Parkside PNTS 1400 E2 User manual

WET AND DRY VACUUM CLEANER
PNTS 1400 E2
IAN 275394
SAUSO IR ŠLAPIO VALYMO
SIURBLYS
Originalios naudojimo instrukcijos vertimas
NASS- UND TROCKENSAUGER
Originalbetriebsanleitung
WET AND DRY VACUUM CLEANER
Translation of the original instructions
ODKURZACZ DO PRACY NA
MOKRO I SUCHO
Tłumaczenie oryginalnej instrukcji obsługi
275394_par_Nass-Trockensauger_cover_PL_LT.indd 2 07.06.16 07:59

GB Translation of the original instructions Page 4
PL Tłumaczenie oryginalnej instrukcji obsługi Strona 17
LT Originalios naudojimo instrukcijos vertimas Puslapis 30 
DE / AT / CH Originalbetriebsanleitung Seite 44
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.
Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi
funkcjami urządzenia.
Prieš skaitydami išlankstykite lapą su paveikslėliais ir susipažinkite su visomis prietaiso funkcijomis.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
275394_par_Nass-Trockensauger_cover_PL_LT.indd 3 07.06.16 07:59

25
26
17
20
19
18
21
22
23
24
1 32 4 5 6
10
11
12
13
14
15
16
7
8
9

4
GB
Contents
Introduction .................................4
Application ..................................4
General description......................5
Delivery Contents.............................5
Overview........................................5
Description of operation....................6
Pictograms regarding the use of
nozzles and lters ............................6
Technical data..............................6
Safety information .......................7
Symbols used in the instructions .........7
General notes on safety ...................7
Assembly.................................. 9
Operation ....................................9
Switching on/off..............................9
Dry vacuuming ................................9
Wet vacuuming .............................10
Blow Function ................................11
Cleaning/Maintenance ...............11
Cleaning the device .......................11
Maintenance .................................11
Storage......................................11
Spare Parts/Accessories .............12
Disposal/Environmental
protection ..................................13
Trouble shooting ........................14
Guarantee .................................15
Repair Service............................16
Service-Center............................16
Importer ....................................16
Translation of the original EC
declaration of conformity...........59
Exploded Drawing .....................61
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a nal inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specied.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Application
The appliance is intended for domestic wet
and dry vacuuming in, for example, the
house, work room, car or garage.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate the
guarantee.
Vacuuming of ammable or explosive
materials or those which endanger health
is prohibited. The manufacturer will not be
held responsible for injuries resulting from
use which does not comply with the direc-
tions, or from incorrect use.

5
GB
General description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Delivery Contents
Unpack the equipment and check that it is
complete.
The equipment is supplied with the motor
head on (see 3). To take off the motor
head and remove the accessories, release
the locking lever ( 14).
-
Motor housing
- Stainless steel container
- Bow handle
-
Carry handle
- 4 steering castors with accessory
holders
- Telescopic suction pipe
- Suction hose
- Handle with air regulation
- Foam lter
- Fluted lter with lter cover
(already mounted)
- Paper lter bag
- Switchable household nozzle
- Crevice nozzle
- 8 cross-head screws
- Instruction Manual
Dispose of the packaging material in a
proper manner.
Overview
Housing
1 Bow handle
2 Bow handle tie bars
3 Motor housing
4 Carry handle
5 Mains lead
6 On/off switch
7 4 accessory holders at motor
housing
8 Suction connection
9 Stainless steel container
10 Drainage outlet
11 4 steering castors
12 Anti-static chain
13 4 accessory holders at steering
castors
14 Locking lever
15 Blow connection
16 2 cable mounts in the handle
Accessories
17 Telescopic suction pipe
18 Vacuum tube holder
19 Suction hose
20 Handle with air regulation
Filter
21 Foam lter for wet vacuuming
22 F
ilter cover
23 Fluted lter for dry vacuuming
24 Paper lter bag for vacuuming
both large dirt particles
Nozzles
25 Switchable household nozzle
for vacuuming carpets
for vacuuming smooth surfaces
26 Crevice nozzle
27 Filter basket

