Pelsue LG5 Series User manual

Part #500995-001
Product Manual:
#LG5 Series
Manhole Guard Retrieval System
T.A. Pelsue Company
2500 South Tejon Street
Englewood, Colorado, USA 80110
Tel. [phone] or 303-936-7432
Fax. [phone]
Internet: www.pelsue.com
Email: [email protected]
ISO 9001 Certified

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
Page 2

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018 Page 3
Since our inception in 1963 – the T.A. Pelsue Company has designed and manufactured high
quality equipment to improve the personnel e-
ciency and working conditions in various under-
ground, conned, and outdoor areas.
Founded by T. Allen Pelsue, the company has estab-
lished a continuing reputation for excellence in the
production of ne products for a broad spectrum of
industry throughout the world.
Now, in our second generation of family direction,
continued commitment to innovation and quality
makes Pelsue a leading source of equipment for
many types of conned spaces. We specialize
in safety, retrieval, fall arrest, ventilation, cable
placing, splicing, and maintenance nationally and
abroad. With more than 70,000 square feet of facil-
ities available, Pelsue continues the dedication that
has made us pre-eminent in this eld.
ISO 9001 Certified

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
Page 4
Table of Contents
Section Description Page #
1.0......................................General Information.................................. 5
1.1...........................Quality Policy
1.2...........................Pelsue Product Warranty
2.0......................................Introduction & Product Information........ 7
2.1...........................Serial Number

3.1...........................Label Locations
4.0......................................Safety..........................................................10
4.1...........................Warning Statement
4.2...........................Safety Alert Symbol
4.3...........................General Safety Information
4.4...........................Operating Safety
4.5...........................Maintenance Safety
4.6...........................New Operator Safety Information
5.0......................................Product Operation.....................................13
5.1...........................Product Description & Capabilities
5.2...........................Product Installation & Set-Up
5.3...........................Product Operation
6.0......................................Maintenance & Inspection........................17
6.1.......................... Maintenance
6.2.......................... Inspection
6.3...........................Inspection Log
7.0......................................Storage.......................................................21

9.0......................................Contact Information.................................. 25

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018 Page 5
1.0 General Information
T.A. Pelsue Company
Quality Policy
OUR GOAL IS THE PURSUIT OF NEVER-ENDING IMPROVEMENT IN
PRODUCT QUALITY AND BUSINESS SYSTEMS.
METHODSTOBEEMPLOYEDINATTAININGTHISGOALWILLINCLUDE
NEW PRODUCT QUALITY PLANNING, EMPLOYEE TRAINING, AND
UTILIZATION OF EMPLOYEE INVOLVEMENT GROUPS TO SOLVE
PROBLEMS.
IN AN INCREASINGLY COMPETITIVE MARKETPLACE, ENSURING
CUSTOMERSATISFACTIONISONEOFTHEDIFFERENTIATORSTHAT
SETS YOU APART FROM THE PACK AND YIELDS A COMPETITIVE
ADVANTAGE.
THEREFORE,WEWILLSUPPORTTOTALCUSTOMERSATISFACTION BY
IMPLEMENTING THE  AND PROVIDING
THE NECESSARYATMOSPHEREAND TRAINING TO NURTURE THIS
CONCEPT THROUGHOUT OUR ORGANIZATION.
WEWILLMAKEEVERYBUSINESSDECISIONASTHOUGHTHE QUALITYOF
THE PART OR SERVICE PROVIDED WAS DESTINED FOR OUR OWN
OR OUR FAMILY’S USE. WE WILL ALWAYS THINK 
EVERYT.A.PELSUECOMPANYEMPLOYEEISEXPECTEDTOCOMMITTO
THISPHILOSOPHYINTHEPERFORMANCEOFHISORHERDAILYTASKS.
QUALITY FIRST!
T.A. PELSUE COMPANY SENIOR MANAGEMENT TEAM
1.1 Quality Policy

