Patton electronics S-WTA User manual

T
he Patton®Residential Smart WiFi
Telephone Adapter (S-WTA) delivers
connectivity with cost savings for resi-
dential and SoHo users. It combines two
channels of standards-based VoIP with an
integrated broadband WiFi router.
The S-WTA offers dual two-wire FXS phone
ports for standard telephones or fax
machines. With softswitch-certified SIP sig-
naling, the S-WTA provides seamless toll-
quality access to lowest cost VoIP services.
The integrated broadband router enables you
to connect to any Ethernet-based WAN such
as ADSL, cable or fiber services.
The integrated 4-port 10/100 LAN switch easily
connects all of your networking devices.
The integrated 802.11 WiFi offers b, g
and Super G wireless connections auto-
matically for highest throughput and maxi-
mum compatibility.
Wireless WPA security
with NAT, firewall/ state-
full packet inspection and
denial-of-service support
helps keep your network
secure and your phone
bills low.
Visit www.patton.com for more information.
Take advantage of low-cost VoIP services without sacrificing existing Internet access and connectivity. The S-WTA offers dual chan-
nel VoIP, broadband routing and integrated WiFi for a complete residential TriplePlay Ready voice and data solution.
Smart Residential VoIP Analog
WiFi Telephone Adapter
Model S-WTA
VoIP
Triple Play Ready
Complete Triple Play multimedia and IPTV sup-
port with IGMP snooping and proxy. Integrated
QoS for ensured voice, data, and multimedia
quality.
Multiple Codecs
Toll quality and low-bandwidth CODECs.
T.38 and fax-bypass features for solid
multiuse interoperability.
Service Provider Solution
Single tightly integrated solution perfect for
provider-based competitive calling and bundled
data services.
Advanced Security
Integrated firewall/statefull inspection firewall,
denial-of-service protection and NAT/DMZ.
Wireless security offers WEP, WPA, WPA2, and
802.1x wireless security support.
SIP signaling
Deploy into any multimedia, interactive, or voice
network with softswitch certified and tested call
& session signaling.
Voice & Data Connectivity
2-call voice & fax FXS ports, 4-port LAN Ethernet
switch, 1-port WAN Ethernet and integrated
802.11g WiFi
Special Rates Available
Call for Details
Dual FXS analog ports
802.11 b/g WiFi
Four port switch
10/100 WAN Ethernet

07MSWTA-DS2
S-WTA/EUI: 2-Port FXS VoIP Telephony Adapter with Broadband Router and
Integrated 802.11b/g WiFi; 100–240 VAC external power supply
Ordering Information
Remote Office/Branch Office Voice Extension and Access diagram
Specifications
Voice Connectivity
Two FXS 2-wire loopstart, RJ-11 • 5 REN
• EuroPOTS (ETSI EG201 188) •
Programmable AC impedance, feeding, &
ring voltage; on-hook voltage 50Vrms
nominal • Caller-ID Type-1/2 FSK and ITU
V.23/Bell 202 generation.
Voice codes
G.711 A-Law/µ-Law (64kbps)
Voice Processing
G.726 ADPCM; G.723.1 (5.3 or 6.3
kbps); G.729abe • G.168 echo cancella-
tion • SIPv2 • DTMF detection & genera-
tion • Carrier tone detection & genera-
tion • Silence suppression & comfort
noise • Configurable dejitter buffer •
Configurable tones (dial, ringing, busy) •
Configurable transmit packet length •
RTP/RTCP (RFC 1889)
Fax and Modem Support
G.711 transparent fax • Fax over IP
(FoIP) • T.38 fax relay (9.6 k, 14.4 k)
IP Services
Complete IPv4 router; DHCP server,
PPPoE, NAT, DMZ with configurable SPI
firewall and DoS protection • DiffServe/ToS
set for queue per header bits • Pocket
policing discards excess traffic • 802.1p/Q
VLAN support with 4096 IDs •
AES/DES/3DES encryption options
Connectivity
WAN: Single 10/100 Ethernet RJ-45
LAN: Four RJ-45 switch ports
Integrated WiFi: Dual diversity antenna.
LAN switched with full country channel
selection (US, Canada, Japan, Euro) at
2.4Ghz; autorate .speed from 1–54 Mbps
with Super-G burst support to 108 Mbps.
Up to 23 dBm transmit power. Data rate
54 Mbps.
Voice Routing—Session Router
Local switching; Interface huntgroups •
Routing criteria
Management
HTTP/CLI with local console and remote
Telnet/SSH access • TFTP configuration
& firmware loading • SNMP v1 agent
(MIB II and private MIB) • Built-in diag-
nostic tools (trace, debug)
Operating Temperature
32–104°F (0–40°C)
Humidity
5–80% (non condensing)
Power
100–240 VAC (50/60 Hz)
Power dissipation
4W
Compliance
EMC compliance: EN55022 and EN55024
• Safety compliance: EN 50950 • CE
compliance • FCC Part 15 Class A
Patton is a registered trademark of Patton
Electronics Company in the United States and
other countries.
Patton-Inalp Networks AG
Meriedweg 7
CH-3172 Niederwangen
Switzerland
Phone ++4411((3311))99885522552255
Fax ++4411((3311))99885522552266
E-mail ssaalleess@@iinnaallpp..ccoomm
Web wwwwww..iinnaallpp..ccoomm
Patton Electronics Co.
7622 Rickenbacker Drive
Gaithersburg, Maryland 20879
USA
Phone ++1133001199775511000000
Fax ++1
133001188669999229933
E-mail ssaalleess@@ppaattttoonn..ccoomm
Web wwwwww..ppaattttoonn..ccoomm
PE-Inalp Networks Private Ltd
Old No. 14 and New No.6,
Brahadambal Road,
Nungambakkam High Road
Chennai: 600 034, India
Phone ++991144444455449900339955//66//77
Fax ++9911444444554499..00339944
Email ssaalleess@@p
paattttoonn..ccoo..iinn
Web wwwwww..ppaattttoonn..ccoo..iinn
An Associate of
Electronics Co., USA