Paxton Lounge Swivel Rocker User manual

Page 1 of 4
WM-MART 5PC MOTION
DINING SET- SWIVEL CHAIR
Owner’s Manual
If you have any problems with this product,
DO NOT RETURN IT TO THE STORE.
CALL OURCUSTOMER SERVICE HOT-LINE at
[phone]
8am-5pm (EST), Monday-Thurday,8am-4pm(EST),Friday.

Page 2 of 4
Warranty
In order to activate your warranty please register at www.bjifurniture.com. There you can review our
full warranty details and other helpful information. Or, you may call us at ([phone],
8am - 5pm (EST), Monday –Thursday, 8am –4pm(EST), Friday
CAUTION: Read all the instructions before assembly. Failure to do so may result in faulty
assembly and potential injury!
Assemble product on a soft, non-abrasive surface such as a carpet or cardboard to avoid
damaging the item. Seek as-sistance to assemble bulky or heavy items. After final
alignment, make sure all bolts are securely tightened with hex caps press in place.
Parts List
Item
Part Name
Part picture
Qty
Item
Part Name
Part picture
Qty
A
Seating frame
1
F
Spring Washer
4
B
Rocker Base
1
G
M8 Bolt Cover
4
C
Stem Bracket
1
H
M8 Open
Wrench
2
D
M8 Nut
1
I
Lumbar Pillow
1
E
Hex bolt
M8x25mm
4
J
Seat Cushion
1

Page 3 of 4
Step1 : Attach Stem Bracket (C)
with Seating frame(A), using Hex
Bolt M8x25mm (E), Spring
Washer(F) and M8 Nut (D).
Finally, tighten M8 nuts with M8
Open Wrench (H).Cover all bolt
heads with M8 Bolt Cover (G).
NOTE: When assembling, please
make sure the Red arrow stickers
on Stem Bracket (C) and Seating
frame bottom are on the same
direction.
See Figure 1.
Figure 1
Step 2：Insert the chair bucket stem
into Bottom Base (B) completely.
NOTE: Please make sure the chair
bucket stem is fully inverted into
base.
See Figure 2.
Figure 2
B
A

Page 4 of 4
Step 3：Put the Seat
Cushion(J),Lumbar Pillow (I)，on the
assembled chair.
See Figure 3.
Now your chair is ready to use!
Figure 3
I
J