6
GB
Description of operation
The equipment is tted with a stable stain-
less steel container to hold liquid and dust.
The steering castors allow for maximum
mobility of the device. For wet vacuuming,
the suction airow is switched off by a oat
when the stainless steel container is full. The
equipment also has a blow function.
To prevent electrostatic charging during
vacuuming, an anti-static chain is tted on
the bottom of the equipment.
The following describes the function of the
operating parts.
Pictograms regarding the
use of nozzles and lters
Nozzle to vacuum carpets.
Nozzle to vacuum smooth surfaces
and hard oor surfaces.
Nozzle to vacuum dust and dirt
from joints and cracks.
Specic nozzle to vacuum cushions
and mattresses.
Specic nozzle to clean the car.
Filter to absorb liquids.
Filter not suitable to absorb liquids.
Filter to absorb dry dirt from the
house, garage and workshop.
Filter to absorb ne dust e.g. stone
dust or wood dust.
Technical data
Rated voltage ......220-240 V~, 50/60 Hz
Rated power input
(Power consumption)...................1400 W
Cable length.....................................4 m
Safety class ...................................... II
Protection category...........................IPX4
Suction force .............17 kPA, (170 mbar)
Stainless steel container capacity
(gross) ................................ approx. 23 l
useful volume....................... approx. 15 l
Weight (incl. all accessories)..
approx. 6.3 kg
Technical and visual modications may
be carried out due to further development
without prior notice. All dimensions, infor-
mation and statements provided in these
Operating Instructions are therefore subject
to amendment. Legal claims which are
based on the Operating Instructions can
therefore not be recognised.

7
GB
Safety information
• This device can be used by chil-
dren aged 8 and over and by
people with reduced physical,
sensory or mental capacities
or with a lack of experience or
knowledge, if they are super-
vised or have been instructed
regarding safe use of the de-
vice and understand the result-
ing risks. Children are not per-
mitted to play with the device.
Cleaning and user maintenance
are not to be undertaken by
children without supervision.
Symbols used in the
instructions
Hazard symbols with
information on preven-
tion of personal injury
and property damage.
Precaution symbol with in-
formation on prevention of
harm / damage.
Notice symbol with informa-
tion on how to handle the
device properly.
General notes on safety
Caution! When using electri-
cal machines, observe the
following basic safety meas-
ures for the prevention of
electric shocks and the risk of
injury and re:
To avoid accidents and injuries:
• Never leave a machine which
is ready for operation unat-
tended at the workplace.
•People and animals must not be
vacuumed with the machine.
• Do not aim the suction hose
and nozzle at yourself or oth-
ers during use, particularly not
at the eyes and ears; there is a
risk of injury.
• Do not vacuum any hot, incan-
descent, ammable, explosive
materials, or those which en-
danger health. This includes hot
ashes, petrol, solvents, acids
or caustic solutions. Personal
injury could occur.
• Nozzles and suction tubes must
not reach head level whilst in
use. Personal injury could oc-
cur.
To avoid accidents and injuries
from electric shocks:
• Ensure that the mains cable is
not damaged by being pulled
over sharp edges, by jamming,

