Paradigm PWSOUNDBAR User manual

Step by step setup instructions to customize each setting.
Identifies functions and default features.
ARC™(Anthem Room Correction) Wireless Setup
10 Learn Remote 11 Operation
ARC – Anthem Room Correction: Factory Default = Off
Enables or disables ARC™(Anthem Room Correction).
To enable ARC™, please refer to the “ARC™(Anthem Room Correction)” section in the
Owner’s Manual for the room calibration procedure.
Once ARC™has been completed and the file uploaded it will automatically be enabled.
Press (Menu) on the Remote or the soundbar’s touch display.
Press (Scroll Down) to scroll down to the ARC submenu.
Press (Scroll Right) or (Select) to select the ARC submenu.
Press (Scroll Down) to scroll down to the desired option, either Off or ON.
Once the desired option is displayed, press (Scroll Right) or (Select)
to select Off or ON.
If the selection was successful the soundbar’s display will indicate Saved.
Wireless Setup
This setup option allows you to Initialize Wi-Fi (PW Soundbar ONLY) or
Bluetooth Pairing activation.
PW Soundbar ONLY:
IMPORTANT! We recommend using an Ethernet connection when connecting the soundbar
to your network. This is the most reliable setup method.
To configure a Wireless Network please refer to the DTS Play-Fi®and Apple AirPlay Quick
Start Guide for complete instructions.
The connection methods vary between the Play-Fi app and AirPlay.
Wireless Setup:
Press (Menu) on the Remote or the soundbar’s touch display.
Press (Scroll Down) to scroll down to Wireless Setup. Press (Scroll Right) or (Select) to
select the Wireless Setup submenu.
Press (Scroll Down) to scroll down to Initialize WiFi (PW Soundbar ONLY) or Bluetooth Pairing.
Press (Scroll Right) or (Select) to select the Initialize WiFi or Bluetooth Pairing submenu.
Initialize Wifi ONLY:
Press (Scroll Down) to scroll down to the desired option, either No or Yes.
If you selected Yes, the soundbar’s display will indicate Resetting.
If you selected No, the soundbar’s display will indicate No Changes made.
Bluetooth Pairing ONLY:
The soundbar’s display will now indicate pairing mode on.
Learn Remote
This function provides the ability to program a secondary remote. The soundbar will continue to
respond to the original remote and any programmed secondary remote that you wish to use
simultaneously.
For a complete list of programmable functions, please refer to the “The Menu System” section
in the Owner’s Manual.
If the operation was successful the display will indicate Saved.
If the operation was not successful the display will indicate Failed.
The operation will “Fail” if a command is already in use/programmed.
To Learn (program) a new remote:
Press (Menu) on the Remote or the soundbar’s touch display.
Press (Scroll Down) to scroll down to Learn Remote.
Press (Scroll Right) or (Select) to select the Learn Remote submenu.
Press (Scroll Down) to scroll down to the command you wish to program.
Press (Scroll Right) or (Select) to select the command submenu (For example: Volume + > ).
Push Button will be displayed on the soundbar’s display.
Holding the Secondary Remote remote approx 12” from the soundbar, push the button you wish
to program. The soundbar will then respond with “Push Button Again”. Holding the Secondary
Remote remote approx 12” from the soundbar, push the button a second time to confirm.
If your selection was successful the soundbar’s display will indicate Saved.
Power Settings: Power Standby / Power On Volume / IP Control / Standby IP
To change the Power
Standby option:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Power Settings. Press (Scroll Right)
or (Select) to select the Power Settings
submenu.
Press (Scroll Down) to scroll down to
Power Settings. Press (Scroll Right)
or (Select) to select the Power Standby
submenu.
Press (Scroll Down) to scroll down to the
desired option, either Auto Standby or Always
On.
Once the desired option is displayed, press
(Scroll Right) or (Select) to select Off
or On.
If your selection was successful the
soundbar’s display will indicate Saved.
To change the Power–on Vol:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Power Settings. Press (Scroll Right)
or (Select) to select the Power Settings
submenu.
Press (Scroll Down) to scroll down to
Power-on Vol. Press (Scroll Right) or
(Select) to select the Power-on Vol submenu.
Press (Scroll Down) to scroll down to the
desired option, either Set or Last Used. Press
(Scroll Right) or (Select) to select the
Set submenu.