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
Page 6
1.2 - Pelsue Product Warranty
Pelsue products are designed and engineered to perform as stated in published specications.
Quality materials and workmanship are used in the manufacture of this product. With regular
maintenance and proper care, Pelsue equipment provides many trouble free hours of opera-
tion.
The T.A. Pelsue Company warrants to the buyer that the Hoist Product furnished will conform
to specications and will be free from defects in material and workmanship from the date of
shipment to the original buyer, for a period of 3 months (90 days). In the event of failure of any
components of a Pelsue product within the warranty period, service must be pre-approved by
the T.A. Pelsue Company, and service must be performed by the T.A. Pelsue Parts and Ser-
vice Department in Englewood, Colorado, or at the option of the T.A. Pelsue Company, service
may be performed at any designated service center, which may include any authorized service
center for the component manufacturer. Unauthorized repairs will not be covered by this war-
ranty.
Damage or failure due to misuse, mishandling, or unauthorized modications will not be covered
by this warranty. Unless otherwise agreed, the T.A. Pelsue Company shall repair or replace the
defective components within (30) calendar days of notice of failure. T.A. Pelsue Company’s
obligation hereunder, shall be limited to the repair or replacement of the product or component
as set forth above and shall not include any liability whatsoever for damages caused by such
failure, including, but not limited to consequential or incidental damages owing from use or
lack of use of product.
Any replacement, repair, modication, installation, or other service performed by the T.A. Pelsue
Company shall be warranted by the remainder of the unexpired period of the warranty, or for a
period of (90) calendar days, whichever is longer.
All materials or parts returned for credit or warranty shall be returned only with prior approval,
and will be subject to factory inspection before credit is allowed, Parts claimed defective will
be replaced upon request and will be invoiced as purchased, subject to credit when the parts
claimed to be defective have been received and examined by the factory.
This warranty is expressly in lieu of all other warranties expressed or implied, including any
warranties of merchantability or warranties of tness for any particular use and all other obliga-
tions or liabilities in connection with the sale of this equipment.
T.A. Pelsue Company, 2500 South Tejon Street, Englewood, Colorado 80110, 800-525-8460

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018 Page 7
2.0 - Introduction & Product Information
Upper Assembly Guard
MODEL:_____________________ _____________________
Serial Number :________________ _____________________
Date of
Manufacture (DOM):______________ _____________________
Congratulations on your choice of a Pelsue Model #LG5 Manhole Guard Retrieval System to compliment your con-
ned space entry/retrieval operation. This equipment has been designed and manufactured to exceed conned space
requirements and regulations in order to meet the needs of the discriminating operator for the e󰀩cient and safe entry or
retrieval of personnel from a conned space.
Safe, e󰀩cient and trouble-free operation and maintenance of the system requires that anyone who will be operating,
maintaining, or inspecting the equipment, read, understand and follow all the operation, safety, maintenance, and inspec-
tion instructions contained within this manual. This manual covers the Pelsue Model #LG5 Manhole Guard Retrieval
System. Use the Table of Contents as a guide to nd specic information.
Keep this manual handy for frequent reference and to pass on to new operators. Establish a regular training program
for experienced and new operators per this manual. Establish a regular maintenance and inspection program to keep
the equipment in top condition.
This product is a part of a man rated conned space
entry/retrieval system. The user must read, understand
and follow the instructions contained in this manual
for each component or total system before using
this equipment. Establish an appropriate training,
maintenance and inspection program for your people
and the equipment. Failure to follow these instructions
could result in serious injury or death.
2.1 - Serial Number

Always give your dealer the serial number of your Pelsue
conned space entry/retrieval product when ordering parts or
requesting service or other information.
The serial number decal is permanently embossed with a serial
number. The serial number decal will appear as shown in
Figure 2a at the bottom. On the upper section it will be located
on one of the front vertical legs (see Fig. 2b). On the lower sec-
tion it will be located on the top rear cross bar (see Fig. 2c). A
space has been provided below for the recording of the serial
numbers for future reference.
Figure 2a: Serial
Number Decal
Fig. 2b: Upper Assembly
Serial Number Decal Location
SERIAL
NUMBER
LOCATION
Fig. 2c: Guard
Serial Number Decal Location
SERIAL
NUMBER
LOCATION