8
GB
or by pulling on the cable.
• Before each use, check the
power supply lead and the ex-
tension cable for damage and
ageing. Do not use the equip-
ment if the cable is damaged or
worn. Danger of electric shock
hazard.
• If the power cable for this
equipment is damaged, it must
be replaced by the manufac-
turer, a customer service agent
of the same or a similarly quali-
ed person in order to prevent
hazards.
• Switch the machine off and pull
the plug under the following cir-
cumstances:
-when you are not using the
device,
- transporting it or leaving it
unattended;
- when you are checking the
device, cleaning it or remov-
ing blockages;
- when you are carrying out
cleaning or maintenance
work or replacing accesso-
ries;
- when the power or extension
cable is damaged; after con-
tact with foreign bodies or in
case of abnormal vibration.
• Never use the mains lead to
pull the plug out of the socket
or to pull the appliance. Protect
the mains lead from heat, oil
and sharp edges.
• Make sure that the mains volt-
age corresponds with the infor-
mation on the rating plate.
•Only plug the appliance into a
socket which is safeguarded by
at least 16A.
• The device must only be con-
nected to a mains socket via a
residual-current circuit breaker
(RCD) with a rated leakage cur-
rent of not more than 30mA.
The following states how damage
to the appliance and possible injury
to people can be avoided:
• Ensure that the machine is cor-
rectly assembled and the lters
are in the correct position.
• Do not use without the lter. This
could damage the machine.
• Only use Spare parts and ac-
cessories delivered and recom-
mended by our Service Centre
(see “Spare parts/Accessories”).
The use of parts by other manu-
facturers immediately renders
the guarantee void.
• Only have repairs carried out at
our authorised customer service
points.
• Observe the instructions for
cleaning and maintenance of
the machine.
• Store the appliance in a dry
place and out of reach of chil-
dren.

9
GB
Assembly
Pull out the mains plug.
Danger of electric shock.
The appliance is supplied with the
folded lter ( 23) tted.
1. Place the 4 steering castors (11) onto
the mounts on the stainless steel con-
tainer (9). Attach each steering castor
with a crosshead bolt (11a).
2. Push the bow handle (1) onto the two
bow handle tie bars (2) and screw it in
place with 2 crosshead bolts (1a).
3. Place the motor head (3) on the stain-
less steel container (9).
4. Close the stainless steel container by
folding up the bow handle and xing
it with the locking levers (14). everal
positions are possible for the bow han-
dle.
The locking lever must be tightened so
that a tensioning with medium force
can be carried out. You can set the ten-
sion by turning the locking lever:
- Tighten: turn clockwise.
- Loosen: turn anti-clockwise.
5. Place the carrying handle (4) on the
motor head (3) and screw it on tight
with 2 crosshead screws (4a).
6. Fit the accessories:
- Connect the suction hose (19).
- Fit the handle (20)
- Fit the telescopic suction pipe (17).
(Press the knob on the telescopic suc-
tion pipe in the direction and
separate to the desired length).
- Fit the desired nozzle (25/26).
Never vacuum without a lter!
To store the suction set during
breaks, push together the telescopic
suction hose (17) and plug the suc-
tion pipe holder (18) into the socket
on the motor housing (see picture
below).
Operation
Fully unwind the suction hose (
19) before commencing work.
Switching on/off
Connect the mains plug.
Do not vacuum without a lter!
How to insert the lter is described
in the chapters “dry vacuuming“
and “wet vacuuming“.
Switching On:
On/Off Switch ( 6) In position “I“.
Switching Off:
On/Off Switch ( 6) In position “0”.
Dry vacuuming
The appliance is supplied with the
folded lter (23) tted.
Vacuuming with a uted lter:
1. For dry vacuuming, t the uted lter
(23) onto the lter basket (27) on the
motor head (3). The sealing lip that
curves upward must point away from
the motor head.
2. Fit the lter cover (22) and lock it with
a light turn:
Lock the lter cover
Unlock the lter cover

