Peachtree Deepblue2 User manual

Bluet th Speaker
peachtree audio
0
Owner s Manual

IMPORTANT SAFETY INSTRUCTIONS
0 Read these instructions -All the safety and operating instructions should be read before this product
is operated.
8 Keep these instructions- The safety and operating instructions should be retained for future reference.
8 Heed all warnings- All warnings on the appliance and in the operating instructions should be adhered to.
0 Follow all instructions.
0 Do not use this apparatus near water- The appliance should not be used near water or moisture -for
example, in a wet basement or near a swimming pool, and the like.
8 Clean only with dry cloth. Unplug the deepblue2 before cleaning.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including
amplifiers) that produce heat.
0 Protect the power cord from being walked on or pinched particular1y at the plugs, convenience receptacles,
and at the point where they exit from the apparatus.
8 Only use attachments/accessories specified by the manufacturer.
G) Unplug this apparatus during lightning storms or when unused for long periods of time.
4D Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in
any way such as the power cord or plug is damaged. Other damage may occur if liquid or objects have been
dropped or spilled into the apparatus. Dropping the apparatus, exposure to rain, and excessive moisture may
cause additional damage.
_, Please keep the unit in a good ventilation environment.
e CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that contained in the operating Instructions unless you
are qualified to do so.
ft WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or splashing and objects filled with liquids, such as vases, shall
not be placed on apparatus.
8 WARNING: The mains plug/appliance coupler is used as disconnect device, the disconnect device shall
remain readily operable.
0 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
WARNING: To reduce the risk of electric shock, do not remove cover (or back) as
there are no user-serviceable parts inside. Refer servicing to qualified personnel.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT The exclamation point within an equilateral triangle is intended to alert the user to the
~:~~~~~:~~;::i~~~~~~R~~~~Ee:sLE presence of important operating and maintenance instructions in the literature accom-
L...--s-ERVJ-cE_PE_Rs_oN_NEL_. ____ __, panying the appliance.
0 No naked flame sources, such as lighted candles, should be placed on the apparatus.
8 't:t Correct disposal of this product. This marking indicates that this product should not be disposed with
.A other household wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for environmentally safe recycling.
4D Move the deepblue
2
away from other wireless devices that could be causing interference.
G) Install deepblue
2
far away from heat sources.
0 Use only the accessories provided.
UNPACKING AND WARRANTY
0 Keep all packing materials for future shipments.
8 Keep a record of your bill of sale and a copy of the serial number for warranty and insurance purposes.
8 You may register your product on our website: www.peachtreeaudio.com.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•Connect the equipment into
an outlet on a circuit differentfrom that to which the receiver is connected.
• Consult the dealer or
an experienced radio/TV technician for help.
RF Exposure Statement
To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated
with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

•Introduction
• Contents and Rear Panel Connections
•Top Panel Buttons
• Remote Control
• Useful Tips and More ...
•Troubleshooting and Specifications
• Product Warranty and Service
deep blue
•
(08800)
0 0 0 0 0
(Rev. 10/2014)

4
Thank you for purchasing a Peachtree Audio deepblue
21
At Peachtree Audio
we
design products that utilize a unique combination
of analog and
digital
technologies
that
work
together
to
provide
a
compelling
music listening experience. The deepblue2 combines a
high-performance all-in-one speaker with the convenience of
an
aptX™
Bluetooth wireless receiver to connect to any Bluetooth equipped mobile
device or
PC.
The deepblue2 also provides analog and optical digital
inputs so you can connect up to three separate devices. The deepblue2
features two tweeters, two midranges and a dedicated 6.5" woofer all
driven by a 440-watt power amplifier to provide amazing sound quality
and output capability from a relatively small footprint.
This manual is a intended as an overall guide to your deepblue
2•
It
explains how to set it up, pair and connect devices and use it from the top
panel and remote control. There are also some tips and troubleshooting
should you have additional questions.
We
sincerely hope the deepblue
2
provides you with many years of music listening enjoymentI
Please visit our website at www.peachtreeaudio.com for the latest tips
on getting the best sound quality from the music stored or streamed from
your computer and from all of your sources. Please contact your dealer or
Peachtree Audio directly if you have any questions that this manual does
not answer. Also, now is a great time to visit our website and register your
deepblue
2•
Thanks again for you support and happy listeningI
-The Peachtree Audio team