To decrease the Power-On Volume setting,
press (Volume Down). To increase the
Power-On Volume setting, press (Volume
Up). When the desired level is displayed,
press (Scroll Right) or (Select) to select
the desired level.
If your selection was successful the
soundbar’s display will indicate Saved.
To enable IP Control:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Power Settings. Press (Scroll Right)
or (Select) to select the Power Settings
submenu.
Press (Scroll Down) to scroll down to IP
Control. Press (Scroll Right) or (Select)
to select the IP Control submenu.
Press (Scroll Down) to scroll down to the
desired option, either Off or On. Once the
desired option is displayed, press (Scroll
Right) or (Select) to select Off or On.
If your selection was successful the
soundbar’s display will indicate Saved.
To enable Standby IP:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Power Settings. Press (Scroll Right)
or (Select) to select the Power Settings
submenu.
Press (Scroll Down) to scroll down to
Standby IP. Press (Scroll Right) or
(Select) to select the Standby IP submenu.
Press (Scroll Down) to scroll down to the
desired option, either Off or On. Once the
desired option is displayed, press (Scroll
Right) or (Select) to select Off or On.
If your selection was successful the
soundbar’s display will indicate Saved.
POWER STANDBY: Factory Default =
Auto Standby
Configures the state of the soundbar’s
power on/Off to Auto Standby or Always On.
In Auto Standby the soundbar will power
down after 20 minutes if no signal is
detected.
POWER ON VOL: Factory Default = -35dB
Adjusts default volume level of the
soundbar when initially powered on.
It can be adjusted from -90dB to +10dB*.
*Maximum volume (+10dB) is not advised.
IP CONTROL: Factory Default: On
Enables/disables the state of the IP
control. This is only required if using an
Ethernet/Wi-Fi based home automation
system.
STANDBY IP: Factory Default = Off
Requires IP Control to be enabled in
order to function.
Standby IP allows the soundbar to receive
IP based commands while in standby
mode.
SETUP GUIDE
Source Name
This option allows users to create custom names for each input. Please refer to the ‘Menu Option: Source Name’ section in the Owner’s Manual for further details regarding this menu.
Service
This submenu offers the ability to perform factory resets and displays information about your soundbar’s current firmware versions & MAC addresses.
Press (Menu) on the Remote or the soundbar’s touch display.
Press (Scroll Down) to scroll down to Service.
Press (Scroll Right) or (Select) to select the Service submenu.
Please refer to the ‘Menu Option: Service’ section in the Owner’s Manual for further details regarding this submenu.
USB Upgrade
This menu option is used when performing a USB firmware update.
Press (Menu) on the Remote or the soundbar’s touch display.
Press (Scroll Down) to scroll down to the USB Upgrade submenu.
Press (Scroll Right) or (Select) to select the USB Upgrade submenu.
Press (Scroll Down) to scroll down to Upgrade All.
Press (Scroll Right) or (Select) to select Upgrade All. This will update your Soundbar’s USB firmware.
Please refer to the ‘USB Update’ section in the Owner’s Manual for further details regarding USB firmware updates.
User Tips
Each button on the remote corresponds to its dedicated input on the soundbar.
To access a specific input, simply select the corresponding button on the remote.
Pairing an additional device while on the Bluetooth input: Push & Hold the Bluetooth button on the remote for 4 seconds. The soundbar will emit a tone
confirming that the broadcast feature is now active and a new device can now be paired. Note! Once the tone is emitted, the original pairing will be cancelled along with the
media stream.
(PW Soundbar Only) Please refer to the Wireless Setup Guide for iOS and Mac Users for complete instructions on a Network Connection and playback via AirPlay.
Setting up Auto Power On Function (applies to North America ONLY):
To enable the Auto Power On Function, navigate the menu to the following location: Power Settings > Standby IP Control > On.With this setting enabled, the soundbar will
power on when a signal is detected from the Digital Optical or RCA Inputs.
Shown: Input Options on
Paradigm PW Soundbar
remote.
Paradigm SOUNDSTAGE Remote
PARADIGM ELECTRONICS INC.