10
GB
Vacuuming with the paper lter
bag:
To avoid the uted lter becoming
clogged, we recommend the addi-
tional use of the brown paper lter
bag.
1. Fit the uted lter (23).
2. Fold the side aps on the paper lter
bag (24) down on the perforation.
3. Completely unfold the paper lter bag
(24) and pull it over the internal suc-
tion nozzle (8) in the stainless steel
container (9). The connector on the
suction nozzle must be completely en-
closed by the sealing ring on the lter
bag opening.
A ne dirt lter bag made of micro
lter eece is also optionally avail-
able, which can be used in place
of the included paper lter bag (see
“Spare parts/Accessories”).
Vacuuming with the dry lter
(fabric lter bag, optionally
available):
The anti-tear fabric lter bag, which is
optionally available (see “Spare parts/Ac-
cessories”), is suitable for vacuuming large
dirt particles.
1. Place the foam lter ( 21) on the lter
basket ( 27) (see “Wet Vacuuming”).
2. Pull the fabric lter bag over the lter
basket.
Vacuuming ne dust:
Specic suction processes (e.g. grinding
of paints and lacquers, milling or drilling
walls, grinding or drilling hard wood) can
pose a risk from hazardous dust.
We recommend using the following option-
al lter combination, which is available,
for ne dust (see “Spare parts/Accesso-
ries”):
1. Fluted lter (23).
2. Fine dust lter bag made of eece
(optionally available see “Replacement
parts/Accessories”), which is used in
stead of the paper lter bag (24) in-
cluded in the scope of delivery.
Wet vacuuming
1. For wet vacuuming or to vacuum wa-
ter, t the foam lter (21) to the lter
basket (27) on the motor head (3).
To avoid tearing the foam lter (21):
- Use only a dry lter;
- Before inserting, twist the edge of
the lter slightly and then roll it back.
2. Suctioning up (draining) water: place
the suction hose ( 19) on the handle
(20) into the water tank and suc-
tion up the water.
3. Empty the stainless steel container
immediately after suction cleaning be-
cause it is not designed to store liquids
(see „Cleaning/Maintenance“).
Never reach into the water to
be suctioned up. Danger of
electric shock.
When the container ( 9) is full, the
suction opening is shut off by a oat,
and suction is then cut off. Switch the
appliance off, remove the plug from
the socket and empty the container
(see “Cleaning/Maintenance”).

11
GB
If foam or liquid exits, switch off the
machine immediately.
Blow Function
Operation without the use of a lter
is recommended.
• Connect the suction hose (19) to the
connecting blower (15) on the motor
head (3).
Cleaning/Maintenance
Pull out the mains plug.
Danger of electric shock.
Always check the appliance before
use for any obvious faults such as
a defective mains cable, and have
these repaired or replaced.
Cleaning the device
Never hose the device down with
water. Never use aggressive clean-
ing agents or solvents. This could
damage the appliance.
• After use, empty the
stainless steel con-
tainer
(9):
- Opening the drain plug to allow the
vacuumed liquid to drain out (
10). A liquid residue remains in the
container.
To remove all residual liquids, fold
down the bow handle (1) and
take off the motor head ( 3): x
the bow handle with the locking
levers (14), hold the stainless steel
container (9) with one hand on the
bow handle and the other on the
bottom of the container and pour
out the residual liquid.
• Clean the waste tank with a damp
cloth.
• Wash the foam lter ( 21) with luke-
warm water and soap, and allow to
dry.
• Beat the dust out of the uted lter
(23) and clean it with a paint brush
or hand brush.
• Replace the paper lter bag ( 24)
when full (see “Spare parts/Accesso-
ries” for reordering)
• Knock the optional dry lter (fabric
bag) out. Where necessary, wash with
lukewarm water and soap, and allow to
dry.
Maintenance
• The equipment is maintenance free.
Storage
1. Wind the mains lead (5) around
the handle (4).
2. Wind the suction hose (19)
around the handle (4).
3. The accessory holders (7/13)
are used to store the telescopic
suction pipe (17) and the nozz-
les (25/26).
4. Store the appliance in a dry
place and out of reach of chil-
dren.

12
GB
Spare Parts/Accessories
Spare parts and accessories can be obtained at
www.grizzly-service.eu
If you do not have internet access, please contact the Service Centre via telephone (see
“Service-Center” Page 16). Please have the order number mentioned below ready.
Position Position Description Use Order No.
instruction exploded
manual drawing
1 5 Bow handle 91104182
2/14 6 Bow handle tie bar + locking lever, right R 91104183
7 Bow handle tie bar + locking lever, left L 91104184
3/4 1/2 Motor housing + carry handle 91104180
9 8 Stainless steel container 91104185
10 9 Drainage outlet 91104186
11 12 4 steering castors 91096431
12 11 Anti-static chain 91092034
17 20 Telescopic suction pipe 91104187
19 21 Suction hose 91092025
20 15 Handle with air regulation 72800038
21 16 Foam lter, pack of 3 30250100
23/22 17/18 Fluted lter with lter cover 91092030
24 19 Paper lter bags, 30 l, pack of 5 30250133
25 13 Switchable household nozzle 72800214
26 14 Crevice nozzle 91099005