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
Page 8
3.0 - Conguration & Assembly
Upon initial receipt of the Manhole Guard Retrieval System inspect the packaging for any evidence that the product may
have been damaged in shipment. While unpacking the product, inspect all of the components for damage. If damage
to any of the components is discovered, DO NOT USE THE PRODUCT! Alert the shipping carrier immediately of the
damage to the shipment.
Verify that all parts are present before completing assembly.
The Carabiner and Pulley will not be installed on the upper assembly upon receipt. To fully assemble the upper sec-
tion,
1. Secure the Screw Lock Carabiner (#1) to a Swivel Eye located on the Hub of the upper section by unscrewing the
screw lock on the Carabiner, and hooking through the Swivel Eye.
2. Hook the Cable Ready Pulley (#2) onto the Carabiner (#1) and fully tighten the Screw Lock on the Carabiner.
**Refer to parts list above if replacement parts are required. Replacement parts can be ordered from the T.A. Pelsue
Company at 800-525-8460.
ITEM# PART# DESCRIPTION
LG5-TA 500909-001 LG5 UPPER SECTION
1. P102 CARABINER - GALVANIZED STEEL, SCREW LOCK
2. P025 PULLEY - CABLE READY, 2-1/2” TREAD, ALUMINUM
LG5-GA 500885-001 LG5 LOWER SECTION
2
1
LG5-TA FOLDED ORIENTATION
Figure 3.0: #LG5 Series
Conguration Diagram
LG5-GA FOLDED ORIENTATION
LG5-TA DEPLOYED ORIENTATION
LG5-GA DEPLOYED ORIENTATION

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018 Page 9
3.1 Label Locations
3) 500234-001
1) 102072-002
Figure 3.1a: #LG5-TA
Label Locations
Figure 3.1b: #LG5-GA
Label Locations
1
2
3
1
2) 500997-001

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
Page 10
The following section will address the safety precautions which must be adhered to when working with Pelsue conned
Space Safety equipment such as the #LG5 Series Manhole Guard Retrieval System. Any user must familiarize them-
selves with the information in this section before utilizing the equipment.
SIGNAL WORDS:
Note the use of the signal words ,  and  with the safety messages. The appropriate signal
word for each message has been selected using the following guidelines:
D Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury. This
signal word is to be limited to the most extreme situations or for hidden or unseen hazards.
 Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury and
includes obvious and hidden hazards. It may also be used to alert against unsafe practices.
 Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It
may also be used to alert against unsafe practices.
You are responsible for the safe operation, maintenance and inspection of your Pelsue #LG5 Manhole Guard Retrieval
System. You must ensure that anyone who will operate, maintain, inspect or work around the equipment be familiar
with the operating and maintenance procedures and related safety information contained in this manual. This manual
will take you step-by-step through the workings and capabilities of the #LG5 Manhole Guard System and alert you to all
good safety and operating practices while using the system.
Remember, you are the key to safety. Good safety practices not only protect you but also the people around you. Make
these practices a working part of your safety program. Be certain that everyone operating this equipment is familiar with
the procedures recommended and follows safety precautions. Remember, most accidents can be prevented. Do not risk
injury or death by ignoring good safety practices.
• System owners must give operating instructions to operators or employees before allowing them to use the
equipment and at least annually thereafter.
• The most important safety device on this equipment is a safe operator. It is the operator’s responsibility to read
and understand all safety and operating instructions in the manual and to follow these. Most accidents can be
avoided.
• A person must understand the operation of this equipment and be trained in it’s usage before operating the
equipment. An untrained operator exposes himself and others to possible serious injury or death.
• Do not modify the equipment in any way. Unauthorized modication may impair the function and/or safety and
could a󰀨ect the life of the equipment.
• Think SAFETY! Work SAFELY!
4.0 - Safety
4.1 - Warning Statement
WARNING!
Products manufactured or sold by the T.A. Pelsue Company are
intended for use by professionals trained and experienced in the
use, inspection and maintenance of these products.
Paraprofessional users such as volunteer rescue workers and
sportsmen involved in risk sports such as climbing and caving will
be held to the same standard of experience and training as profes-
sionals.
Technical rescue, repelling, climbing and the training involved are
hazardous activities. Each situation has its own unique conditions
and must be evaluated. E󰀨ective risk management comes from
experience, proper training and good personal judgement.
7!2.).'

