PEERLESS SR560G Guide

Flat Panel TV Carts
For 32" to 65" LCD and Plasma Flat Panel Screens
Peerless’ SmartMount®Flat Panel TV Carts offer the most complete mobile
solutions for any application. These versatile presentation carts allow you to
hold meetings with A/V support or simply to display information. Their full
line of accessories enable each cart to be fully tailored to meet your specific
requirements. Whether video conferencing from a boardroom or presenting on
a trade show floor, Peerless’ Flat Panel TV Carts are the solutions you need.
Incremental tilt of -2°, 0°
and +5° makes it simple
to set multiple angles for
preferred viewing and aids
in reducing screen glare
4" swivel casters enable safe
and easy maneuverability over
various flooring surfaces and
through doorways. Two locking
casters ensure complete stability
wherever the cart is placed.
Metal or tinted tempered glass
shelf provides storage space
for A/V components. These
shelves are designed to hold
up to 50 pounds each, ensuring
equipment and user safety.
SR560G
with Glass Shelf
SR560M
with Metal Shelf

Model Numbers
SR560M: Universal cart with metal shelf
SR560G: Universal cart with tinted glass shelf
............................... Product Specifications
FEATURES •Incremental tilt of -2°, 0° and +5° for desired viewing angle
•Universal models for mounting hole patterns up to 28.75"W and 17.05"H
•Vertical adjustment feature to achieve the ideal viewing height
•Internal cable management neatly hides all cords and cables for a clean, clutter-free look
•Adjustable metal or tinted glass shelf for A/V components and accessories
•4" swivel casters ensure safe and easy maneuverability
DIMENSIONS (W x H x D) SR560M: 35.6" x 66.8" x 27.8" (90.4 x 169.8 x 70.6 cm)
SR560G: 35.6" x 66.8" x 27.8" (90.4 x 169.8 x 70.6 cm)
LOAD CAPACITY 250 lb (113.3 kg): 150 lb screen (68 kg), 50 lb per shelf (22.6 kg)
PRODUCT WEIGHT SR560M: 76 lb (34.5 kg)
SR560G: 74 lb (33.6 kg)
FINISH Scratch resistant fused epoxy
AVAILABLE COLORS black
ACCESSORIES ACC313: Metal Shelf
ACC318: Tinted Glass Shelf
ACC319: Video Conferencing Shelf
ACC314: Laptop Arm
ACC315: Base Shelf
ACC320: 20' Electrical Cord Wrap
ACC316: Safety Belt
ACC310: Leveler Feet
............................... Package Specifications
PACKAGE CONTENTS Cart, metal or tinted glass shelf, optional universal adapter plate,
assembly and screen attachment hardware
UNITS IN PACKAGE 1
PACKAGE SIZE (W x H x D) SR560M: 19.2" x 57.7" x 7.7" (48.7 x 146.6 x 19.5 cm)
SR560G: 19.2" x 57.7" x 7.7" (48.7 x 146.6 x 19.5 cm)
PACKAGE SHIP WEIGHT SR560M: 87.3 lb (38.5 kg)
SR560G: 88.8 lb (40.2 kg)
PACKAGE UPC CODE SR560M: 735029247715
SR560G: 735029247722
WARRANTY Limited 5-year
Flat Panel TV Carts
For 32" to 65" LCD and Plasma Flat Panel Screens
Internal cable management
Incremental tilt
SR560M
SR560G
35.6
(904 mm)
2.96
(75 mm)
26.9
(683 mm)
65
(1651 mm)
13.5"

3215 W. North Ave. • Melrose Park, IL 60160 • [phone] or [phone] • Fax: [phone] • www.peerlessmounts.com
ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
This product is UL Listed. It must be
installed by a qualified professional
installer.
©
UL
USC
Installation and Assembly: 32" - 65" Flat Panel TV Cart
Models: SR1M, SR560M
Max UL Load Capacity:
150 lb (68 kg) screen
50 lb (22.7 kg) per shelf