13
GB
Optionally available:
Description Design Use Product No.
Fluted lter without
lter cover With steel inner mesh 91099009
Fine dirt lter bag
30l, pack of 5 2-layer micro lter eece, white 30250110
Dry lter Blue fabric bag, washable 30250135
Cushion nozzle 72800040
Car nozzle 91096445
Disposal/Environmental protection
Be environmentally friendly. Return the tool, accessories and packaging to a recycling
centre when you have nished with them.
Machines must not be disposed of with household refuse.
Take the machine to a recycling point. The waste plastic and metal parts can be separat-
ed, accurately graded and passed on for recycling. Contact our Service Centre for more
details. Defective units returned to us will be disposed of for free.

14
GB
Trouble shooting
Problem Possible cause Fault correction
Device does not start
Mains voltage is not
present
Check plug socket, cable,
line, plug and fuse, where
appropriate, repair through
electrical specialist
Defective on/off switch
(6)
Repair by Customer Care
Worn carbon brushes
Defective motor
Low or lack of suction
Hose system (19) or jets
(25/26) blocked Remove obstructions and
blockages
Suction pipe ( 17)
assembled incorrectly Assemble suction pipe correctly
Container ( 9) open Close container
Container ( 9) full Empty container
Filter ( 21/23/24) full
or clogged Empty, clean or replace lter
Float in the lter basket
(27) does not move Release oat
Float in the lter basket
(27) faulty Repair by Customer Care
Float does not switch
the appliance off
Float in the lter basket
(27) does not move Release oat
Float in the lter basket
(27) faulty Repair by Customer Care
Dust or dirt is blow out
of the device Filter ( 21/23/24) is not
or not correctly assembled Use missing lters or check the
correct position of the lter

15
GB
Guarantee
Dear Customer,
This equipment is provided with a 3-year
guarantee from the date of purchase.
In case of defects, you have statutory rights
against the seller of the product. These
statutory rights are not restricted by our
guarantee presented below.
Terms of Guarantee
The term of the guarantee begins on the
date of purchase. Please retain the original
receipt. This document is required as proof
of purchase.
If a material or manufacturing defect
occurs within three years of the date of
purchase of this product, we will repair or
replace – at our choice – the product for
you free of charge. This guarantee requires
the defective equipment and proof of pur-
chase to be presented within the three-year
period with a brief written description of
what constitutes the defect and when it oc-
curred.
If the defect is covered by our guarantee,
you will receive either the repaired product
or a new product. No new guarantee pe-
riod begins on repair or replacement of the
product.
Guarantee Period and Statutory
Claims for Defects
The guarantee period is not extended by
the guarantee service. This also applies for
replaced or repaired parts. Any damages
and defects already present at the time of
purchase must be reported immediately af-
ter unpacking. Repairs arising after expiry
of the guarantee period are chargeable.
Guarantee Cover
The equipment has been carefully pro-
duced in accordance with strict quality
guidelines and conscientiously checked
prior to delivery.
The guarantee applies for all material and
manufacturing defects. This guarantee
does not extend to cover product parts that
are subject to normal wear and may there-
fore be considered as wearing parts (e.g.
lters or attachments) or to cover damage
to breakable parts (e.g. switches).
This guarantee shall be invalid if the prod-
uct has been damaged, used incorrectly or
not maintained. Precise adherence to all of
the instructions specied in the operating
manual is required for proper use of the
product. Intended uses and actions against
which the operating manual advises or
warns must be categorically avoided.
The product is designed only for private
and not commercial use. The guarantee
will be invalidated in case of misuse or
improper handling, use of force, or inter-
ventions not undertaken by our authorised
service branch.
Processing in Case of Guarantee
To ensure efcient handling of your query,
please follow the directions below:
• Please have the receipt and identica-
tion number (IAN 275394) ready as
proof of purchase for all enquiries.
• Please nd the item number on the rat-
ing plate.
• Should functional errors or other de-
fects occur, please initially contact the
service department specied below by
telephone or by e-mail. You will then
receive further information on the pro-
cessing of your complaint.
• After consultation with our customer

