Parrot FLYPAD User manual

TAKE OFF
QUICK START GUIDE
GUIDE D’UTILISATION RAPIDE
GUÍA DE UTILIZACIÓN RÁPIDA
SCHNELLSTART-ANLEITUNG
GUIDA DI RIFERIMENTO RAPIDO
BEKNOPTE GEBRUIKSHANDLEIDING
GUIA DE UTILIZAÇÃO RÁPIDA


English.......................................4
Français .................................. 16
Español................................... 28
Deutsch .................................. 40
Italiano ................................... 52
Nederlands............................. 63
Português............................... 74
................................. 85

4
PRESENTATION
OF THE PARROT FLYPAD
R2
R1
L2
L1
Smartphone
holder
attachment
TAKE OFF
On/Off button
Micro
USB port
Charge LED
TAKE OFF

5
ENGLISH
CHARGING THE BATTERY
1. Connect the micro USB cable to the Parrot
Flypad’s micro USB port.
2. Connect the USB port to a computer or a USB
power adapter.
>The charge LED turns red to indicate that
charging is in progress. Once charging is
complete, the LED turns green.
The charge time is approximately 2 hours. Once
charged, the Parrot Flypad has a battery life of
about 6 hours.
TAKE OFF

6
CONNECTING THE
PARROT FLYPAD TO
YOUR DRONE
1. Turn on your drone.
2. Press the Parrot Flypad’s ON/OFF button to
turn it on.
>The Parrot Flypad’s warning light flashes
green and then becomes a steady green
when the connection is established.
You are connected to the drone, and you can fly it.
ATTACHING THE
SMARTPHONE HOLDER
Before using the Parrot Flypad’s smartphone
holder, make sure your smartphone does not
exceed the following dimensions:
• Width: 78 mm.
• Thickness: 9.8 mm.

7
ENGLISH
1. Secure the smartphone holder’s tab in the Parrot
Flypad’s slot.
2. Screw on the holder.

8
3. Fit your smartphone in the holder.
PARROT 4:21 PM 22%
Builder nodesign
My flights
START
06 98%
CONFIGURING THE
PARROT FLYPAD’S
BUTTONS
DOWNLOAD THE FREEFLIGHT
MINI APPLICATION
Login to the App Store®or Google PlayTM and
download the free FreeFlight Mini application to
your smartphone or tablet.
PARROT
4:21 PM
22%
Builder nodesign
My flights
START
06
98%

9
ENGLISH
CONNECT YOUR SMARTPHONE
TO THE PARROT FLYPAD AND
THE PARROT DRONE
1. Make sure your Parrot Flypad is switched off.
2. Turn on your Parrot drone.
3. Place the Parrot drone on a flat surface with the
propellers up.
4. Wait until the warning lights on the Parrot drone
turn green.
5. On your smartphone, turn on the Bluetooth®
function and open the FreeFlight Mini
application.
>The list of available Parrot drones appears.
6. Select your Parrot drone.
>The application connects to the Parrot drone.
PARROT
4:21 PM
22%
Builder nodesign
My flights
START
06
98%

10
7. Turn on your Parrot Flypad.
>The Parrot Flypad’s warning light flashes green.
8. In the FreeFlight Mini application, press
9. Press to display the drop-down list.
10. Select your Parrot Flypad.
>The warning light on the Parrot Flypad turns
green: you are connected. You can configure
the buttons of the Parrot Flypad.
CONFIGURING THE BUTTONS
Before you start, make sure your smartphone is
connected to the Parrot Flypad and the Parrot
drone.
1. In the FreeFlight Mini application, press
>The list of functions associated with the
Parrot Flypad buttons appears.
B
A
Flip backward
Take picture
Air break
Landing
Fast settings
Flip
PARROT 4:21 PM 22%
MinicontrolerM
Fly Ace
?

11
ENGLISH
2. In the application, press the function you want
to change to select it.
3. On your Parrot Flypad, press the button you
want to assign the function to.
>The button and the function are associated.
To return to the default settings, press Reset.
TURNING OFF THE
PARROT FLYPAD
To turn off the Parrot Flypad, press and hold down
the On/Off button.