Failure to read and heed all labels and instructions may
result in injury or death. Inspect all components before
and after each use, and remove from service if any
damage or defect is found. Keep product free from dirt
and moisture. Do not leave a suspended load
unattended. Do not exceed maximum rated loads.

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018 Page 11
SAFETY ALERT SYMBOL
This Safety Alert symbol means  

The Safety Alert symbol identies important safety messages
on your Pelsue Retrieval Product and in the manual. When
you see this symbol, be alert to the possibility of personal
injury or death. Follow the instruction in the safety mes-
sage.
Why is this symbol important to you?
 
 
 
4.2 - Safety Alert Symbol
4.3 - General Safety Information
1. Read, understand, and follow the Product Manual and all safety signs before using, maintaining or inspecting the
equipment.
2. Refer to and follow applicable standards and regulations. Comply with requirements of local regulations for your
applications.
3. Establish an equipment-use training program for inexperienced employees. Only trained, competent persons shall
use the equipment. An untrained operator is not qualied to operate the system.
4. Have a rst-aid kit available for use should the need arise and know how to use it.
5. Provide a re extinguisher for use in case of an accident. Store in a highly visible place.
6. Install and properly secure all guards and shields before operating.
7. Wear appropriate protective gear. This list includes but is not limited to:
• A hard hat
• Protective shoes with slip resistant soles
• Heavy gloves
• Protective clothing
• Face Protection
8. Review and follow the Pre-Operation Checklist before using a component in the system or the system itself.
9. Establish a regular maintenance and inspection program with your equipment and maintain detailed records.
10. Review safety related items and operating instructions with all personnel on a regular basis.
4.4 - Operating Safety
1. Read, understand and follow the User Manual and signs on the product before using, maintaining or inspecting the equip-
ment.
2. Train all operators before allowing them to use the product. An untrained operator exposes themselves, bystanders
and workers to possible serious injury or death.
3. Visually inspect the product and all auxiliary components and equipment before using. Correct any problems before
using the equipment.
4. Securely anchor the product before using.
5. Use only certied anchor and connector components in your system.
6. Use only an approved full body harness for the workers.

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
Page 12
4.4 - Operating Safety (continued)
4.5 - Maintenance Safety
1. Read, understand and follow the User Manual and signs on the product before using, maintaining or inspecting the equip-
ment.
2. ANSI and OSHA require a regular inspection program for all conned space entry/retrieval equipment and to main-
tain documented results of these inspections. Follow the inspection procedure contained in this manual and use
the inspection form to document the results (see section 6.0).
3. Keep instructional and safety signs clean and legible at all times. Clean or replace as required.
4. Remove the equipment from service if a problem is found during the inspection. Return to an authorized repair depot
or the factory for service.
The Pelsue #LG5 Series Manhole Guard Retrieval Systems are designed to assist a person/entrant in entering a con-
ned space and assist in exiting if required. Every new operator must read, understand and follow the instructions in the
manual. No one should be allowed to use the equipment without training. The training should be reviewed with experi-
enced operators on a regular basis. At regular intervals, perform a detailed inspection of the equipment and document
the results. Remove from service if deciencies are found. Alterations or misuse of this equipment or failure to follow
instructions may result in serious injury or death.
It is the responsibility of the owner’s organization or operator to read this manual and to train all other operators before
they start working with the equipment. Follow all safety instructions exactly. Safety is everyone’s business. By following
recommended procedures, a safe working environment is provided for the operator, bystanders and the area around
the work site. Untrained operators are not qualied to operate the equipment.
Many features incorporated into this equipment are the result of suggestions made by customers like you. Read this
manual carefully to learn how to operate the equipment safely and how to set it to perform as intended. By following the
operating instructions in conjunction with a good maintenance program, your product will provide many years of trouble
free service.
4.6 - New Operator or Owner
7. Always work in teams. One person is to work in the conned space (entrant) and the other is to attend to the entrant
(attendant). Pelsue recommends an additional attendant/rescuer for stand-by in case of an emergency.
8. Do not exceed the capacity of the system at any time (see section 5.1).
9. Establish a regular training program for new and experienced workers.
10. Establish a detailed inspection program for your equipment and document the ndings. Return the equipment to
the manufacturer for repair if any problems are found.
11. Plan your work program before starting. Have the required people, equipment and procedures available to do the
job.
12. Do not use the equipment around physical or environmental hazards. This list includes but is not limited to:
• Corrosion that may a󰀨ect the structural integrity of the lifeline or other components.
• Chemicals which can degrade components in a manner which can not be visually identied.
• Toxic gases: Rescuers or workers can be killed in toxic environments.
• Heat or elevated temperatures.
• Moving machinery: Workers or auxiliary equipment can be contacted by or pulled into moving components.
• Sharp edges: Workers or the rescue equipment can be injured by or damaged by sharp edges or components.
• Electrical hazards: Stay away from power lines or components carrying electrical power.
• Overload: Do not overload the system at any time during operation (see section 5.1).
• Follow conned space regulations and standards.