PRINTING INK: Pantone 877 Silver
BASSMODE
NIGHTNORMAL BASS+
HDMI1
HDMIARCBLUETOOTH
OPTICAL1OPTICAL2
ANALOG1 ANALOG 2
HDMI2 HDMI3
POWERMENU MUTE
9
7 8
rev. 113016 | VQE1A875Z

OPTIONS: Wired Sub or Wireless Sub (PW Soundbar ONLY)
Wired Sub
Press (Menu) on the Remote or the soundbar’s touch display.
Press (Scroll Down) to scroll down to Subwoofer submenu.
Press (Scroll Right) or (Select) to select the Subwoofer submenu.
Press (Scroll Down) to scroll down to the desired option, either: No Sub, Wired Sub or
Wireless Sub. Press (Scroll Right) or (Select) to select Wired Sub.
If the selection was successful the soundbar’s display will indicate Saved.
Wireless Sub (PW Soundbar ONLY)
Connect a RCA cable from the subwoofer wireless receiver to your subwoofer and plug the
receiver in the wall outlet. The LED on the front panel of the PW Soundbar will blink continuously.
Once Synced, the LED will become Solid illumination.
Press (Menu) on the Remote or the soundbar’s touch display.
Press (Scroll Down) to scroll down to Subwoofer submenu.
Press (Scroll Right) or (Select) to select the Subwoofer submenu.
Press (Scroll Down) to scroll down to Wireless Sub.
Press (Scroll Right) or (Select) to select Wireless Sub.
Press (Scroll Right) or (Select) to select Sync Subwoofer.
Press (Scroll Right)or (Select) to select
Push and Hold Button.
Now Push & Hold the Sync button on the rear of the subwoofer receiver.
If the selection was successful the soundbar’s display will
indicate Synced.If the option was not successful the soundbar’s
display will indicate Failed.
SUBWOOFER STATUS:
Factory Default = No Sub
Configures how the soundbar handles the bass information.
NOTE! Your soundbar is designed to work with one subwoofer when
wired or wirelessly connected to a subwoofer. If multiple subwoofers are
desired, an RCA Y-Splitter cable can be used with either installation.
subwoofer
wireless
receiver
subwoofer
wireless
receiver
subwoofer
wireless
receiver
Acoustics: Bass Level / Surrounds / Stereo Mode / Bass Mode
Connections Installation
OPTIONS: Increase or
decrease dB
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Bass Level. Press (Scroll Right) or
(Select) to select the Bass Level submenu.
To increase the Bass Output press (Volume
Up). To decrease Bass Output press (Volume
Down) . When the desired level is achieved,
press (Scroll Right) or (Select) to select
the desired level
If your selection was successful the soundbar’s
display will indicate Saved.
OPTIONS: Off
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Surrounds. Press (Scroll Right) or
(Select) to select the Surrounds submenu.
Press (Scroll Down) to scroll down to Off.
Press (Scroll Right) or (Select) to select
Off.
If the selection was successful, the soundbar’s
display will indicate Saved
If more output is required a +6dB option can
be enabled:
From the Surrounds submenu press the or
enter the Surrounds submenu
Press (Scroll Down) to scroll down to +6dB.
Press (Scroll Right) or (Select) to select
+6dB.
If the selection was successful the display will
indicate Saved.
OPTIONS: Stereo Mode, Voice
+ or Wide
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to Stereo
Mode. Press (Scroll Right) or (Select) to
select the Stereo Mode submenu.
Press (Scroll Down) to scroll down to the
desired option, either (Normal – default), Voice
+or Wide. Once the desired option is displayed,
press (Scroll Right) or (Select) to select
Normal,Voice + or Wide.
If the selection was successful, the soundbar’s
display will indicate Saved.
OPTIONS:
Bass Mode + or Night
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to Bass
Mode. Press (Scroll Right) or (Select) to
select the Bass Mode submenu.
Press (Volume Down) to scroll down to
the desired option, either (Normal – default),
Bass + or Night. Once the desired option is
displayed, press (Scroll Right) or (Select)
to select Normal, Bass + or Night.
If the selection was successful, the soundbar’s
display will indicate Saved.
Shelf Mount (Default)
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Installation. Press (Scroll Right) or
(Select) to select the Installation submenu.
Press (Scroll Down) to scroll down to
Shelf Mount. Press (Scroll Right)
or (Select) to select Shelf Mount.