12
WARNING LIGHT
INDICATIONS
Steady green light
The Parrot Flypad
is connected to the
Parrot drone or your
smartphone.
Flashing green light The Parrot Flypad is
waiting for a connection.
Flashing red light
The Parrot Flypad is
waiting for a connection,
but its battery is low.
> Charge the Parrot
Flypad’s battery.
Steady red light
The Parrot Flypad is
connected to your
smartphone or your
Parrot drone, but its
battery is low.
> Charge your Parrot
Flypad’s battery.
Steady red light and
the Parrot Flypad is
vibrating
The Parrot Flypad is
connected to your
smartphone or your
Parrot drone, but the
Parrot drone’s battery is
low.
> Charge your Parrot
drone’s battery.

13
ENGLISH
GENERAL INFORMATION
PRECAUTIONS FOR USE AND MAINTENANCE
The Parrot Flypad is intended to fly the Parrot Mambo and the Parrot Swing and
is not suitable for children under 14 years of age.
Check the list of drones that are compatible with the Parrot Flypad in the Sup-
port section on www.parrot.com.
Only use accessories specified by Parrot Drones SAS.
If sand or dust gets into the Parrot Flypad, it may be irreparably damaged and
no longer function correctly.
Do not expose the Parrot Flypad to rain or sun for an extended period.
Do not use this device near liquids.
Risk of ingestion of small objects. The packaging is not part of the product and
must be discarded as a safety measure.
WARNING REGARDING PRIVACY AND RESPECT FOR IMAGES
OF PROPERTY
Recording and broadcasting an individual’s image without their permission may
constitute an invasion of privacy and you may be held liable. Ask permission
before filming people, especially if you intend to keep your recordings and/
or broadcast them. Do not broadcast degrading images which may affect an
individual’s reputation or dignity.
Recording and broadcasting the image of property without permission from
its owner and or any third party holding intellectual property rights on the pro-
perty may constitute a violation of the property’s image rights and you may be
held liable. Ask permission from its owner and/or any third party with ownership
rights.
WARRANTY
For the warranty conditions, please read the Terms and Conditions of sale of the
retailer where you purchased the Parrot Flypad.
HOW TO RECYCLE THIS PRODUCT
This symbol on the product or its documentation indicates that it must
not be disposed of with household waste. Uncontrolled waste disposal
may harm the environment or human health. Please separate your device
from other types of waste to recycle it responsibly. This will help to foster
the sustainable re-use of material resources. We invite you to contact your retai-
ler or inquire at your local town hall to find out where and how the Parrot Flypad
can be recycled.
CONFORMITY DECLARATION
PARROT DRONES, 174 quai de Jemmapes, 75010 Paris, France, hereby
declares that it is solely responsible for the compliance of the product
described in this user guide with technical standards, EN 301489-17
(v2.2.1), EN300328, EN71-1, EN71-2, EN62115, EN62321 (1-7), according
to the provisions of the R&TTE Directive 1999/5/EC and the General
Product Safety Directive 2001/95/EC, the ROHS Directive 2011/65/EU.
http://www.parrot.com/uk/ce/?parrot-flypad

14
DECLARATION OF CONFORMITY IN CANADA
This device complies with the Industry Canada RSS applicable to license-
exempt radio apparatus. Operation is permitted subject to the following two
conditions: (1) the device must not produce interference, and (2) the user of the
device must accept any radio interference encountered, even if the interference
is likely to compromise operations.
This category B digital device is compliant with the NMB-003 standard of
Canada.
FCC AND IC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules and Industry Canada
License-exempt RSS standard(s) Operation is subject to the following two
conditions: 1) This device may not cause harmful interference, and 2) This
device must accept any interference received, including interference that may
cause undesired operation. Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment. This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide a reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and uses in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, wich can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: 1) Reorient or relocate the receiving antenna, 2)
Increase the separation between the equipment and the receiver 3) Connect the
equipment into a an outlet on a circuit different from that to which the receiver
is connected 4) Consult the dealer or an experienced radio/TV technician for
help. This Class B digital apparatus complies with Canadian ICES-003.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC RF radiation exposure limits set for
an uncontrolled environment. This transmitters must not be co-located or
operating in conjunction with any other antenna or transmitter.
This equipment complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference, including interference that
may cause undesired operation.
CAUTION!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user authority to operate the equipment.
BATTERY
WARNING: Failure to follow all the instructions may result in serious injury, ir-
reparable damage to the battery and may cause a fire, smoke or explosion.

