Pawleys Island COASTAL CHAIR User manual

COASTAL COLLECTION
CHAIR & ROCKER
ROPE OR CUSHIONED
INSTRUCTIONS • RUBBER MALLET
• PHILLIPS HEAD
SCREWDRIVER
1. BARREL BOLTS:
(12) 1.5”, (2) 2.5”
2. BARREL NUTS: (14)
3. Hex Key (Not Shown)
1. BARREL BOLTS:
(4) 1.5”
2. BARREL NUTS: (4)
HARDWARE PACK
ASSEMBLY
SUGGESTED TOOLS
1.
2.
NOTE. Instructions not to scale.
Example does not show rope or cushion
STEP 1. Use (6) 1.5” barrel bolts and (6) barrel nuts to attach
arm assemblies to rear and front arm support.
NOTE. do not tighten bolts until Step 5.
1.5” BARREL
BOLTS
1.5” BARREL
BOLTS
2.5” BARREL
BOLT
2.5” BARREL
BOLT
1.5” BARREL
BOLTS
1.5” BARREL
BOLTS
BARREL NUTS
BARREL NUTS
BARREL NUTS
BARREL
NUT
STEP 2. Use (2) 2.5” barrel bolts, (6) 1.5” barrel bolts, and (8) barrel
nuts to attach arm assemblies & supports to inside of chair frame.
Chair Hardware Pack:
Additional Rocker Hardware Pack:

ROCKER ASSEMBLY
STEP 2. Use (4) 1.5” barrel bolts and (4) barrel nuts to attach
rockers to legs.
BARREL NUTS
BARREL
NUTS
1.5” BARREL
BOLTS
1.5” BARREL
BOLTS
Congratulations on purchasing this Coastal Collection Chair & Rocker with Rope or Cushion.
QUESTIONS REGARDING THIS PRODUCT? Call our customer service team,
1-800-344-6433.
WARRANTY & RETURNS - Pawleys Island Hammocks products are guaranteed to be free of defects in both
workmanship and material. Prolonged exposure to weather conditions including snow, rain, and humidity are not
covered under the warranty, nor is damaged caused by normal wear, mildew, or improper care, including storage,
maintenance, and assembly. If you are not satisfied with an item, return it unused in its original packaging for a
complete refund or exchange. You can return it to any of our stores or to our warehouse, Nags Head hammocks,
305 Industrial Blvd., Greenville, NC 27834. Please include a copy of your receipt and your contact information.