PEI Enviro-Septic/SimpleSeptic Template 1A 2003 User manual

How To Use This Template, Continued
Procedure 2 Follow these steps to use the template to draw a
end view sloping system end view.
Step Action
1
Use the % slope tool as a protractor to create a
desired percentage of slope.
Example:
BaseLine
2
Use the pipe end view cutouts to draw end
views of lines of pipe on the slope.
Example:
BaseLine
3
Use the % slope tool to add the same
percentage of slope line as used in step 1 over the top of
the sloped pipes.
Example:
Base Line
4
Add a slope ratio line to each side of the
system.
Example:
BaseLine
Curved The bend tools indicate the
configuration maximum pipe bends in 1”-10’ and 1”-20’ curved
configurations.
Maximum bend at 1”-20’
Enviro-Septic®U.S. Patent Nos. 6,461,078; 5,954,451; 6,290,429 with other patents pending.
Canadian Patent Nos. 2185087; 2187126 with other patents pending. Simple-Septic®U.S.
Patent No. 5,606,786. Presby Maze®U.S. Patent No. 5,429,752.
Enviro-Septic®, Simple-Septic®, and Presby Maze®are registered trademarks of Presby
Environmental Inc. Multi-LevelTM , is a trademark of Presby Environmental, Inc.
© 2003 Presby Environmental, Inc. All rights reserved. Publication date: July 2003
13b
13b
10
13a
123
Instruction Manual for use with
the Enviro-Septic®/Simple-
Septic® Template 1A 2003
Template 1A 2003
Purpose This Enviro-Septic®/Simple-Septic® Template 1A
2003 is a drawing aid for our septic system designs.
This tool is used to accurately draw pipe and system
layouts in top and end views, and also to draw
sloping and curved configurations.
Prerequisite System length and pipe spacing are required to use
this template. Use our “Enviro-Septic®& Simple-
Septic® Leaching Systems Design and Installation
Manual” and your State Attachment to calculate these
figures and other essential data.
PRESBY ENVIRONMENTAL, INC. 2003
/SIMPLE-SEPTIC
®
TEMPLATE 1A 2003
PRESBY ENVIRONMENTAL, INC
BOX 617
SUGAR HILL, NH 03585
TEL: [phone]
4'DIA.
SM. TANK
2.75'
2.5'
2.25'
2.5'
2.75'
3.5'
10 1" = 10'
20 30
2.75'
4'
3.5'
3'
1.75'
1.75'
1.5'
2.5'
5
2.25'
2'
2'
1" = 5'
1.5'
10
15
3.5'
ENVIRO-SEPTIC
4.5'
5' ©
3' DIA.
1.75'
2'
1.5'
2.25'
20 1" = 20'
40 60
2:1
MAX. BEND 1" = 10'
40 5'
5'
5:1
4:1
3:1
55
®
%OFSLOPE
SLOPERATIO
5' DIA.
35
15
5
25
45
1" = 20'
MAX. BEND
10'
LG. TANK
80
D-BOX LG
D-BOX SM
PRESBY ENVIRONMENT
A
L, INC.
INNOVATIVE SEPTIC TECHNOLOGIES
Route 117 • PO Box 617 • Sugar Hill, NH 03585
Tel: [phone] • Fax: [phone]
www.PresbyEnvironmental.com

Template 1A 2003 Parts and Functions
Description Here are the template parts.
Parts table Here are the template parts and their functions.
Part # Name Function
1 1”-20’ Rule Scales 1” to equal 20’.
2 Pipe Cutout Draws pipe at 1”-20’ in 10’ increments.
3 1”-20’ Bend Indicates the maximum bend for a 10’
piece of pipe at 1”-20’.
4 Septic Tanks Draws septic tanks at 1”-20’.
5 D-Boxes Draws distribution-boxes at 1”-20’.
6 Pipe Spacing Spaces pipe ctr-to-ctr distances at
1”-20’.
7 Round Tanks Draws tanks/pump chambers at 1”-20’.
8 1”-5’ Rule Scales 1” to equal 5’.
9 Raised
Connections
Draws raised connections at 1”-20’.
10 Pipe End
View
Draws pipe end views ctr to ctr distances
at 1”-10’.
11 1”-10’ Rule Scales 1” to equal 10’.
12 1”-10’ Bend Indicates maximum bend for a 10’ piece
of pipe at 1”-10’.
13 Slopes Draws slopes in ratios and percentages.
PRESBY ENVIRONMENTAL, INC. 2003
/SIMPLE-SEPTIC
®
TEMPLATE 1A 2003
PRESBY ENVIRONMENTAL, INC
BOX 617
SUGAR HILL, NH 03585
TEL: [phone]
4'DIA.
SM. TANK
2.75'
2.5'
2.25'
2.5'
2.75'
3.5'
10 1" = 10'
20 30
2.75'
4'
3.5'
3'
1.75'
1.75'
1.5'
2.5'
5
2.25'
2'
2'
1" = 5'
1.5'
10
15
3.5'
ENVIRO-SEPTIC
4.5'
5' ©
3' DIA.
1.75'
2'
1.5'
2.25'
20 1" = 20'
40 60
2:1
MAX. BEND 1" = 10'
40 5'
5'
5:1
4:1
3:1
55
®
%OFSLOPE
SLOPERATIO
5' DIA.
35
15
5
25
45
1" = 20'
MAX. BEND
10'
LG. TANK
80
D-BOX LG
D-BOX SM
13a
13b
12
11
9
8
7
5
4
3
2
1
9
6
10
How To Use This Template
Procedure 1 Follow these steps to use the template to draw a
top view system top view.
Step Action
1
Use the pipe spacing holes to make dots to align
lines of pipe.
Example:
Note: Use multiples for unincluded spacings. For
example, every other dot of 1.5’ equals 3.0’ spacing.
2
Use the pipe cutout and draw lines of pipe on the
aligned dots.
Example:
3
Use the raised connections cutouts to draw raised
connections.
Example:
4
Use the septic tanks cutouts to add a septic tank.
Example:
5
Use the round tanks cutouts to add a pump
chamber and the D-Box cutouts to add a
distribution box.
Example:
continued
6
2
9
4
5
7
2.5’