peerless-AV MIS-ACC201 Guide

ISSUED: 07-27-07 SHEET #: 124-9093-2 02-25-08
1 of 3
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
Before you begin, make sure all parts shown are included with your product.
Parts List
Description Qty. Part#
Amounting box 1 124-1841
Btilt bracket 1 200-1552
CM10 x 15 mm penta-pin screw 8 520-9263
Dpenta-pin driver 1 520-9260
Eu-bolt 2 560-1060
Fnylock nut 4 530-9310
Gflat washer 4 540-9454
NOTE: Some parts may appear slightly different than illustrated.
Installation and Assembly - Double Stack Box Accessory Model: MIS-ACC201
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
A
BC
FG
ED

ISSUED: 07-27-07 SHEET #: 124-9093-2 02-25-082 of 3
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
1/4"
1-1
C
BY HAND, insert four M10 x 1.5 x 15 mm penta-pin screws (C) into threaded holes in the sides of ceiling arm
box (A).Leaveapproximately 1/4" of exposed thread as shown in detail 1.
C
1Securely fasten mounting box (A) to support pipe
(notincluded) using two u-bolts (E), four flat
washers (G) and four nylock nuts (F).
G
F
E
• Installer must verify that the ceiling will safely support the combined weight of all attached equipment and
hardware.
WARNING
SUPPORTPIPE(NOTINCLUDED)
fig 1.2
DETAIL 1
fig 1.1
A

ISSUED: 07-27-07 SHEET #: 124-9093-2 02-25-08
3 of 3
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
Hang tilt bracket (B) onto mounting box (A).Adjust
tilt as desired and tighten four
M10 x 1.5 x 15 mm penta-pin screws (C) securely
usingM10penta-pintool(D).
C
Attach tilt bracket (B) to adapter plate using four M10 x 15 mm penta-pin screws (C) in accordance with
appropriatedrawingbelow.Tighten usingM10penta-pintool(D).
C
B
NOTE: Refertoadapterplateinstructionsheetforattachmentofadapterplatetoplasma beforeproceedingwithstep2.
LANDSCAPE
LANDSCAPE PORTRAIT
LANDSCAPE PORTRAIT
B
A
B
C
ADAPTERPLATE
ADAPTERPLATE
PLASMASCREEN
PLASMASCREEN
NOTE:Screen andadapter
platemayappear different
thanillustrated.
• For a safe assembly be sure to fully tighten four
screws(C).
WARNING
2
Installation of Plasma Screens and 30" or Larger LCD Screens
3
C
A
B
©2007,PeerlessIndustries,Inc.Allrightsreserved.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.