16
GB
service, a product recorded as defec-
tive can be sent postage paid to the
service address communicated to you,
with the proof of purchase (receipt)
and specication of what constitutes
the defect and when it occurred. In or-
der to avoid acceptance problems and
additional costs, please be sure to use
only the address communicated to you.
Ensure that the consignment is not sent
carriage forward or by bulky goods,
express or other special freight. Please
send the equipment inc. all accessories
supplied at the time of purchase and
ensure adequate, safe transport pack-
aging.
Repair Service
For a charge, repairs not covered by the
guarantee can be carried out by our ser-
vice branch, which will be happy to issue
a cost estimate for you.
We can handle only equipment that has
been sent with adequate packaging and
postage.
Attention: Please send your equipment to
our service branch in clean condition and
with an indication of the defect.
Equipment sent carriage forward or by
bulky goods, express or other special
freight will not be accepted.
We will dispose of your defective devices
free of charge when you send them to us.
Service-Center
GB Service Great Britain
Tel.: [phone]
(£ 0.10/Min.)
E-Mail: [email protected]
IAN 275394
Importer
Please note that the following address is
not a service address. Please initially con-
tact the service centre specied above.
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
www.grizzly-service.eu

17
PL
Spis tresci
Wstęp ........................................17
Przeznaczenie............................ 17
Opis ogólny ...............................18
Zawartość opakowania ..................18
Przegląd .......................................18
Opis działania ..............................19
Oznaczenia graczne do
zastosowania dysz i ltrów .............19
Dane techniczne......................... 19
Zasady bezpieczeństwa.............20
Symbole zawarte w instrukcji ..........20
Ogólne zasady bezpieczeństwa ......20
Składanie ..................................22
Obsługa.....................................22
Włączanie i wyłączanie .................22
Odkurzanie na sucho .....................22
Odkurzanie na mokro .......................23
Funkcja dmuchania ........................24
Oczyszczanie/konserwacja ........24
Czyszczenie urządzenia .................24
Konserwacja .................................24
Przechowywanie .......................24
Części zamienne/Akcesoria........25
Utylizacja/Ochrona środowiska ..26
Poszukiwanie błędów................ 27
Gwarancja.................................28
Serwis naprawczy ..................... 29
Service-Center............................ 29
Importer .................................... 29
Tłumaczenie oryginalnej
deklaracji zgodności WE ..............60
Rysunek samorozwijający..........61
Wstęp
Gratulujemy zakupu nowego urządzenia.
Zdecydowali się Państwo na zakup warto-
ściowego produktu. Niniejsze urządzenie
sprawdzono w trakcie produkcji pod kątem
jakości, a także dokonano jego kontroli
ostatecznej. W ten sposób zapewniona
jest jego sprawność. Nie da się wykluczyć
tego, że w pojedynczych przypadkach w
urządzeniu lub przy nim wzgl. w wężach
mogą się znaleźć pozostałości wody lub
smaru. Nie jest to brakiem ani uszkodze-
niem, czy powodem do troski o urządze-
nie.
Instrukcja obsługi jest częścią skła-
dową produktu. Zawiera ona waż-
ne wskazówki dotyczące bezpie-
czeństwa, eksploatacji i utylizacji.
Przed rozpoczęciem użytkowania
produktu należy się zapoznać ze
wszystkimi wskazówkami dotyczą-
cymi obsługi i bezpieczeństwa.
Produkt należy użytkować tylko
zgodnie z opisem i podanym prze-
znaczeniem. Instrukcję należy prze-
chowywać starannie, a w przypad-
ku przekazania produktu osobom
trzecim należy dostarczyć nabywcy
kompletną dokumentację.
Przeznaczenie
Urządzenie jest przeznaczone do odkurza-
nia na sucho i na mokro np. w pomieszcze-
niach gospodarstwa domowego, warszta-
tach do majsterkowania, w samochodach
lub garażach.
To urządzenie nie jest przeznaczone do
zastosowania komercyjnego. W przypad-
ku użytkowania komercyjnego wygasają
prawa z tytułu gwarancji.

