Patching Panda PUNCH V3 User manual

DECAY
DECAY
PUNCH
ENVENV
DECAY
DECAY
IN
IN
ACC ACC
TRIG|CV
TRIG|CV TRIG|CV
TRIG|CV
ACC|VEL ACC|VEL
PUNCH
USER MANUAL

INTRODUCTION:
Punch is the ultimate VCA-DECAY module for Eurorack
– Specially designed to generate dynamic percussive sounds but also
capable of basslines, leads, envelopes and more. The VCA has a built
in voltage controlled Decay envelope that can be turned from smooth
to more aggressive exponential responses and can be activated with
triggers, gates or cv’s.
Punch features two modes per channel to play, with a dedicated switch
control: “vintage style drum machine mode” and “dynamic cv mode”
Punch is capable of creating AM sounds with control voltage on the “amount”
Each envelope can be inverted via dedicated switches on the front panel.
If you use an inverted envelope alongside the accent input you can create
ducking effects like side-chain compression..
INSTALLATION:
* Disconnect your synth from the power source.
* Double check polarity from the ribbon cable, unfortanetly if you damage
the module by powering in the wrong direction it will not be covered by
the warranty.
* After connecting the module check again you have connected the right
way, the red line should be on the -12V.

DECAY
DECAY
PUNCH
ENVENV
DECAY
DECAY
IN
IN
ACC ACC
TRIG|CV
TRIG|CV TRIG|CV
TRIG|CV
ACC|VEL ACC|VEL
3. CONTROLS:
Audio input channel 1.
Audio input channel 2.
Output chanel 1.
Output chanel 2.
Trigger/CV input channel 1.
Trigger/CV input channel 2.
Envelope output channel 1.
Envelope output channel 2.
Switch envelope from + to - channel 1.
Switch envelope from + to - channel 2.
Accent/vel input channel 1.
A
H
C
G
J
M
P
I
KL
N
O
QR
S
T
E
D
F
B
C
B
D
E
F
G
H
I
J
K
Accent input channel 2.
Accent/vel input channel 2.
Gain amount channel 1.
Gain amount channel 2.
Response curve channel 1.
Response curve channel 2.
Manual decay control channel 1.
Manual decay control channel 2.
CV decay channel 1.
L
N
M
O
P
Q
R
S
U V
A
TCV decay channel 2.
USwitch from “vintage style drum
machine mode” to “dynamic cv
mode” channel1.
VSwitch from “vintage style drum
machine mode” to “dynamic cv
mode” channel 2.
L

DECAY
DECAY
PUNCH
ENVENV
DECAY
DECAY
IN
IN
ACC ACC
TRIG|CV
TRIG|CV TRIG|CV
TRIG|CV
ACC|VEL ACC|VEL
Vintage drum machine mode
TRIG
INPUT
TRIG 1
TRIG 1
TRIG 2
TRIG 2
OUTPUT
ACC LVL

DECAY
DECAY
PUNCH
ENVENV
DECAY
DECAY
IN
IN
ACC ACC
TRIG|CV
TRIG|CV TRIG|CV
TRIG|CV
ACC|VEL ACC|VEL
CV dynamic mode
CV
INPUT
TRIG
TRIG
OUTPUT WITH DECAY AND CURVE BEFORE CV INPUT TO THE ACCENT
CV
CV ACC
OUTPUT

DECAY
DECAY
PUNCH
ENVENV
DECAY
DECAY
IN
IN
ACC ACC
TRIG|CV
TRIG|CV TRIG|CV
TRIG|CV
ACC|VEL ACC|VEL
AM sounds with control voltage
CV
CARRIER
MODULATOR
MODULATOR
CARRIER
AM
CV
MOD INDEX
AMOUNT OF AM
CV
AMOUNT OF AM