2 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
NOTE: Read entire instruction sheet before you start installation and assembly.
Table of Contents
Parts List............................................................................................................................................................................ 3, 4
Assembling Cart .....................................................................................................................................................................5
Attaching Universal Adapter Plate or Dedicated Adapter Plate ........................................................................................... 10
Installing Adapter Brackets ..................................................................................................................................................11
Cord Management ............................................................................................................................................................... 13
Tools Needed for Assembly
• level
•phillips screwdriver
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact
your local distributor.
• This product should only be installed by someone of good mechanical aptitude, and fully understands
these instructions.
• Never exceed the Maximum UL Load Capacity on page 1.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws  rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
• The cart is not af xed or secured to the  oor, and may therefore tip over and/or fall if screen and/or stand is shaken
or hit. Always monitor children and do not let children play alone around stand as they could get hurt by a falling
screen. Not recommended for use in areas with heavy traf c.
WARNING

3 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
Before you begin, make sure all parts shown are included with your product.
Parts may appear slightly different than illustrated.
SR1M SR560M
Description Qty. Part Number Part Numbe
r
A
screen mount bracket 1 201-1156 201-1156
Bhook plate 1 201-1157 201-1157
Cshelf support 1 201-1158 201-1158
Dbase 1 009-1223 009-1223
Euniversal plate 1 N/A 201-1110
Fadapter bracket 2 N/A 201-1510
Gupright 1 580-1180 580-1180
Htop cover 1 590-1210 590-1210
I1/4-20 x 12mm decorative screw 14 520-2325 520-2325
J1/4-20mm nut 10 530-1050 530-1050
L3/8-16 x 2.5" socket screw 3 520-9550 520-9550
M7/32" allen wrench 1 560-9715 560-9715
N4 mm allen wrench 1 560-9646 560-9646
O8/32 nylock nut 6 530-1038 530-1038
Pshelf pan 1 009-1225 009-1225
Q6 mm allen wrench 1 560-9716 560-9716
Rleft leg 1 009-1296 009-1296
Sright leg 1 009-1295 009-1295
Twheel caster 2 600-0044 600-0044
Uwheel caster/brake 2 600-0045 600-0045
V
joint connector nut 4 530-1037 530-1037
W
3/8-16 x 1.5" screw bolt 4 520-1329 520-1329
X
M10 x .402 ID lock washer 3 540-9424 540-9424
Z3/16 allen wrench 1 560-0071 560-0071
A
A
M4 x 12 mm serrated washer head socket pin scre
w
6 N/A 510-1079
BB M4 x 25 mm serrated washer head socket pin screw 4 N/A 510-1082
CC M5 x 12 mm socket pin screw 4 N/A 520-1064
DD M5 x 25 mm socket pin screw 4 N/A 520-1122
EE M6 x 12 mm socket pin screw 4 N/A 520-1050
FF M6 x 25 mm socket pin screw 4 N/A 520-1211
GG M8 x 15 mm socket button screw 6 N/A 520-1068
HH M8 x 40 mm socket pin screw 4 N/A 520-1152
II .219 ID x .5 OD x .5 HT spacer 4 N/A 540-1057
JJ .344 ID x .75 OD x .5 HT spacer 4 N/A 540-1059
KK universal plasma tilt multi washer 6 N/A 580-1036
LL M6 x 20 mm socket pin screw 4 N/A 520-9554
MM M6 x 30 mm socket pin screw 4 N/A 520-1067
NN M8 x 25 mm socket pin screw 4 N/A 520-1101
OO M10 x 15 mm socket scre
w
4 520-9262 520-9262
Parts List

4 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
Z
R
S
N
G
D
C
V
U
T
P
H
X
MW
L
OO I
J
O
Q
Parts List continued
MM
GG
Some parts may appear slightly different than illustrated.
AA BB CC HHDD FF
EE
KK
JJ
II LL NN
Universal Adapter Plate, Brackets and Hardware included with model SR560M only
E
F
A
B