18
PL
Wciąganie odkurzaczem substancji pal-
nych, wybuchowych lub szkodliwych dla
zdrowia jest niedozwolone. Producent nie
odpowiada za szkody wywołane niezgod-
nym z przeznaczeniem stosowaniem lub
nieprawidłową obsługą urządzenia.
Opis ogólny
Ilustracje znajdują się na okładce
przedniej i tylnej.
Zawartość opakowania
Rozpakuj urządzenie i sprawdź, czy jest
ono kompletne.
Urządzenie jest dostarczane z założoną
głowicą silnikową (patrz 3).
Aby zdjąć głowicę silnika i wyjąć wypo-
sażenie, zwolnić dźwignie ustalające (
14).
- Obudowa silnika
- Zbiornik ze stali nierdzewnej
- Uchwyt kabłąkowy
- Uchwyt do przenoszenia
- 4 kółka + gniazda do przechowywania
wyposażenia
- Teleskopowa rura ssąca
- Wąż ssący
- Uchwyt z elementem regulacji strumie-
nia powietrza
- Filtr piankowy
- Filtr fałdowany + pokrywa ltra (już monto-
wane)
- Worek papierowy
- Regulowana końcówka domowa
- Końcówka do odkurzania szczelin
- 8 śruby z gniazdem krzyżowym
- Instrukcja obsługi
Prawidłowo posegreguj i usuń materiały
opakowania.
Przegląd
Obudowa
1 Uchwyt kabłąkowy
2 2 trzpienie uchwytu kabłąkowego
3 Obudowa silnika
4 Uchwyt do przenoszenia
5 Kabel sieciowy
6 Włącznik-wyłącznik
7 4 gniazda do przechowywania
wyposażenia (obudowa silnika)
8 Króciec ssący
9 Zbiornik ze stali nierdzewnej
10 Śruba spustowa
11 4 kółka
12 Łańcuch antystatyczny
14 Tylne kółko kierujące
13 4 gniazda do przechowywania
wyposażenia (kółka)
14 Dźwignia ustalająca
15 Króciec dmuchający
16 2 Uchwyty kablowe na uchwycie
do przenoszenia
Przystawki
17 Teleskopowa rura ssąca
18 Uchwyt rury ssącej
19 Wąż ssący
20 Uchwyt z elementem regulacji
strumienia powietrza
Filtr
21 Filtr piankowy do odkurzania na
mokro
22 Pokrywa ltra
23 Filtr fałdowany do odkurzania na
sucho
24 Worek z ltrem papierowym do
odkurzania dużych zanieczyszczeń
Dysze
25 Regulowana końcówka domowa
do odkurzania dywanów
do odkurzania gładkich
powierzchni
26 Końcówka do odkurzania szczelin
27 Kosz ltra