If your selection was successful the
soundbar’s display will indicate Saved.
Wall Mount – Below TV
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Installation. Press (Scroll Right) or
(Select) to select the Installation submenu.
Press (Scroll Down) to scroll down to
Wall Mount. Press (Scroll Right)
or (Select) to select Wall Mount.
For a Below TV soundbar installation,
press (Scroll Down) to scroll down to
Below TV. Press (Scroll Right) or
(Select) to select Below TV.
If your selection was successful the
soundbar’s display will indicate Saved.
Wall Mount – Above TV
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Installation. Press (Scroll Right) or
(Select) to select the Installation submenu.
Press (Scroll Down) to scroll down to
Wall Mount. Press (Scroll Right)
or (Select) to select Wall Mount.
For an Above TV soundbar installation,
press (Scroll Down) to scroll down to
Above TV. Press (Scroll Right) or
(Select) to select Above TV.
If your selection was successful the
soundbar’s display will indicate Saved.
BASS LEVEL:
Factory default = 0dB
Configures the bass level from +/-10dB, in
2dB increments.
SURROUNDS:
Factory Default = ON
Configures the soundbar to output
simulated surround sound information
with a multi channel signal.
STEREO MODE:
Factory Default = Normal
Configures how the soundbar will
reproduce 2ch audio signals.
BASS MODE:
Factory Default = Normal
Adjusts the intensity of the bass signal
from Night mode to Bass+.
HDMI Settings: HDMI ARC / HDMI CEC / HDMI Bypass / Lip Sync (PW Soundbar ONLY)
To enable HDMI ARC:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
HDMI. Press (Scroll Right) or (Select)
to select HDMI submenu.
Press (Volume Down) to scroll down to the
HDMI ARC submenu.
Press (Scroll Right) or (Select) to select
HDMI ARC submenu.
Press (Volume Down) to scroll down to the
desired option, either (Off – default) or ON.
Once the desired option is displayed, press
(Scroll Right) or (Select) to select Off
or ON.
If the selection was successful the soundbar’s
display will indicate Saved.
To enable HDMI CEC:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
HDMI. Press (Scroll Right) or (Select)
to select HDMI submenu.
Press (Volume Down) to scroll down to the
HDMI CEC submenu.
Press (Scroll Right) or (Select) to select
HDMI CEC submenu.
Press (Volume Down) to scroll down to the
desired option, either Off or ON.
Once the desired option is displayed use the
or select (Off – default) or ON
If the selection was successful the soundbar’s
display will indicate Saved.
To enable HDMI Bypass:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
HDMI. Press (Scroll Right) or (Select)
to select HDMI submenu.
Press (Volume Down) to scroll down to
HDMI Bypass.
Press (Scroll Right) or (Select) to select
HDMI Bypass submenu.
Press (Volume Down) to scroll down to the
desired option, either Off, Last, HDMI 1,
HDMI 2, or HDMI 3. Once the desired input
is displayed, press (Scroll Right) or
(Select) to select the input.
If the selection was successful the soundbar’s
display will indicate Saved.
To adjust HDMI Lip Sync:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
HDMI. Press (Scroll Right) or (Select)
to select HDMI submenu.
Press (Volume Down) to scroll down to
Lip Sync. Press (Scroll Right) or
(Select) to select Lip Sync submenu.
Press (Volume Down) to scroll down to
the desired input, either: HDMI 1, HDMI 2,
HDMI 3 or HDMI ARC. Once the desired input
is displayed, press (Scroll Right) or
(Select) to select the input.
Press (Volume Down) to scroll to the
desired adjustment level. Press (Scroll
Right) or (Select) to select the level.
If the selection was successful the soundbar’s
display will indicate Saved.
HDMI ARC: Factory Default = Off
Enables the HDMI cable connected
from the soundbar to the TV to transmit
audio from the TV back to the soundbar.
NOTE: The HDMI CEC option may also be
required depending on TV model.
HDMI CEC Consumer Electronics
Control: Factory Default = Off
Enables all compatible CEC devices to be
controlled using a single remote via the
HDMI connection. NOTE: The HDMI CEC
option may also be required for HDMI
ARC depending on TV model.
HDMI BYPASS: Factory Default = Off
Enables the soundbar to pass an audio/
video signal directly to the TV from the
connected devices when the soundbar is
in standby mode.