5 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
Insert right leg (S) into base housing (D) as shown in  g. 1.1. Then align holes in right leg with holes in base
housing (D). Fasten base housing to right leg using two 3/8-16 x 1.5" bolts (W)and two joint connectors (V). Tighten
using 3/16" allen wrench (Z) and 7/32" allen wrench (M) as shown in  g.1.2.
NOTE: Left and right legs can be identi ed by looking at the cart from the front.
Repeat for left side with left leg (R).
1
S
W
fig. 1.2
V
fig. 1.1
D
S
FRONT OF CART
FRONT OF LEG
2Insert casters (U&T) into holes of support legs (R&S) and hand thread to secure. Attach casters with brake (U)to
the back of left and right support legs (R&S). Attach casters without brake (T) to front of support legs as shown.
NOTE: Lock brakes on casters to avoid sudden movements during installation.
R
UT
S
HAND THREAD
HOLD WHEEL

6 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
L
D
G
X
fig. 3.2
CORD MANAGE-
MENT HOLES
fig. 3.1
Attach upright (G) to base (D), as shown in  g 3.1 using three 3/8-16 x 2.5" socket screws (L) and M10 x .402ID
lock washers (X). Tighten screws using 7/32" allen wrench (M).
NOTE: Be sure cord management holes are in the con guration shown in  g 3.2.
3
Loosely attach four 1/4-20 x 12 mm screws (I) and 1/4-20 nuts (J) to shelf support (C).
4
C
I
J

7 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
Slide shelf support (C) onto upright (G) so that 1/4-20 nuts (J) slide into slots of upright (G) as shown in  gure 5.1
and detail 1. Slide shelf support to desired height, level, then tighten 1/4-20 x 12mm screws (I) using 4 mm allen
wrench (N).
NOTE: MAXIMUM OF TWO SHELVES
Max height of top shelf is 34" from base.
Max height of second shelf is 28" from base.
SLOT
fig. 5.1
C
5
DETAIL 1
J
G

8 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
Attaching Metal Shelf
Attach shelf pan (P) to shelf support (C) using six 8/32 nylock nuts (O) as shown below. Use an adjustable wrench
to tighten six 8/32 nylock nuts (O).
O
P
C
• This shelf is intended for use with equipment weighing
NO more than 50 lbs. (22.7 kg) that  ts evenly accross
the surface of shelf pan (P). Use with other equipment
may result in instability and cause personal injury or
property damage.
WARNING
6

9 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
Insert two 1/4-20 x 12 mm screws (I) into screen
mount bracket (A), leaving 3/16" of exposed thread
as shown in  gure 10.1 and detail 3.
H
G
Snap top cover (H) onto upright (G). 10
9
fig. 10.1
Loosely attach six 1/4-20 x 12 mm screws (I) and
1/4-20 nuts (J) to screen mount bracket (A).
7Slide screen mount bracket (A) onto upright (G) so
that 1/4-20 nuts (J) slide into slots of upright (G) as
shown in  gure 8.1 and detail 2. Slide screen mount
bracket to desired position, level, then tighten 1/4-20
x 12 mm screws (I) using 4 mm allen wrench (N).
8
IA
JA
G
SLOT
fig. 8.1
I
DETAIL 3
3/16"
DETAIL 2
J
G
I
A