Contents
of
Packaging:
• deepblue
2
•AC power cord
•
IR
remote control with battery
• 3.5mm to RCA adapter cable
• Optical digital cable
• 3.5mm to 3.5mm cable for smartphones
0 0 0
0 I D
@
Oo
oO
0 AUX Analog Audio Input: Accepts line-level analog input from a tuner, cassette
deck, phono preamp or other type of line-level analog source.
Notes: Phono input requires the use of a phono preamplifier. When using the head-
phone output of a connected device, that device's volume control will affect the
1nput
level to the deepblue
2.
The maximum output level of the deepblue
2
will be
limited if the volume control of the connected device is set to relatively low level.
8 AC-IN: For connection to a compatible AC power source using the included power
cord.
8
USB
Digital Input: For service use only. Note: Does NOTfunction as a
USB
digital
audio input.
0
OPT
Digital Audio Input: Accepts digital audio input from a Toslink optical digital
audio output up to 96kHz. Toslink digital audio outputs are common on most digital
audio sources including; disc players, cable boxes, Apple TVs, etc
...
5

deep blue
80
88
2 4 5
0 Bluetooth: Push and release to select the Bluetooth input. The blue LED will light
for 10 seconds indicating the input
is selected. Push and hold for several seconds to
enter Bluetooth pairing mode. The Bluetooth LEOs will flash blue and white
in this
mode. Enterthe Bluetooth menu on your device and select "deepblue2" to confirm
the pairing. The Bluetooth LED will light solid blue and
you will hear a double-beep
when the deepblue2 is connected to a Bluetooth device.
Notes: deepblue2 will pair with up to 5 Bluetooth devices. After they are paired,
pressing and releasing the Bluetooth button will switch between them.
To clear
all paired devices, press and hold the power button for 10 seconds. The white
power LED will blink to confirm that the Bluetooth paired device memory has been
cleared.
8 INPUT: Push and release to toggle between the AUX (blue LED) and OPT (white
LED) inputs on the rear panel. The blue LED will light for 10 seconds indicating
the AUX input is selected. The white LED will light for 10 seconds indicating the
OPT input is selected.
8 On/Standby: Push and release to toggle between power on and standby modes.
The current input LED will light for 10 seconds after the unit is toggled on.
8 Volume "-": Push and release to decrease the volume level by 1 step. Push and
hold for more than 1 second to decrease the volume level by multiple steps. The
volume will continue decreasing until you release the button or achieve the minimum
volume level.
0 Volume"+": Push and release to increase the volume level by 1 step. Push and
hold for more than 1 second to increase the volume level by multiple steps. The
volume will continue increasing until you release the button or achieve the maximum
volume level.
6
Notes: The five LEOs will flash white while audio is muted. The blue LEOs
indicate the volume level for 10 seconds after a volume button is released. Each
LED represents
20°/o of the volume range.

