Product Features
DISTORTION
( 、 、THD<1.5% 1W 1m 200Hz-10kHz)
FREQ. RESPONSE
( 、 、dB SPL 1W 1m)
Thanks for using our speaker products. All our products are tested strictly before leaving
the factory, with guaranteed quality.
Our speakers are widely used in such places as schools, gymnasiums, square halls, parks,
parking lots, railway stations, airports, villa communities and mall supermarkets, etc., and they
will be your ideal choice for public address system.
For better installation, commissioning and use of the product, please read this manual in detail
before installation.
Introduction
● It is made of high-class resin, sturdy and style graceful, suited for grass plot;
70/100V, rated power 15W, suitable for different field;
Max. Sound Pressure Level 99 2dB, out door design, Effective Freq. Range
150Hz-20kHz;
Weight 3.6kg, standing steady;
Waterproof driver, high sensitivity (86 2dB), long life, sounds clear and
sonorousness.
●
●±
●
●±
Guangzhou Q&S Audio Co., Ltd
Installation & Wiring
Terminals
Voltage
Power
Black Blue--
70V 100V
Black White--
8W
15W
15W
30W
DIMENSIONS
FOUNDATION
1. Setup a foundation like a platform with concrete and set 2 screws (6mm) stretching
out 3cm in it as shown above after concrete rigidify continue;
2. Connect audio broadcasting wire to the speaker terminals according to the table
below;
Notice:“ * ” While broadcasting wire is quite long and with high impedance only.
3. Fix the speaker system with 3 nuts on screws of the foundation;
4. Finally, examine whether it is steady.
258mm
224mm
2 screws(6mm)
