PEERLESS MIS 213 Guide

ISSUED: 02-02-05 SHEET #: 120-9016-1
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com 1 of 5
Maximum Load Capacity:
75 lb (34 kg)
Model: MIS 213
Read instruction sheet before you start installation and assembly.
Installation and Assembly - Custom Cathedral Ceiling
Adapter for CMJ 455
• Installer must verify that the ceiling will safely support
fourtimesthecombinedweightofallattachedequip-
mentandhardware.
WARNING

ISSUED: 02-04-05 SHEET #: 120-9016-1
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com 2 of 5
AB
D
CEF
Description Qty. Part #
Aceiling bracket 2 055-2486
Bflush mount tube 2 580-0004
C1/4-20 x 5/8" carriage bolt 4 520-1175
D1/4-20 nylock nut 4 530-2002
E1/4" ID x 3/4" OD washer 4 540-9444
FM5 x .8 x 10 mm phillips self-tapping screw 2 520-2005
Parts List

ISSUED: 02-02-05 SHEET #: 120-9016-1
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com 3 of 5
Note:RefertoCMJ455instructionsforattachmentofCMJ455toceiling.
Screw ceiling bracket (A) and flush mount tube (B) into threaded fitting of CMJ 455 and align slot of flush mount tube
withoneoftheholesinthreadedfitting.ThreadM5x10mmself-tappingscrew(F)throughthreadedfittingintoflush
mount tube as shown in detail 1.
A
B
F
Insertflush mount tube (B) from the bottom, and thread flush mount tube into threaded fitting of ceiling bracket (A).
B
THREADED
FITTING
A
CMJ455
THREADED
FITTING
DETAIL 1
SLOT

ISSUED: 02-04-05 SHEET #: 120-9016-1
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com 4 of 5
Attachupper ceiling bracket (A) to lower ceiling bracket(A)byinsertingfour carriage bolts (C) through holes of
ceiling brackets. Fasten bolts with four washers (E) and nylock nuts (D) as shown.
Note: Adjust lower ceiling bracket until it is level before tightening nuts (D).
DE
C
A
A
Note:Skip this step if you are installing an extension column.
For flush mount installation Insertflushmounttube (B) from the top, and thread flush mount tube into threaded
fitting of second ceiling bracket (A).
B
THREADED
FITTING
A

ISSUED: 02-02-05 SHEET #: 120-9016-1
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com 5 of 5
For 1-1/2" Extension Column Application (EXT or ADJ series) Screw
extension column into threaded fitting of lower ceiling bracket (A) and align slot
of extension column with one of the holes in threaded fitting. Thread M5 x 10
mmself-tappingscrew(F)throughlowerceilingbracket into extension column
as shown in detail 2.
Note: 3/4" extension column (FLP series) can be used in place of the EXT or
ADJseries.Two pipereducers(ACC913)are requiredforinstallingthe3/4"
column.
A
EXTENSION
COLUMN
DETAIL 2
SLOT
©2005PeerlessIndustries,Inc. Allrightsreserved.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
F
THREADED
FITTING