peerless-AV HD Flow HDS200-R User manual

ISSUED: 07-24-12 SHEET #: 180-9025-1
User Manual and Installation Guide
Pro Wireless Multimedia Kit
Models:
HDS200-R
HD Flow Pro Wireless
Multimedia Receiver
READY
®

2 of 36 ISSUED: 07-24-12 SHEET #: 180-9025-1
Contents
Safety Precautions..................................................................................................3
Proper Care and Safety...........................................................................................3
Unit Care Recommendations .................................................................................3
Introduction..............................................................................................................4
Features ................................................................................................................4
Package Contents .................................................................................................4
Product Specifications............................................................................................5
Video Format Supported .......................................................................................5
Audio Format Supported .......................................................................................5
Wireless Connection .............................................................................................5
Receiver ................................................................................................................6
Remote Control ...................................................................................................10
Multicast Programming ........................................................................................13
USB Multicast Setup Method ..............................................................................13
LAN Multicast Setup Method (Recommended) ...................................................13
Connecting your HD Flow Pro Wireless Transmitter or Receiver to the Computer
............................................................................................................................13
Transmitter Start-Up and Connection..................................................................17
Transmitter Multicast Programming.....................................................................17
Receiver 1 LAN Programming.............................................................................20
Receivers 2+ Multicast Programming .................................................................22
Multicast Receiver 2, 3, and 4 Programming ......................................................23
Installation..............................................................................................................26
Powering-up the HD Flow Pro Wireless Multimedia Receiver ............................27
Selecting Input and Output Port .........................................................................28
Indicator Lights Decoded.....................................................................................29
Appendix................................................................................................................30
FCC Compliance .................................................................................................33
CE Compliance ...................................................................................................33
Warranty.................................................................................................................34
Contact Information ..............................................................................................35

3 of 36 ISSUED: 07-24-12 SHEET #: 180-9025-1
• Unit can be placed vertically (preferred) or horizontally.
• To clean, use a soft, dry cloth only. Do not use water or other
cleaning products as they may cause electrical failure or damage
the surface of the product.
Keep the product out of
reach of children.
Keep the product away
from external heat
sources such as heaters
or stoves.
If there is any unusual
sound, smoke or odor
coming from the product,
immediately unplug the
product and call
Peerless-AV Customer
care at 1-800-865-2112.
Keep the battery of
remote control out of
reach of children.
Do not attempt to open
the outer case of the
Transmitter or Receiver.
Doing so will void the
products warranty.
Keep the remote control
away from humidity and/
or liquids.
Do not insert foreign
objects into the unit.
Do not place the unit on
an unstable surface or in
a poorly ventilated area.
Make sure to plug the AC
power adapters firmly into
wall outlet.
Do not use near any
flammable substances or
combustible sprays.
If any part of the AC
power adapter looks
damaged, do not use the
product and immediately
call Peerless-AV
Customer Care at
1-800-865-2112.
Keep the product
unplugged if unused for
an extended period of
time.
Safety Precautions
Please read this manual before using the product.
Proper Care and Safety
Unit Care Recommendations

4 of 36 ISSUED: 07-24-12 SHEET #: 180-9025-1
The HD Flow Pro Wireless Multimedia Receiver expands the peer-to-peer kit to a
multicast system that allows transmitting to up to 4 displays.
Features
• Low latency: ≤30ms.
• Supports both digital (HDMI) and analog (Component, Composite) video/
audio.
• Supports Wireless or Wired connection - IEEE 802.11n 5 GHz WiFi, LAN
connection.
• Two internal antennas (supporting MIMO).
• HDCP v1.1 compliant.
• Supports both DTV & VESA standards: DTV: 1920x1080i60/p60,
1280x720p60, 720x480i60/p60, VESA: WSXGA+(1680x1050),
SXGA(1280x1024), WXGA(1280x800), XGA(1024x768), SVGA(800x600),
VGA(640x480).
• Supports passive 3D content.
• Plug and play setup requires no software programming.
Package Contents
Ensure that the following items are present in the package. If any items are missing or
damaged, please call Peerless-AV Customer Care at 1-800-865-2112
(available 7:00am - 7:00pm CST Monday - Friday).
Remote ControlReceiver
Manual
Stand
AC Adapter
Introduction
User Manual and Installation Guide
Pro Wireless Multimedia Kit
Models:
HDS200-R
®