10 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
NOTE:Refer to instructions included with
Dedicated Adapter Plate for assembly to screen.
Once attached, proceed to step 11.
Attach Universal Plate (E) or Dedicated Adapter
Plate to hook plate (B) using four M10 x 15 mm
socket screws (OO). Tighten screws using 6 mm
allen wrench (Q).
Attaching Universal Adapter Plate or Dedicated Adapter Plate
Attach hook plate (B) to screen mount bracket (A).
B
A
I
II
2° Backward Tilt 5° Forward TiltNo Tilt
B
UNIVERSAL PLATE
OR
DEDICATED ADAPTER PLATE
(SOLD SEPARATELY, NOT EVALUATED BY UL)
Insert two 1/4-20 x 12 mm screws (I) into holes indicated below for desired screen orientation. Tighten all screws
using 4 mm allen wrench (N).
E
B
11
OO
OO
12
13

11 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
NOTE: "X" dimensions should be equal.
Installing Adapter Brackets to Universal Plate
NOTE: For Dedicated Adapter Plate, see step 11.
To prevent scratching the screen, set a cloth on a  at, level surface that will support the weight of the screen. Place
screen face side down. Refer to screen manufacturers instructions or customer service, for removing any knobs,
base, cover, or screw(s) on the back of the screen to prepare mounting. These need to be removed to allow the
adapter brackets to be attached. Select the small, medium, large or extra large screws from the baf ed fastener
pack then attach adapter brackets to screen following  gure 14.3 or 14.4.
NOTE: Top and bottom mounting holes must be used for attaching brackets. Verify that all holes are properly
aligned, and then tighten screws using a security allen wrench.
FCENTER BRACKETS
VERTICALLY ON BACK
OF SCREEN
X
X
fig. 14.1
14
Notes:
• The number of fasteners used will vary,
depending upon the type of screen.
• Multi-washers and spacers may not be
used, depending upon the type of screen.
• Use the corresponding hole in the multi-
washer that matches your screw size as
shown.
MEDIUM HOLE FOR M5 SCREWS
SMALL HOLE FOR M4 SCREWS
LARGE HOLE FOR M6 SCREWS
MULTI-WASHER
NOTE: For flat back screens proceed to step 14-3. For bump-out or recessed back screen skip to step 14-4
• Tighten screws so adapter brackets are  rmly attached. Do not tighten with excessive force. Overtightening can
cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become
detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque.
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
WARNING

12 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
Begin with the shortest length screw, hand thread through multi-washer and adapter bracket into screen as
shown below. Screw must make at least three full turns into the mounting hole and  t snug into place. Do not
over tighten. If screw cannot make three full turns into the screen, select a longer length screw from the baf ed
fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.
NOTE: Spacers may not be used, depending upon the type of screen.
Begin with longer length screw, hand thread through multi-washer, adapter bracket and spacer in that order into
screen as shown below. Screw must make at least three full turns into the mounting hole and  t snug into place.
Do not over tighten. If screw cannot make three full turns into the screen, select a longer length screw from the
baf ed fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.
For Flat Back Screen
For Bump-out or Recessed Back Screen
14-3
14-4
If you have any questions, please call Peerless customer care at 1-800-865-2112.
If you have any questions, please call Peerless customer care at 1-800-865-2112.
SCREEN
MULTI-WASHER
SCREW
ADAPTER
BRACKET (F)
fig. 14.4
SPACER
ADAPTER
BRACKET (F)
SCREEN
fig. 14.3
MULTI-WASHER
SCREW

13 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-14 01-11-11
Cord Management
Run cords through upright (G) using cord management holes.
16
CORD
MANAGEMENT
G
© 2007 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Mounting and Removing Flat Panel Screen
Hook adapter brackets (F) onto universal plate (E),
then slowly swing screen in as shown. Turn
screws of adapter plate (F) clockwise at least six
times to prevent screen from being removed as
shown in detail 4.
NOTE: Tighten using 4 mm allen wrench (N).
Screen can be adjusted horizontally if desired.
NOTE: It is important to lock screen down! To
lock the screen down, fully tighten screws to adapter
bracket as shown in detail 4.
To remove screen from mount, loosen screws,
swing screen away from mount, and lift screen off of
mount.
• Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television.
WARNING
15
F
DETAIL 4
SCREWS
E
F
E