Pawleys Island Durawood User manual

ASSEMBLY INSTRUCTIONS continue, back of page; Residential Lifetime Warranty, back of page
HARDWARE PACK 4 - 2" Regular Bolts
4- Washers
4 - Lock Nuts
16 - 2" Screws
1 - Allen Wrench
1 - Square-Head Drill Bit
2 leg assemblies
ASSEMBLY INSTRUCTIONS
SUGGESTED TOOLS (NOT PROVIDED)
•Standard Phillips Head Screwdriver
•Drill (Square-Head Drill Bit
provided in HARDWARE PACK)
Congratulations on purchasing this Durawood Dining Table! You’re going to love the quality, durability and simple assembly —plus
the full Residential Lifetime Warranty. QUESTIONS ABOUT THIS PRODUCT? Call our customer service team, [phone].
Before beginning assembly, make sure you have all parts. Note that not all parts pictured are
to scale.
tabletops
fascia
plates
2 spreader bars
TABLE PARTS
pole support
plate
FIGURE 1
FIGURE 2
FIGURE 3
STEP 1. Stand one Table Leg upside down.
STEP 2. Attach Fascia Plate to Table Leg as shown. (FIGURE 1) Secure using 2 Screws.
Repeat for opposite side of same Table Leg. Attach second Table Leg using same proce-
dure.
STEP 3. Insert Spreader Bar into Table Leg (FIGURE 2) and secure with 1 Screw per end
(FIGURE 3). Repeat with second Spreader Bar.
Durawood Large/Small Dining Table
Hardware pack
weight: 5.45 oz

RESIDENTIAL WARRANTY | This quality product includes a FULL LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the un-
likely event any splintering, rotting, cracking, peeling, chipping, insect infestation or other damage should ever occur, The Ham-
mock Source will replace this furniture, at no charge to you. Note that an original sales receipt must accompany any returned
product, along with a Return Authorization Number from The Hammock Source customer service; call toll-free at [phone].
CONTRACTOR WARRANTY | CONTRACTORS receive a FULL 7-YEAR WARRANTY. Follow the same steps outlined above. #6024 / 10416
FIGURE 4
FIGURE 7
STEP 4. Insert Pole Plate into Leg Assembly as shown (FIGURE 4). Secure using 2 Screws on each side (FIGURE 5).
STEP 5. Place Table Top upside down as shown (FIGURE 6).
STEP 6. Align holes of completed Leg Assembly with holes in metal railing on Table Top. Affix using regular Bolts. Place one Washer onto Bolt,
once Bolt is through holes and secure with a Lock Nut. (FIGURE 7)
STEP 7. Tighten all Screws and Bolts securely.
FIGURE 6
FIGURE 5