Patton electronics 2040 Series User manual

Patton Electronics Company • 7622 Rickenb
Phone: [phone] • Fax: [phone] • E-mail: sales
V
V.35/X.21/RS-530 to HSSI .35/X.21/RS-530 to HSSI
The Patton 2040 Series interface con-
verter allows a switch or router with a
HSSI interface (such as the Ascend GRF
IP Switch) to connect directly to a CSU,
bridge, router, multiplexer or other device
with a V.35, X.21 or RS-530 interface.
Supporting synchronous data rates up to
10 Mbps, the Patton 2040 Series is trans-
parent to protocol and passes all data
sig
cloc
cloc
loo
els
abl
DT
ext
with
The Patton 204
Patton 2040 Series
Interface Converter
T1 CSU
Integral 6
V.35 Port (X.21 &
RS-530 converters
also available)
Patton Electronics Company • 7622 Rickenbacker Dr. • Gaithersburg, MD • 20879
Phone: [phone] • Fax: [phone] • E-mail: [email protected] • WWW: http://www.patton.com
V
V.35/X.21/RS-530 to HSSI Interf .35/X.21/RS-530 to HSSI Interface Con ace Conv ver erter ter
The Patton 2040 Series interface con-
verter allows a switch or router with a
HSSI interface (such as the Ascend GRF
IP Switch) to connect directly to a CSU,
bridge, router, multiplexer or other device
with a V.35, X.21 or RS-530 interface.
Supporting synchronous data rates up to
10 Mbps, the Patton 2040 Series is trans-
parent to protocol and passes all data
signals, all control signals, and all HSSI
clocking paths (except smooth to gapped
clock). Both local line and remote line
loopbacks are supported. All three mod-
els in the Patton 2040 Series are avail-
able in two versions: DCE-to-DTE or
DTE-to-DCE. The Patton 2040 Series is
externally AC powered, and is supplied
with an integral 6ft (1.8 m) cable.
The Patton 2040 Series
Continued...
Ascend GRF IP Switch
Patton 2040 Series
Interface Converter
HSSI Port
T1 CSU
Integral 6 ft cable
V.35 Port (X.21 &
RS-530 converters
also available)

© Bi-Directional HSSI (High Speed Serial
Interface) Conversion
© Three Models to Choose From:
Patton 2040 - V.35 to HSSI
Patton 2041 - X.21 to HSSI (pictured)
Patton 2042 - RS-530 to HSSI
© Sup
up
© Tran
Con
© Integ
© Two
DT
© Exte
Data Format: Synchronous
Standards: Converts CCITT V.35, CCITT X.21 or
EIA-530 to HSSI (ANSI/TIA/EIA-613, December,
1993 & ANSI/TIA/EIA-613, November, 1993)
Data Rate: 0 - 10 Mbps
Clocking: All clocking modes supported except con-
version from smooth to gapped clock
Loopbacks: Local line and remote line supported;
Local DTE not available
Interfaces: V.35, X.21 or RS-530 DTE to HSSI
DCE
(see
Connec
Male
DB-2
Cable:
Temper
Altitude
Humidi
Power
100-
Dimens
(12.4
Patto
5.08
7622 Rickenbacker Dr., Gaithersburg, MD 20879
Phone: [phone] • Fax: [phone] • E-mail: sales@p
O RDERING I NFO
O RDERING I NFO
2040MT-MC/UI (M/34 male, V.35 DTE configuration) to
Universal Input Power Supply (100 -
2040MC-MT/UI (M/34 male, V.35 DCE configuration) to
Universal Input Power Supply (100 -
2041FT-MC/UI (DB-15 female, X.21 DTE configuration
Universal Input Power Supply (100 -
2041FC-MT/UI (DB-15 female, X.21 DCE configuration
Universal Input Power Supply (100 -
2042MT-MC/UI (DB-25 male, RS-530 DTE configuratio
Universal Input Power Supply (100 -
2042MC-MT/UI (DB-25 male, RS-530 DCE configuratio
Universal Input Power Supply (100 -
S PECIFICATIONS
S PECIFICATIONS
Patton
V.35/X.
F EATURES
F EATURES
© Bi-Directional HSSI (High Speed Serial
Interface) Conversion
© Three Models to Choose From:
Patton 2040 - V.35 to HSSI
Patton 2041 - X.21 to HSSI (pictured)
Patton 2042 - RS-530 to HSSI
© Supports Synchronous Data Rates
up to 10 Mbps
© Transparent to Protocol–Passes Data,
Control Lines and Two Loopback Modes
© Integral 6 ft (1.8 m) Cable
© Two Versions: DCE-to-DTE and
DTE-to-DCE
© External AC Power Supply
Data Format: Synchronous
Standards: Converts CCITT V.35, CCITT X.21 or
EIA-530 to HSSI (ANSI/TIA/EIA-613, December,
1993 & ANSI/TIA/EIA-613, November, 1993)
Data Rate: 0 - 10 Mbps
Clocking: All clocking modes supported except con-
version from smooth to gapped clock
Loopbacks: Local line and remote line supported;
Local DTE not available
Interfaces: V.35, X.21 or RS-530 DTE to HSSI
DCE; V.35 X.21 or RS-530 DCE to HSSI DTE
(see ordering information)
Connectors: Male HD/Slimline 50-pin (HSSI);
Male M/34 (V.35), Female DB-15 (X.21) or Male
DB-25 (RS-530)
Cable: 6 ft (1.8 m)
Temperature Range: 32-122°F (0-50°C)
Altitude: 0-15,000 feet (4.5Km)
Humidity: Up to 95% non-condensing
Power Supply: External AC transformer,
100-240VAC (Universal Input), IEC-320 connector
Dimensions:
Patton 2040 - 4.90” x 2.00” x 0.73”
(12.45 cm x 5.08 cm x 1.85 cm);
Patton 2041 and
Patton 2042 - 3.40” x 2.00” x 0.73” (8.63 cm x
5.08 cm x 1.85 cm)
7622 Rickenbacker Dr., Gaithersburg, MD 20879
Phone: [phone] • Fax: [phone] • E-mail: [email protected] • WWW: http://www.patton.com
O RDERING I NFO
O RDERING I NFO
2040MT-MC/UI (M/34 male, V.35 DTE configuration) to (HD-50 male, HSSI DCE configuration),
Universal Input Power Supply (100 - 240VAC)
2040MC-MT/UI (M/34 male, V.35 DCE configuration) to (HD-50 male, HSSI DTE configuration),
Universal Input Power Supply (100 - 240VAC)
2041FT-MC/UI (DB-15 female, X.21 DTE configuration) to (HD-50 male, HSSI DCE configuration),
Universal Input Power Supply (100 - 240VAC)
2041FC-MT/UI (DB-15 female, X.21 DCE configuration) to (HD-50 male, HSSI DTE configuration),
Universal Input Power Supply (100 - 240VAC)
2042MT-MC/UI (DB-25 male, RS-530 DTE configuration) to (HD-50 male, HSSI DCE configuration),
Universal Input Power Supply (100 - 240VAC)
2042MC-MT/UI (DB-25 male, RS-530 DCE configuration) to (HD-50 male, HSSI DTE configuration),
Universal Input Power Supply (100 - 240VAC)
S PECIFICATIONS
S PECIFICATIONS
Patton 2040 Series
V.35/X.21/RS-530-to-HSSI Converters
F EATURES
F EATURES