Paxar AC Adapter Monarch 6063TM User manual

TC6063OI Rev. AD 1/08 ©2008 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp.
All Rights Reserved.
AC ADAPTER OPERATING
INSTRUCTIONS
The Monarch® 6063™ AC Adapter provides continuous power to your
Monarch® Pathfinder® Ultra® Silver 6032™ and the Monarch®
Pathfinder® Ultra® Platinum 6039™ printers. You can use the adapter
instead of a rechargeable battery. The adapter plugs into any standard
grounded electrical outlet and allows you to print large volumes of labels
without switching or recharging the battery.
Kit Contents
The AC Adapter kit comes with
♦ a new battery compartment door with a notch in it.
♦ a power cord (domestic models only).
♦ an adapter pack.
♦ a power supply.
Power Supply
Power Cord
New Door
Adapter Pack

2Installing the Adapter
Installing the Adapter
To install the adapter:
1. Press the button on the battery compartment door (located at the
bottom of the printer’s handle) and slide it open, pulling firmly. Pull
the door completely off the printer and lay it aside.
2. Pull the battery out of the compartment. Or, place your hand beneath
the printer, turn the printer upright, and catch the battery in your hand
as it slides out.
3. Insert the adapter pack (connector end first) into the printer’s battery
compartment.
Battery
Compartment
Door
Button
Battery

Installing the Adapter 3
4. Pushing firmly, put the new battery compartment door on the printer.
The adapter pack cord should stick out of the notch in the door.
5. Connect the adapter pack and the power supply by lining up the
connectors and screwing them together.
6. Plug the power cord into the power supply.
7. Plug the other end of the power cord into a grounded electrical outlet.
Notch

Visit www.paxar.com for sales, service, supplies, information, and
telephone numbers for our locations throughout the world.
TOLL FREE:
1-800-543-6650 (U.S.A.)
1-800-363-7525 (Canada)