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018 Page 13
5.0 - Product Operation
The Pelsue #LG5 Series Manhole Guard Retrieval Systems are built from structural aluminum, and have several steel
and/or engineered plastic components. LG5 Manhole Guard Retrieval Systems are specically designed for conned
space entry and/or rescue & retrieval applications. All specications, instructions, and procedures provided within this
manual or upon Pelsue Specication Documents are based upon and only valid for usage with a Pelsue Manhole Guard
Retrieval System approved accessories. The T.A. Pelsue Company can not verify equipment safety and/or compliance
when utilized with anything other than Pelsue approved LG5 Series accessories.
Manhole Guard Retrieval System - #LG5 Series

• System Footprint - 42” x 42”
• Overall Height - 78-1/2”
• Structure Weight - Upper Section 41.8 lbs
Lower Section 35.5 lbs
Load Rating & Compliance (2 applications)
1. Rated for personnel lifting or lowering applications for a single user.
• Man Rated Load Capacity.....Single User of 350 LBS. (159 KG.)
Maximum Weight
2. As an anchorage for a personal fall arrest system
Warning! A 900 LB. maximum arrest force (MAF) fall arrest device
must be used when system is employed as part of a complete fall
arrest system.
**Refer to loading diagrams for proof load
5.1 - Product Description & Capabilities
The following section will address the capabilities and the general operation of the Pelsue #LG5 Series Manhole Guard
Retrieval System. The instructions contained within this section should be adhered to each and every time the product is
used. Any person tasked with installing or operating the piece of equipment should be familiar with these procedures.
Figure #5.1a: #LG5 Series
The load rating given here may supersede
any load rating reported for an installed winch
and or pulley system.
! CAUTION ! - The user must ensure that the ground area utilized for operation is capable of
withstanding the weight of the system combined with the system proof loads in order to retain
the stated compliance of the entire system.
! CAUTION ! - The user must ensure that the ground area utilized for operation is relatively
level and debris free in order to retain the stated compliance and stability of the entire system.
! CAUTION ! - The user must ensure that the guard locking arms are locked in place and that the chain on the
Upper Assembly are secure and intact in order to retain the stated compliance of the entire system.
Materials & Construction
• Main Structure: - Structural Aluminum
- Carbon Steel
(Powder coated)
• Chains - Zinc Plated Steel
• Hardware - Grade 5 & Grade 8 (plated)

• Easily assembles over most manholes for safe and
secure lifting and/or placement of personnel
• Provides a multiposition winch mount compatible
with many winch and fall arrest Systems
• Constructed primarily of lightweight & