peerless-AV DST995 Instruction manual

12013-09-16 #:145-9028-4 (2013-10-31)
DST995
COMPATIBILITY
MOD POLES COLUMNS ACCESSORIES
MOD-P100(-B), MOD-P150(-B), MOD-P200(-B),
MOD-P300(-B)
*MOD COLUMNS REQUIRE MOD-ATA
ADAPTER
EXT006 through EXT110,
AEC012018 through AEC1012,
ALU0090012 through ALU1012,
ADD series
ACC-V800X
95"
(241 cm)
225 lb
(102 kg)
MAX

22013-09-16 #:145-9028-4 (2013-10-31)
This page intentionally left blank.

32013-09-16 #:145-9028-4 (2013-10-31)
Symbols
WARNING
x3
Screws must get
at least three full
turns and t snug.
Do not overtighten screws.
To properly tighten screws: Tighten until screw head
makes contact, then tighten another 1/2 turn. Do not
overtighten screws.
1
2
+1/2
4
3
Tools Needed for Assembly.
5/16"
(8mm)
Before installing make sure the supporting surface will support the combined load of the equipment and
hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail.
Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift
and position equipment. This product is intended for indoor use only. Use of this product outdoors could lead to
product failure or personal injury. Be careful not to pinch ngers when operating the mount. For support please
call customer care at 1-800-865-2112.
WARNING

42013-09-16 #:145-9028-4 (2013-10-31)
A (1)
B (1)
D (1)
component
box
rear cover
E (1)
adapter bracket
C (1)
pinch bracket yaw bracket
Parts List
Description Qty Part #
Acomponent box 1145-1782
Brear cover 1145-1534
Cpinch bracket 1130-1073
Dyaw bracket 1130-1500
Eadapter bracket 1145-1780
Fsnap bushing 25 90 -114 9
Gber washer 1540-9432
Hretaining collar 11800-375
I1/4" SAE at washer 8540-9440
JM5 x 55mm socket pin screw 2 520 -1193
KM5x 10mm socket pin screw 9 520 -1164
LM8 x 15mm socket pin screw 8 520-1068
MM6 x 16mm socket pin screw 4 520 -1132
NM5 nylock nut 2 530-1019
O5/32" (4mm) security wrench 1 560-9646

52013-09-16 #:145-9028-4 (2013-10-31)
F (2)G (1)
H (1)
snap
bushing ber washer
I (8)
1/4" washer
J (2)
M5 x 55mm
K (9)
M5 x 10mm
L (8)
M8 x 15mm
M (4)
M6 x 16mm
N (2)
M5 nylock
nut
O (1)
security wrench
retaining
collar

62013-09-16 #:145-9028-4 (2013-10-31)
2
1b
1a
Install EXT, ADD, AEC, or ALU series extension column
(sold separately). See accompanying instruction.
Install MOD-ATA threaded
adapteradapter.
F (2)
A

72013-09-16 #:145-9028-4 (2013-10-31)
3
G
G
H
HK
MOD-ATA

82013-09-16 #:145-9028-4 (2013-10-31)
4
5
K (2)
K
K
L
K
K
L
L
DC
N (2)
J (2)
⅛"
⅛"
⅛"

92013-09-16 #:145-9028-4 (2013-10-31)
6
15.75"
(400mm)
15.75"
(400mm)
3.94"
(100mm)
7.87"
(200mm)
11.81"
(300mm)
7.87"
(200mm)
31.5"
(800mm)
23.62"
(600mm)
11.81"
(300mm)
PORTRAIT LANDSCAPE
ACC-V800X ACCESSORY SOLD SEPARATELY

10 2013-09-16 #:145-9028-4 (2013-10-31)
7
8
x3
L, M
M
I
If screw (M) bottoms out,
use one or two washers
(I) in each mounting hole
position.
5º10º
15º
Tighten