Paul Mitchell Express Ion Dry+ D15NA Instruction Manual

INSTRUCTIONS, SAFETY AND WARRANTY GUIDE
Congratulations on the purchase of your Express Ion Dry®+ blow-dryer.
We hope you enjoy it for years to come!
• Please make sure to read this guide thoroughly before use.
• Please keep this guide in a handy place for quick reference.
KEY BENEFITS
Digital LCD screen– Heat, airow, and cool shot settings displayed.
Reduces drying time– Unique Express Ion Complex™dries hair gently
and quickly from the inside out, leaving hair hydrated, conditioned,
and frizz-free.
Easy styling– Smoothes and seals the cuticle, while gentle air ow
results in less tangles, yaways, and damage.
FEATURES
• Digital display shows heat and speed settings
• Easy-snap lter
• 5 temperatures/5 speed settings
• 1875 watts professional DC motor
• Ergonomic handle
• Express Ion Complex™helps hydrate and restore moisture
• Cool shot button
• Ionic styling nozzle and diffuser
• 9-foot professional cord with hanging loop
OPERATING INSTRUCTIONS
This dryer is intended for professional and consumer use. This dryer
has a polarized plug (one blade is wider than the other). As a safety
feature, this plug will t into a polarized outlet only one way. If the plug
does not t securely, reverse the plug. If it still does not t, contact a
qualied electrician. Do not attempt to defeat this safety feature.
GENERAL SPECIFICATIONS
Model: D15NA
Rated Voltage: 125V
Frequency (Hz): 60Hz
Rated Wattage: 1875W
Length of A.C. Cord: 9 ft./2.7 m
Weight: 20 oz. (1.25 lbs.)/570 g
Accessory: Nozzle and diffuser
MAINTENANCE
The dryer is virtually maintenance-free. No lubrication is needed.
Unplug the dryer from the power source prior to any maintenance.
Keep all vents and openings clear of dirt and dust. The exterior of
the dryer should be wiped clean with a damp cloth only. The air lter
cover, at the rear of the dryer, should be removed and the area cleaned
of any hair or dust. There is an air lter underneath the air lter cover
that should also be washed and cleaned every couple of weeks so hair
doesn’t catch in the fan. To keep the dryer clean, unplug the dryer from
the power source, remove the mesh lter, and wash the mesh lter with
soap and water every 30 days.
OVERHEATING
If overheating occurs, an automatic safety device will trip off and the
cool air will come out of the dryer for a period of time. Then the hot
air will come out again after the automatic safety device resets itself.
If this occurs, unplug the cord and allow the dryer to cool for 10 to 15
minutes. Make sure the air vents and removable mesh lter are fully
cleaned before starting again. For easy cleaning, simply twist the lter
cap open to remove the mesh lter, and wash with soap and warm
water. Let the mesh lter dry completely before inserting it back into
position, then twist the lter cap to the lock position.
Defects and Malfunction
• Read all contents of the warranty completely and carefully
before contacting the salon, the distributor, or our Paul Mitchell®
Pro Tools™Warranty Center.
• The dryer is covered under warranty for 12 months from the date
of purchase.

• John Paul Mitchell Systems®is not responsible for damage
caused by misuse or due to operator accidents, such as dropping
the appliance on the oor.
IMPORTANT
SAFETY INSTRUCTIONS
When using electric appliances, especially when
children are present, basic safety precautions should
always be followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING.
KEEP AWAY FROM WATER.
DANGER – As with most electric appliances,
electrical parts are electrically live even when switch
is off.
To reduce the risk of death by electric shock:
1. Always “unplug it” immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be
pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. If an appliance falls into water, “unplug it” immediately. Do
not reach into the water.
WARNING – To reduce the risk of burns,
electrocution, re or injury to persons:
• Use the dryer only for the purpose described in this guide
to prevent accidents, misuse, damage, or malfunction.
• Use this appliance only for its intended use as described
in this manual.
• This appliance should never be left unattended when
plugged in.
• Close supervision is necessary when this appliance is
used by, on, or near children or individuals with certain
disabilities.
• Do not use attachment not recommended by the
manufacturer.
• Never operate this appliance if it has a damaged cord or
plug, if it is not working properly or it has been dropped,
damaged, or dropped into water. Return the appliance to
a service center for examination and repair.
• Plug the dryer into an electrical outlet of AC 125V/60Hz.
• KEEP AWAY FROM WATER to prevent re, electric shock,
damage, or malfunction.
• KEEP AWAY FROM CHILDREN.
• Do not handle the dryer or cord with wet hands, as this
may cause electric shock, personal injury and/or property
damage.
• Keep the cord away from heated surfaces.
• DO NOT WRAP THE CORD AROUND THE DRYER. Allow
the cord to hang loose and straight at the point of entry
into the dryer.
• Never drop or insert objects into any of the dryer openings.
• Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
• DO NOT USE WHEN CORD HAS BEEN DAMAGED OR IF
PLUG IS LOOSE.