0
On
I Standby:
Push
and
release
to
toggle
between
power
on
and
standby
modes.
The
current
input
LED
will
light
for
10
seconds
after
the
unit
is
toggled
on.
f)
VOL
A:
Push
and
release
to
increase
the
volume
level
by
1
step.
Push
and
hold
for
more
than
1
second
to
increase
the
volume
level
by
multiple
steps.
The
volume
will
continue
increasing
until
you
release
the
button
or
achieve
the
maximum
volume
f)
level.
VOIVA:
Push
and
release
to
decrease
the
volume
level
by
1
step.
Push
and
hold
for
more
than 1
second
to decrease
the
volume level
by
multiple steps. The
volume
will
continue
decreasing
until
you
release
the
button
or
achieve
the
minimum
volume level.
OMute Symbol:
Push
and
release
to
toggle
audio
muting
on
and
off.
The
five
LEOs
will
flash
white
while
audio
is
muted.
Notes:
The
blue
LEOs
indicate
the
volume
level
for
10
seconds after a volume
button
is
released.
Each
LED
represents
20%
of
the
volume
range.
0 BASS+:
Push
and
release
to
increase
the
bass
level
by
1
step.
Push
and
hold
for
more
than
1 second
to
increase
the
bass level
by
multiple steps. The bass will continue
increasing
until
you
release
the
button
or
achieve
the
maximum
bass
level.
8 BASS-:
Push
and
release
to
decrease
the
bass
level
by
1
step.
Push
and
hold
for
more
than
1
second
to
decrease
the
bass
level
by
multiple
steps.
The
bass
will
continue
decreasing
until
you
release
the
button
or
achieve
the
minimum
bass
level.
Notes:
The
first
press
of
the
BASS+
or
BASS-
buttons will display the current setting via
the white
LEOs.
Subsequent
presses
within
10
seconds
will
adjust
the
bass
setting.
Each
white
LED
represents
20%
of
the
bass
range.
The
lowest
bass
setting
(1)
is
indicated
by
the
left-most
LED
being
lit
50%.
The
highest
setting
(1
0)
is
indicated
by
all
the
LEOs
being
fully
lit.
8
AUX:
Push
and
release
to
select
the
AUX
input
on
the
rear
panel.
The
blue
LED
will
light for
10
seconds indicating the
AUX
input
is
selected
.
Note:
When
the
unit
is
in
standby
mode,
this
will
also
turn
the
unit
on.
0
OPT:
Push
and
release
to
select
the
OPT
input
on
the
rear
panel.
The
white
LED
will
light for 1
0 seconds indicating the OPT
input
is
selected.
Note:
When
the
unit
is
in
standby
mode,
this
will
also
turn
the
unit
on
.
0 Bluetooth Symbol:
Push
and release
to select the Bluetooth input. The blue
LED
will
light for 1
0 seconds indicating
the
input
is
selected. Note: deepblue
2
will
pair
with
up
to
5 Bluetooth
devices.
After they
are
paired,
pressing
and
releasing the
Bluetooth button will switch between
them. 7

Pairing
Your
Device
Refer
to
your
Bluetooth
device's owner's
manual
for
details
on
how
to
enter
the
device's
Bluetooth
pairing
mode.
8
Push
and
hold
the
Bluetooth
button
on
the top
panelfor
at
least
4
seconds
to
en-
ter
Bluetooth
pairing
mode.
The
Bluetooth
LED
will
flash
blue
and
white
in
this
mode.
8
Turn
on
the
Bluetooth
feature
on
your
device.
Typically,
Bluetooth
controls
are
found
in
the
device
settings
menu.
Enter
the
Bluetooth
menu
on
your
device
and
select
"deepblue2"
to
confirm
the
pairing.
8
Once
paired
with
a
device,
the
Bluetooth
LED
will
light
blue.
A double-beep
sound
will
also
indicate
that
the
connection
is
estabilished.
Note:
Pairing
remains
even
when
the
player
or
the
Bluetooth
device
is
powered
off
or
is
taken
out
of
range,
The
player
will
attempt
to
connect
with
the
last
connected
device
when
that
device
is
powered
on
and
in
range.
Your
Bluetooth
device
may
pause
music
playback
when
the
Bluetooth
connection
is
lost.
You
may
need
to
press
the
play
button
on
the
Bluetooth
device
to
resume
playback
after
the
Bluetooth
connection
is
restored.
Reconnecting
Your
Device
If
you
move
out
of
range
or
turn
off
the
Bluetooth
feature
your
deepblue
2
will
be
disconnected
from
your
device
and
the
LED
will
flash
blue.
To
reconnect,
simply
open
the
Bluetooth
menu
and
tap
on
the
"deepblue2"
and
the
connection
will
be
reestablished.
Out
of
Range
or Lost
Signal
When
the
paired
device
is
more
than
-
33
feet
away
from
the
deepblue
2
or
there
is
some-
thing
blocking
the
Bluetooth
signal.
The
LED
will
flash
blue
to
indicate
the
connection
between
the
device
and
the
deepblue
2
is
lost.
To
reestablish
a
lost
connection:
8
Move
the
connected
device
back
into
range
(within-
33
feet),
and
make
sure
there's
a
clear
line
of
sight
and
there
are
no
obstructions
between
deepblue
2
and
device.
8
The
connection
will
automatically
be
reestablished
and
the
LED
will
turn
light
blue.
8
If
the
connection
is
lost,
you
need
to
reconnect
the
device
and
the
deepblue
2
again.
Please
follow
the
"Reconnecting
Your
Device"
instructions
above.
AUX
Analog Audio Input
Use
the
included
3.5mm
analog
cable
or
3.5mm
to
RCA
cable
to
connect
the
line-level
output
from
a
source
like
a
TV,
set-top
box
or
similar
device.
Notes:
Phono
input
requires
the
use
of
a
phono
preamplifier.
When
using
the
headphone
output
of
a
connected
device,
that device's
volume
control
will
affect
the
input
level
to
the
deepblue
2•
The
maximum
output
level
of
the
deepblue2
will
be
limited
if
the
volume
control
of
the
connected
device
is
set
to
relatively
low
level.
OPT
Digital Audio Input
Use
an
optical
digital
audio
cable
to
connect
the
S/PDIF
output
from
a
digital
source
like
a
media
player,
CD
player,
TV,
set-top
box
or
similar.
8