HDMI LIP SYNC: Factory Default: 0ms
Adjusts the delay of the HDMI audio
content to that of the video. This should
only be adjusted if the audio timing is
faster than that of the video. Timing can
be adjusted from 0ms to 300ms for each
HDMI input, in 5ms increments
Display Settings: Display / Touch Display
OPTIONS: Auto Bright, Auto Dim, Bright & Dim
Press (Menu) on the Remote or the soundbar’s touch display.
Press (Scroll Down) to scroll down to Display. Press (Scroll Right) or (Select) to select the
Display submenu.
Press (Scroll Down) to scroll down to the desired option, either (Auto Bright – default), Auto Dim,
Bright or Dim. Once the desired option is displayed, press (Scroll Right) or (Select) to select
Auto Bright, Auto Dim, Bright or Dim.
If the selection was successful, the soundbar’s display will indicate Saved.
OPTIONS: Auto Bright, Auto Dim, Off, Bright & Dim
Press (Menu) on the Remote or the soundbar’s touch display.
Press (Scroll Down) to scroll down to scroll down to Touch Display. Press (Scroll Right) or
(Select) to select the Touch Display submenu.
Press (Scroll Down) to scroll down to the desired option, either Auto Bright, Auto Dim, Off, Bright
or Dim. Once the desired option is displayed, press (Scroll Right) or (Select) to select Auto
Bright, Auto Dim, Off, Bright or Dim.
If the selection was successful, the soundbar’s display will indicate Saved.
OLED (Front) DISPLAY: Factory Default = Auto Bright
Configures the brightness and behavior of the front panel display.
TOUCH DISPLAY: Factory Default = Auto Bright
Configures the brightness and behavior of the touch panel display
5 64
1 2
Choose a location for
the Paradigm soundbar
Place the soundbar on a flat table surface.
Shelf Mount
ATTENTION: Refer to Owner’s Manual
for Wall-Mounting Instructions.
1
OR
A
Choose your connections option …
Wall Mount –
Below TV
B
ATTENTION: Refer to Owner’s Manual
for Wall-Mounting Instructions.
OR
Wall Mount –
Above TV
C
Connections
2
OR
Sub OutAnalog 1 In
Analog 2 In
Left
White
Left
White
Right
Red
Right
Red
Optical 1 In
Optical 2 In
HDMI 1 In HDMI 2 In
EthernetIR Out
IR Out
Factory Use Factory Use
Wi-Fi
Setup
Wi-Fi
Status LED
HDMI 3 InHDMI Out
With Audio Return Channel
Factory Use
Audio &
Video
Connections
Audio & Video
Connections
Audio
Connection
Audio
Connections
Only
OR
B
Multi-Channel Audio/Video Sources:
Blu-ray, DVD, Game Console,
Cable Box, Satellite Receiver, Etc.
Single RCA Cable
Sold Seperately
Digital Out
Audio
Connection
HDMI Out
TV
TV
Optical Cable
(Digital)
HDMI Cable
Sub OutAnalog 1 In
Analog 2 In
Left
White
Left
White
Right
Red
Right
Red
Optical 1 In
Optical 2 In
HDMI 1 In HDMI 2 In
EthernetIR Out
IR Out
Factory Use Factory Use
Wi-Fi
Setup
Wi-Fi
Status LED
HDMI 3 InHDMI Out
With Audio Return Channel
Factory Use
Choose an Audio
Connection:
A
Multi-Channel Audio/Video Sources:
Blu-ray, DVD, Game Console,
Cable Box, Satellite Receiver, Etc.
OROR
HDMI Out
TV
TV
HDMI Audio &
Video Connection
(Recommended).HDMI Audio &
Video Connection
(Recommended).
Optional Subwoofer
Use an analog RCA cable for a
wired subwoofer connection.
A wireless subwoofer connection
is available on the PW Soundbar.
Optional Subwoofer
Use an analog RCA cable for a
wired subwoofer connection.
A wireless subwoofer connection
is available on the PW Soundbar.
Single RCA Cable
Sold Seperately
Digital Out
Optical Cable
(Digital)
Analog Out
R
Analog Out
L
Dual RCA Cable
(Analog)
Connect your external components (cable box, dvd player, etc.) audio and video
connections to your to your TV. Connect your TV’s audio connections to your
Paradigm soundbar.