19
PL
Opis działania
Urządzenie jest wyposażone w stabilny po-
jemnik ze stali nierdzewnej do gromadze-
nia cieczy i kurzu. Kółka zapewniają dużą
zwrotność urządzenia. Przy odkurzaniu
na mokro strumień powietrza zasysanego
jest wyłączany przez specjalny pływak po
napełnieniu zbiornika ze stali nioerdzew-
nej. Poza tym urządzenie posiada funkcję
wydmuchiwania powietrza.
W celu zapobieżenia gromadzeniu się
ładunków elektrostatycznych podczas od-
kurzania, na spodniej stronie urządzenia
zamontowano łańcuch antystatyczny.
Funkcje elementów urządzenia są podane
w poniższym opisie.
Oznaczenia graczne do
zastosowania dysz i ltrów
Dysza do odkurzania dywanów.
Dysza do odkurzania gładkich po-
wierzchni i twardych podłóg.
Dysza do odkurzania kurzu i brudu
z fug i rowków.
Dysza specjalna do odkurzania
poduszek i materaców.
Dysza specjalna do czyszczenia
samochodu.
Filtr do wchłaniania płynów.
Filtr nie jest przeznaczony do
wchłaniania płynów.
Filtr do wchłaniania suchych zabru-
dzeń z gospodarstwa domowego,
garażu i warsztatu.
Filtr do wchłaniania drobnego pyłu,
np. pyłu kamiennego i drewnianego.
Dane techniczne
Napięcie sieciowe ...220-240 V~, 50/60 Hz
Moc pobierana silnika
(moc przyłączowa)...................... 1400 W
Długość kabla sieciowego..................4 m
Klasa zabezpieczenia ....................... II
Typ zabezpieczenia .........................IPX4
Siła ssania .................17 kPA (170 mbar)
Pojemność zbiornika (brutto)......... ok. 23 l
Użyteczna poj. pojemnika............ok. 15 l
Ciężar (wł. z wszystkimi
przystawkami).......................... ok. 6,3 kg
Zmiany techniczne i optyczne mogą być
dokonywane bez zapowiedzi w ramach
procedur rozwoju technicznego. Wszelkie
wymiary, wskazówki i dane tej instrukcji
obsługi są w związku z tym niewiążące.
W związku z tym wyklucza się wszelkie
roszczenia prawne zgłaszane na podsta-
wie tej instrukcji obsługi.

20
PL
Zasady bezpieczeństwa
Urządzenie to mogą obsługiwać
dzieci od 8 roku życia, a także oso-
by o zmniejszonych zdolnościach -
zycznych, zmysłowych czy umysło-
wych, czy też osoby dysponujące
niedostatecznym doświadczeniem
oraz wiedzą, pod warunkiem, że
praca odbywa się pod nadzorem
albo po instruktażu w zakresie
bezpiecznej eksploatacji urządze-
nia i ze zrozumieniem istniejących
zagrożeń. Dzieciom nie wolno
bawić się urządzeniem. Dzieciom
nie wolno bez nadzoru wykonywać
czyszczenia i konserwacji.
Symbole zawarte w
instrukcji
Znaki niebezpieczeństwa z
informacjami dot. zapobiega-
nia wypadkom.
Znaki nakazowe (wyjaśnienie
nakazu zamiast wykrzyknika)
z informacjami dot. zapobie-
gania wypadkom.
Wskazówki zawierające in-
formacje dot. lepszego użyt-
kowania urządzenia.
Ogólne zasady
bezpieczeństwa
Uwaga! Przy korzystaniu z
narzędzi elektrycznych na-
leży przestrzegać podanych
poniżej podstawowych środ-
ków bezpieczeństwa, zabez-
pieczających przed poraże-
niem prądem elektrycznym,
zranieniem i pożarem:
W ten sposób unikniesz wypadków
i zranień:
• Nigdy nie zostawiaj gotowego
do pracy urządzenia bez opieki
w miejscu pracy.
• Urządzeniem nie wolno odku-
rzać ludzi ani zwierząt.
• Przewodu ssącego ani dysz nie
kierować podczas pracy na sie-
bie ani na inne osoby, a w szcze-
gólności nie w kierunku oczu ani
uszu. Istnieje niebezpieczeństwo
zranienia.
• Nie wciągaj gorących, żarzą-
cych się, wybuchowych ani szko-
dliwych dla zdrowia substancji.
Do takich substancji zaliczają
się np. gorący popiół, benzyna,
rozpuszczalniki, kwasy i zasady.
Niebezpieczeństwo zranienia.
• Podczas pracy dysza i rura
ssąca nie mogą się znaleźć na
wysokości głowy. Niebezpie-
czeństwo zranienia.
W ten sposób unikniesz wypadków i
zranień wskutek porażenia prądem:
• Uważaj, by nie uszkodzić kabla
prądowego przez przeciąganie
go po ostrych krawędziach, za-
ciskanie między przedmiotami
lub mocne pociąganie.
• Przed każdym użyciem spraw-
dzaj, czy przewód sieciowy i
przedłużacz nie są uszkodzone i