
Digital Audio Input
COAXIAL
COAXIAL
Digital Audio Output
Use the optional optical cable to connect the optical output of your television or amplifier to the player.
Optical Input
OPTICAL
Optical Input
Optical Output

Remote control
-9-
Insert the batteries into the remote control. Point the remote control at the remote sensor on the front
panel. The remote control works within a distance of about 8 metres from the sensor and within an
angle of about 30 degrees from the left and right side.
Note:
Remove the batteries when you do not intend to use the remote control for a long time.
Weak batteries can leak and severely damage the remote control.
The batteries must not be exposed to excessive heat source, such as sunshine, fire or any other
things like that.
Be environmentally friendlyand dispose of batteries according to your government regulations.
Remote Control Operation
Battery Installation
Remove the battery
compartment cover on
the back ofthe remote
control.
Load aAAA/1.5V battery into the battery
compartment making sure that the
battery have been inserted with the
correct polarity matchingthe symbols +, -
as indicated insidethe battery
compartment.
Replace the cover.