RECOMMENDED: Connect your external components (cable box, Blu-ray
player, dvd player, etc.) to your Paradigm soundbar using an HDMI cable.
Use another HDMI cable to connect from your soundbar’s HDMI Out to your TV.
For external components without HDMI, use an Optical or RCA cable for an
audio connection to your soundbar. Video connections can be made from
your external components to your TV using an Optical, RCA or Coaxial cable.
Choose a location for
the Paradigm soundbar
Place the soundbar on a flat table surface.
Shelf Mount
ATTENTION: Refer to Owner’s Manual
for Wall-Mounting Instructions.
1
OR
A
Choose your connections option …
Wall Mount –
Below TV
B
ATTENTION: Refer to Owner’s Manual
for Wall-Mounting Instructions.
OR
Wall Mount –
Above TV
C
Connections
2
OR
Sub OutAnalog 1 In
Analog 2 In
Left
White
Left
White
Right
Red
Right
Red
Optical 1 In
Optical 2 In
HDMI 1 In HDMI 2 In
EthernetIR Out
IR Out
Factory Use Factory Use
Wi-Fi
Setup
Wi-Fi
Status LED
HDMI 3 InHDMI Out
With Audio Return Channel
Factory Use
Audio &
Video
Connections
Audio & Video
Connections
Audio
Connection
Audio
Connections
Only
OR
B
Multi-Channel Audio/Video Sources:
Blu-ray, DVD, Game Console,
Cable Box, Satellite Receiver, Etc.
Single RCA Cable
Sold Seperately
Digital Out
Audio
Connection
HDMI Out
TV
TV
Optical Cable
(Digital)
HDMI Cable
Sub OutAnalog 1 In
Analog 2 In
Left
White
Left
White
Right
Red
Right
Red
Optical 1 In
Optical 2 In
HDMI 1 In HDMI 2 In
EthernetIR Out
IR Out
Factory Use Factory Use
Wi-Fi
Setup
Wi-Fi
Status LED
HDMI 3 InHDMI Out
With Audio Return Channel
Factory Use
Choose an Audio
Connection:
A
Multi-Channel Audio/Video Sources:
Blu-ray, DVD, Game Console,
Cable Box, Satellite Receiver, Etc.
OROR
HDMI Out
TV
TV
HDMI Audio &
Video Connection
(Recommended).HDMI Audio &
Video Connection
(Recommended).
Optional Subwoofer
Use an analog RCA cable for a
wired subwoofer connection.
A wireless subwoofer connection
is available on the PW Soundbar.
Optional Subwoofer
Use an analog RCA cable for a
wired subwoofer connection.
A wireless subwoofer connection
is available on the PW Soundbar.
Single RCA Cable
Sold Seperately
Digital Out
Optical Cable
(Digital)
Analog Out
R
Analog Out
L
Dual RCA Cable
(Analog)
Connect your external components (cable box, dvd player, etc.) audio and video
connections to your to your TV. Connect your TV’s audio connections to your
Paradigm soundbar.
RECOMMENDED: Connect your external components (cable box, Blu-ray
player, dvd player, etc.) to your Paradigm soundbar using an HDMI cable.
Use another HDMI cable to connect from your soundbar’s HDMI Out to your TV.
For external components without HDMI, use an Optical or RCA cable for an
audio connection to your soundbar. Video connections can be made from
your external components to your TV using an Optical, RCA or Coaxial cable.
This option configures both the orientation of the soundbar’s display
as well as the soundbar‘s equalization and voicing, to make sure
you achieve the best sound for the set orientation.
The installation orientation options are as follows: Shelf Mount
(default), Wall Mount – Below TV, and Wall Mount – Above TV.
The default installation orientation setting is Shelf Mount.
Wireless SubWired SubNo Sub
(Factory Default)
Sync
SubOut Input:9V 250mA
IMPORTANT!
PW Soundbar rear
panel shown. HDMI
Connections and
Wi-Fi Setup are
only available on
the PW Soundbar.
IMPORTANT!
PW Soundbar rear
panel shown. HDMI
Connections and
Wi-Fi Setup are
only available on
the PW Soundbar.
3Subwoofer