5 of 36 ISSUED: 07-24-12 SHEET #: 180-9025-1
Product Specifications
1 x HDMI up to 1080p (60Hz)
1 x Composite
1 x YPbPr Component
H.264 Baseline Profile with Level 4.2
HDCP compliant
Wireless Connection Supporting IEEE 802.11n: OFDM
RJ-45 LAN Port
Direct Connection (LAN Cable)
1 x LAN Port
10/100 Base
USB 1 x USB Type A Female
Audio Output 1 x 3.5mm Audio Jack, 1 Stereo RCA Audio Jack
Video Resolution 480i/p, 720p, 1080i/p (24/30/60fps)
Streaming Latency < 30ms
Frequency 5.15 - 5.25GHz
LAN Connection 10/100 Base
Range 131ft (40m)
Security 802.1x, 802.11i, WPA2, WPA and WEP 64/128 TKIP AES
2 x internal antenna
MIMO Interface
IR Extender IR-Extender
Color Black
Voltage: 12VDC
Amps: 2A
Consumption: 12V 2A
Antenna Type
Power
HDS200-R
Video Output
Encoding
Wire Connection
LAN
Video Format Supported
• Digital Video
º HDMI - Up to 1080p @ 24Hz, 25Hz, 30Hz, 50Hz, 60Hz
• Analog Video
º Composite – 480i @ 60Hz, 70Hz, 85Hz
º Component – 1080i @ 50Hz, 60Hz, 720p @ 50Hz, 60Hz
º VGA – Up to 1920x1080 @ 50Hz, 60Hz
Audio Format Supported
• The Receiver outputs stereo audio.
Wireless Connection
• The HD Flow Pro Wireless Multimedia Receiver is capable of receiving Full
HD 1080p media via a wireless connection or a wired connection from an HD
Flow Pro Wireless Multimedia Transmitter.

6 of 36 ISSUED: 07-24-12 SHEET #: 180-9025-1
1
2
3
4
5
6
Receiver Front
Receiver

7 of 36 ISSUED: 07-24-12 SHEET #: 180-9025-1
Receiver Front
1. Power/Link
• Blinking indicator light - System booting or establishing link between the Trans-
mitter and the Receiver.
• Rapid blinking indicator light - Software upgrading or wireless/LAN mode switch-
ing.
• Solid indicator light - Link between the Transmitter and Receiver has been estab-
lished and is ready for signal transmission.
2. HDMI
• The HDMI indicator light will be illuminated when the HDMI port is selected for
video output.
• If there is no signal, and/or the cable is not connected, the indicator light will
blink.
3. COMPO
• The COMPO (component) indicator light will be illuminated when component
output is selected for video out.
• If there is no signal, and/or the cable is not connected, the indicator light will
blink.
4. AV
• The AV Indicator light will be illuminated when the AV port (composite) is
selected for the video output.
• If there is no signal, and/or the cable is not connected the indicator light will
blink.
5. IR Window
• IR receiving window enables remote control of components.
6. Power/Source Selection Button
• Press and hold for 3 seconds to turn on the unit.
• When powered on:
º Press to select the video input source. Each press of the button will cycle
through the available video input "HDMI→COMPO→AV →HDMI" in
sequence.
º Press and hold for 8 seconds to turn the unit off.

8 of 36 ISSUED: 07-24-12 SHEET #: 180-9025-1
1
2
3
4
5
6
7
8
Receiver Back

9 of 36 ISSUED: 07-24-12 SHEET #: 180-9025-1
Receiver Back
1. HDMI-OUT
• HDMI output port
2. AV-OUT
• Composite output port
3. IR-IN
• Connects IR Extender in order to extend IR reception range.
4. AUDIO-OUT*
• Stereo audio output port
5. COMPONENT-OUT*
6. USB
• USB port is used for firmware upgrades only.
7. LAN
• LAN connection port is used for the following:
º Direct connection for LAN installations.
º Direct connection to PC for system configuration settings.
8. DC
• DC Power Input
* For the audio part of a component media source, use the PC Audio Input port with a
3.5mm-to-RCA cable (not included).

10 of 36 ISSUED: 07-24-12 SHEET #: 180-9025-1
Remote Control
Remote Control Functions
1. POWER - Turns the Transmitter and Receiver power ON/OFF.
• ON: If the Transmitter and Receiver are powered off and the Power/Link
Indicator Light is on, press the power button pointed at either unit to turn on
both units at the same time (this will take about 30 seconds).
• ON: If the Transmitter and Receiver are powered off and the Power/Link
Indicator Light is off, each unit will need to be turned on separately. Point the
remote at each unit's IR Input Port and press the power button to turn on. (this
will take about 1 minute and 30 seconds).
• OFF: If the Transmitter and Receiver are powered on and the Power/Link
Indicator Light is on, press the power button to turn off both units at the same
time to put the system in Standby mode. The Power/Link Indicator Light will
remain on.
• OFF: If the Transmitter and Receiver are powered on and the Power/Link
Indicator Light is on, press and hold the power button for 8 seconds. Both
Transmitter and Receiver will be turned off at the same time. The Power/Link
Indicator Light will turn off.
Note: If the Transmitter and Receiver are powered on with the Power/Link Indicator
Light flashing, both units will need to be powered off individually.
1
3
4
5
2
6