PARUS PMF-M10 User manual

QUICK GUIDE

GUARANTEE CERTIFICATE AND USER INSTRUCTIONS
Model: PMF-M10 Mini Farm
Thank you for choosing a PARUS Plant Light.
To ensure correct operation and performance this product has been
carefully inspected and tested.
Terms of guarantee:
Your Plant Light is covered by a two-year limited guarantee.
This guarantee applies from the date of purchase shown on your
receipt. In the event of a guarantee claim you should contact your
retailer where the product was purchased.
This guarantee does not apply if the lamp has been:
Connected to a dimmer
Connected to a supply with the wrong voltage
Used outside the recommended temperature range
Subjected to mechanical damage, e.g. dropped
Dismantled for troubleshooting or repair
Read the user instructions before you use this lamp.
Save the instructions for future reference.
Warning: Before you start using the light –read and follow these
instructions:
This lamp is not intended for outdoor use
Temperature range: -20°C ±40°C
Make sure your hands are dry before installing the lamp
The lamp must be well ventilated; it must not be installed in a
sealed enclosure
Do not look directly at the lamp when it is switched on
If you handle the transformer carelessly while connecting it you
could get an electric shock.
The shade of the lamp will get hot (35°C ±40°C) after a period of
use. This the normal operational temperature
If electrical installation work is required to install the lamp, this has
to be carried out by a qualified electrician
Do not use the lamp if; it does not light up; if it starts flashing; or if
it only produces weak illumination.
In the event of a defect, turn off the lamp immediately. Never
attempt to repair the lamp yourself as this could cause serious
damage and voids the guarantee.

1. Operation
A Plant Light consists of a light source (LED) that produces light in
wavelengths that are chosen to encourage plants to grow and thrive.
The Mini Farm has been developed to give your plants important
supplementary lighting in the right wavelengths to make your favorite
plants thrive and grow well.
2. Technical data
Model: PMF-M10
Voltage: 90~240 V 50/60 Hz (transformer)
Operating voltage of LED bulb: 24 V DC
Light spread: 60°
Power: 17 W
Includes: Timing and Dimming
Weight: 4.2kg
PPFD* (200 mm): 250 μmol
IP class: IP 54Lifetime: ≥ 30,000 hours
Light color: White
Frame: Black Aluminum
*PPFD is a measure of the useful photosynthetic radiation
3.Accessories / Options:
Hydroponic Grow Kit
4. Care and storage:
Store the lamp and packaging out of reach of children.
There are no user-serviceable parts inside the LED lamp.
Waste disposal: This lamp should be treated as electronic waste.
5. Assembly and installation
Screw the light frame and base together.
Use a Phillips-head screwdriver to secure the bottom to the bar
Connect the cable to the transformer
Plug the transformer into a wall socket.
Position the Mini Farm on a level surface

6. Positioning
Position the lamp in a suitable location indoors where the indoor
temperature is between 16 and 26°C. The ideal conditions for your
plant are a well-ventilated area with a temperature of 18–24°C and
humidity level of at least 50%.
7. Using the Timer / Dimmer
The M10/M20 has an integrated timer with 4 mode buttons and 2 light
adjustment buttons. The mode buttons have a LED that indicates the
selected operating mode.