PWSAP 20-Li D4 GB│CY │ 1 ■
Contents
Introduction............................................................2
Intended use........................................................................2
Features ...........................................................................2
Package contents ....................................................................3
Technical details.....................................................................3
General power toolsafety warnings .......................................4
1. Work area safety ..................................................................4
2.Electricalsafety...................................................................4
3. Personal safety....................................................................4
4. Power tool use and care ............................................................5
5. Use and handling of the cordless electrical power tool.....................................5
6.Service..........................................................................5
Safety instructions for all applications ....................................................6
Kickback and corresponding safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Special safety instructions for grinding and abrasive cutting ...................................8
Additional special safety instructions for abrasive cutting .....................................8
Safety guidelines for battery chargers ....................................................9
Storage and handling of the recommended accessory tools...................................9
Working procedures..................................................................9
Before use ............................................................10
Charging the battery pack (see fig. A)...................................................10
Attaching/disconnecting the battery pack to/from the tool...................................11
Checking the battery charge level ......................................................11
Fitting the protective cover for cutting....................................................11
Adjusting the blade guard ............................................................11
Fitting the additional handle...........................................................11
Fitting/changing the roughing/cutting disc ...............................................12
Starting the device .....................................................13
Switching on/off....................................................................13
Setting the rotational speed ...........................................................13
Maintenance and cleaning...............................................13
Disposal..............................................................14
Kompernass Handels GmbH warranty ....................................15
Service...............................................................16
Importer .............................................................16
Original declaration of conformity ........................................17
Ordering a replacement battery..........................................18
Telephone ordering .................................................................18