• DO NOT REPAIR, TAMPER WITH, OR TRY TO
RECONSTRUCT the dryer or electric shock, personal injury,
property damage, malfunction, or accidents may result.
• When inserting or pulling out the plug, hold the plug rmly
to prevent the cord from peeling and to prevent accidents,
misuse, personal injury, property damage, or malfunction.
• Stop using immediately if you smell an offensive odor. If
ignored, it could cause a re or other accidents.
• Do not keep the dryer in a damp place, such as a bathroom,
or it may malfuntion.
• Stop using the dryer and remove from the power source
when there is an earthquake or thunder.
• Unplug the dryer from the power source when cleaning or
wiping to prevent re or electric shock.
• Never block the air openings of the dryer or place it on
a soft surface, such as a bed or couch, where the air
openings may be blocked.
• Keep the air openings free of lint, hair, etc.
• Never use while sleeping
• Never drop or insert any object into any opening or hose.
• Do not use an extension cord with this appliance.
• Avoid multiple cables to a plug.
SAVE THESE INSTRUCTIONS
• Do not direct hot air toward eyes or other heat sensitive areas.
• Attachments may be hot during use. Allow them to cool
before handling.
• Do not place the dryer on any surface while it is operating.
• While using the appliance, keep your hair away from the
air inlets.
• Do not operate with a voltage converter.
THE ALCI PLUG
This appliance is equipped with ALCI (appliance leakage current
interrupter) safety device specically engineered for safety. ALCI plug
is intended to interrupt its load circuit when there is an electrical fault
to the appliance. It is for household use and may be plugged into a
standard AC electrical outlet (ordinary household current). The ALCI
safety device in this unit is built into the plug. This device will make
it inoperable under some abnormal conditions, such as accidental
immersion in water. If the appliance is immersed in water, do not
attempt to reset the ALCI safety device.
The ALCI safety device is equipped with a test button so that its
operation can be checked.
TO TEST
1. Press the Reset button on the ALCI safety device.
2. Plug your blow-dryer into an AC outlet then press the Test button.
3. The Reset button will pop out. This veries the safety device is
operating properly. If the Reset button does not pop out, do not
use the unit. Return it immediately for service.
4. Press the Reset button to reactivate the ALCI safety device. Your
blow-dryer is ready for use. Repeat this procedure every time
you use the blow-dryer to conrm that the safety device is
operating properly.
SPECIAL ATTENTION
If the unit detects an electrical shock hazard, it will immediately shut
off. To restore power, press the Reset button on the ALCI safety
device to reactivate the circuit.
Test the ALCI plug before each use as noted:
1. Press Test button.
2. Reset button will pop up. If it doesn’t, do not use appliance.
3. Press Reset button to test for power.
If the ALCI plug is damaged, it must be replaced by the manufacturer
or its service agent in order to avoid a hazard.

WARRANTY
RETURN PROCEDURE
For all warranty issues, please call 1-888-522-8622 or
email us at [email protected] for further
instructions and return address.
WARRANTY GUIDE
IMPORTANT WARRANTY NOTICE
A purchase receipt is required for all warranty claims.
(Please read details below)
IMPORTANT: Warranty valid only when appliance is purchased from an
authorized Paul Mitchell®salon or distributor. Warranty valid only for
the Express Ion Dry®+.
Terms and conditions may vary depending on salon/authorized
retailer’s individual exchange or return policy.
LIMITED 12-MONTH WARRANTY
Our 12-month warranty covers tools within the U.S. (Alaska, Hawaii, Puerto
Rico, and Continental U.S.) and Canada only, and only when purchased from
an authorized Paul Mitchell® salon or distributor. The Paul Mitchell® Pro Tools™
warranty covers the appliance against defects in material or workmanship for
12 months from the date of purchase.
Sorry, no refunds will be given.
THIS WARRANTY DOES NOT COVER
• Damage due to any modications to the appliance
• Normal wear and tear, which includes but is not limited to, housing or
barrel scratches, and shorts or cuts in the power supply cord or plug
• Damage due to misuse and abuse such as:
- Dropping
- Wrong voltage supply
- Neglecting safety precautions
• Tampering, such as repair or attempted repair by unauthorized party
• Neglect or lack of proper maintenance
• Damage to cord. Please do not wrap the cord around the iron, as it
can result in the cord breaking.
PLEASE BE ADVISED THAT IMPROPER USE OR MAINTENANCE
OF YOUR APPLIANCE CAN RESULT IN DAMAGE TO PROPERTY
OR PERSONAL INJURY, INCLUDING GREAT BODILY HARM. IT IS
IMPORTANT TO FOLLOW THE INSTRUCTIONS. FAILURE TO DO SO
CAN VOID THIS WARRANTY.
WITH PROOF OF PURCHASE AND WITHIN 12 MONTHS
Exchange of defective appliance is at Paul Mitchell’s discretion. If your
Paul Mitchell® Pro Tools™appliance fails to operate properly within the
rst 12 months of purchase, consumers can return the iron to the salon
where it was purchased (terms and conditions may vary depending on
salon/authorized retailer’s individual exchange or return policy), and
stylists can return it to their distributor, making sure to bring the original
proof of purchase. Otherwise, please call 1-888-522-8622 or email us at
[email protected] for further instructions. For replacement
of appliance under warranty, there is a $14.00 (USD) fee payable to
Paul Mitchell® Pro Tools™ to cover shipping, handling, and insurance to
send your replacement appliance to you.
Repair or servicing of defective appliances is not offered.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO
THE 12-MONTH DURATION OF THIS WRITTEN LIMITED WARRANTY.
IN NO EVENT SHALL JOHN PAUL MITCHELL SYSTEMS® BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR
IMPLIED, WHATSOEVER.
This warranty gives you specic legal rights, and you may also have other
rights, which may vary from state to state both in the U.S. and Canada.
Guaranteed ONLY when purchased within the professional
beauty salon industry, NOT from a drugstore, supermarket,
or other unauthorized source.