Make sure the deepblue
2
is plugged in and turned on (indicated
by
all of the
top
panel buttons lit white).
Check
that
the correct input is selected; Bluetooth (Biuetooth
LED
blue},
AUX (Input LED lit blue) or
OPT
(Input LED lit white).
If the Bluetooth LED is flashing blue, the input is selected but a Bluetooth
device
is
not
currently connected.
Check
the following next:
Make sure Bluetooth is enabled on your device.
Make sure your Bluetooth device is within
-33
feet of the deepblue2. Move
closer or adjust the position of
the
deepblue2
to
establish a connection.
Make sure
music
is playing on
your
device (not paused) and that the volume
on the device is not muted or set
to
a very low level.
Many
devices will pause
playback if the Bluetooth connection is lost.
If AUX is selected, make sure
the
wired connection is fully inserted on the
connected device
and
the deepblue2. If the connection is ok,
check
the vol-
ume
level of the connected device (if using a headphone output)
to
make
sure it is
not
muted
or
set
to
a very low level.
If
OPT
is
selected,
make
sure
the
wired connection is fully inserted on the
connected device and the
dee~blue2.
If
the connection is ok, check the volume
level of the connected device
(If
using a device with a built-in volume control)
to
make
sure it is not muted or
set
to a very low level.
Make sure the volume
of
the
deepblue2
is set
to
a comfortable listening level.
Specifications:
• Acoustic Design:
(2) 1-inch high
frequency
drivers
(2) 3-inch midrange
frequency
drivers
(1) 6.5-inch low frequency driver
Acoustically sealed cabinet
•
Power
Amplifer: 440 Watts
• Inputs:
=
aptX Bluetooth wireless with
up
to
5 connected devices
Optical Digital Audio (Toslink)
Line-level Analog Audio (3.5mm)
• Dimensions (H x W x D):
9.1
x 14.2 x 6.5 (inches)
/230
x
360x
164
(mm)
• Weight: 16
pounds
/7.3
kg
• AC Input: 100-240V 50/60Hz
9

10
International Warranty and
Claims Under Warranty
International Warranty
The deepblue
2
has a 1 year Parts and Labor warranty from the date of purchase.
Units that are covered under this warranty include deepblue
2
's purchased
directly from authorized Peachtree Audio dealers or distributors.
Peachtree Audio takes
no
responsibility for defects arising
from
accident, misuse,
abuse, unusual wear and tear, neglect, unauthorized adjustment or repair. This
warranty does not cover shipping costs.
Visit
www.peachtreeaudio.com for a copy of
the complete
warranty.
Claims Under Warranty
In
the unlikely event that you experience a failure with your product please
email [email protected] for a Return Authorization (RA) number
BEFORE shipping the product for service. Any product received without an
RA number may be refused.
You
may also wish to route your repair through
your dealer or distributor, which we encourage.
The unit should be packed in its original shipping carton and packaging and
returned to the dealer from whom it was purchased, or if unavailable, directly
to the service center as directed by Peachtree Audio.
Please use a suitable carrier like FedEx or UPS. DO NOTSEND
BY
POSTAL
SERVICE. Peachtree Audio cannot accept responsibility for products while
they are
in
transit to the dealer, distributor, or service facility. Please insure the
product against potential loss or damage while
in
transit.
For technical support (not RA number requests), please call 704-391-9337 or
email [email protected].
Main office:
Peachtree Audio
2045 120th Avenue NE
Bellevue, WA 98005
704-391-9337
www.peachtreeaudio.com