15
ENGLISH
Always check the battery’s condition before charging or using it. Replace the
battery if it has been dropped, or in case of odour, overheating, discoloura-
tion, deformation or leakage. Never use anything other than the approved LiPo
charger to charge the battery. Always use a balancing charger for LiPo cells
or a LiPo cell balancer. It is recommended that you do not to use any other
charger than the one provided with the product. Never trickle charge or charge
under 2.5 V per cell. The battery temperature must never exceed 60 °C (140 °F)
otherwise the battery could be damaged or ignite. Never charge on a flam-
mable surface, near flammable products or inside a vehicle (preferably place
the battery in a non-flammable and non-conductive container). Never leave the
battery unattended during the charging process. Never disassemble or mo-
dify the housing’s wiring, or puncture the cells. Always ensure that the charger
output voltage corresponds to the voltage of the battery. Do not short circuit
the batteries. Never expose the LiPo battery to moisture or direct sunlight, or
store it in a place where temperatures could exceed 60 °C (car in the sun, for
example). Always keep it out of reach of children. Improper battery use may
result in a fire, explosion or other hazard.
The battery terminals should not be allowed to short-circuit. The pro-
duct should be connected only to class II appliances which display
the symbol.
TRADEMARKS
Parrot Flypad, Parrot Swing as well as their respective logos are trademarks of
Parrot Drones SAS.
Parrot and the Parrot logos are trademarks of Parrot S.A.
App Store is a trademark of Apple Inc.
Google Play is a trademark of Google Inc.
The Bluetooth®name and logo are registered trademarks of Bluetooth SIG, Inc.
and any use of these trademarks by Parrot Drones SAS is done under licence.
All other trademarks mentioned in this guide are the property of their respec-
tive owners.
MANUFACTURER INFORMATION
The Parrot Flypad is manufactured by: PARROT DRONES SAS - 174 Quai de
Jemmapes - 75010 Paris (France) - Corporate and Trade Register Paris 808 408
074
www.parrot.com
FCC ID : 2AG6I-PF01BRC
IC ID : 21053-PARROT

16
PRÉSENTATION
DU PARROT FLYPAD
R2
R1
L2
L1
Fixations du
support pour
smartphone
TAKE OFF
Switch On/Off
Voyant lumineux
Prise
micro-
USB
LED de
charge
TAKE OFF

17
FRANÇAIS
CHARGER LA BATTERIE
1. Branchez le câble micro-USB (fourni) au port
micro-USB du Parrot Flypad.
2. Connectez le port USB à un ordinateur ou à un
adaptateur secteur USB (non fourni).
>La LED de charge est rouge pour indiquer
que la charge est en cours. Une fois la charge
terminée, la LED devient verte.
Le temps de charge est d’environ 2 heures quand
le Parrot Flypad est éteint. Une fois chargé, le
Parrot Flypad a une autonomie d’environ 6 heures.
TAKE OFF

18
CONNECTER LE PARROT
FLYPAD À UN DRONE
PARROT
1. Allumez votre drone Parrot
2. Appuyez sur le bouton On/Off du Parrot Flypad.
La connexion entre le drone Parrot et le Parrot
Flypad se fait automatiquement.
>Le voyant lumineux du Parrot Flypad cli-
gnote vert puis devient vert fixe une fois la
connexion établie.
Vous êtes connecté. Vous pouvez piloter votre
drone Parrot avec le Parrot Flypad.
FIXER LE SUPPORT
POUR SMARTPHONE
Avant d’utiliser le support pour smartphone du
Parrot Flypad, assurez-vous que votre smartphone
ne dépasse pas les dimensions suivantes :
• Largeur : 78 mm.
• Epaisseur : 9,8 mm.

19
FRANÇAIS
1. Fixez la languette du support pour smartphone
dans l’encoche du Parrot Flypad.
2. Vissez le support.

20
3. Installez votre smartphone dans le support.
PARROT 4:21 PM 22%
Builder nodesign
My flights
START
06 98%
CONFIGURER LES
BOUTONS DU
PARROT FLYPAD
TÉLÉCHARGER L’APPLICATION
FREEFLIGHT MINI
Connectez-vous sur l’App Store®ou sur
Google PlayTM et téléchargez l’application gratuite
FreeFlight Mini.
PARROT
4:21 PM
22%
Builder nodesign
My flights
START
06
98%