Parmco T7-6S-3 User manual

Installation
and Operating
Instructions
As part of Parmco Appliances commitment to improving and updang product ranges,
we reserve the right to alter, change and update technical specicaons and appearance
aributes of all Parmco Appliances products. E&OE.
Models:
T7-6S-3
T7-9S-3
For your convenience, we recommend to attach the serial number label HERE.

Dear Valued Customer,
Thank you and congratulations on purchasing your new Parmco appliance.
All Parmco products are made to the highest quality and design standards. We are
sure you will enjoy your new appliance.
As a note, please read through these instructions carefully, as these will assist you
in gaining a complete understanding of the functions and features oered by your
appliance.
Please take special note of all detailed technical information and installation
instructions. It is essential that you only allow a qualied technician to install this
appliance to ensure the safety and reliability of this appliance.
Furthermore, not using appropiate personnel to install this appliance may aect any
future warranty claims lodged, so please check with Parmco Appliances before any
installation is carried out.
We hope you enjoy your new appliance. If you would like to nd out more about
this product or any other products in Parmco’s extensive range, visit us on the web
at www.parmco.co.nz.
Regards,
The Parmco Team

3
Thank you for purchasing this rangehood. Please read the instructions manual
carefully before you use the rangehood and retain the manual in a safe place for
future reference.
Any installation work must be carried out by a qualified electrician. Before you use
the rangehood, make sure that the voltage (V) and the frequency (Hz) indicated on
the rangehood are exactly the same as the voltage (V) and the frequency (Hz) in your
home.
Parmco will not bear any responsibility for any damages caused by inappropriate
installation and usage.
Functions and Features
The rangehood is made of high quality materials with a streamlined design
according to technical and physical engineering theory, coupled with a high end
and luxurious age aesthetic feeling.
The rangehood is equipped with a large power, low noise electric motor and
centrifugal fan. It produces strong suction, low noise, no stick grease filter and is
easy to clean.
The grease filter is easy to remove and clean, and simply wipe lightly to clean the
motor and other interior parts.
Schematic diagram

4
Installation
1. The rangehood should be placed at a distance of 65cm above an electric cooktop
or 75cm above a gas cooktop.
2. Cut a hole in the cupboard of 490x265mm for model T7-6S-3 and 715x265mm for
model T7-9S-3. Make sure there is a minimum 35mm gap between the cutout
edge and the cupboard edge.
3. Take down the filter and remove the four screws on the side panels of the
rangehood.
4. Fix the hood into the cabinet using the screws.
5. Fix the face panel into the body using the screws and reinsert the filter.
Changing the Light bulb
Remove the filter, unplug the wiring connector and take out the bulb by pushing
the light downwards.

5
How to use the Control Panel
1. Turn on the power and the buzzer will buzz five times, indicating the appliance is
turned on.
2. Press the "Low" button to run the motor at low speed. Press it again and the
motor will stop.
3. Press the "Mid" button to run the motor at medium speed. Press it again and the
motor will stop.
4. Press the "High" button to run the motor at high speed. Press it again and the
motor will stop.
5. Press the "Light" button to turn on the two lighting lamps. Press it again and the
lamps will turn off. With every press, the buzzer will buzz one time.
Maintenance
1. The rangehood and its filter mesh should be cleaned regularly in order to keep it
in good working condition. As the grease filters are made of metal, do not clean
the filters with detergents that will corrode metal products.
2. Clean the filters as below:
Method one:
Put the filter in 40⁰C-50⁰C hot water. Pour in some grease-loosening detergent,
soak it for about 2-3 minutes and then clean it with a soft brush. Do not brush too
hard to avoid damaging the filter.
Method two:
Put the filter into a dishwasher with detergent for cleaning. Set the temperature
at around 60⁰C. Be careful not to use detergents that are corrosive to metal
products, that is, most dishwasher powders.
3. To protect the main body from corrosion over time, the rangehood should be
cleaned with soapy hot water or non corrosive detergent once a week. Do not use
grinding detergent as it will damage the body.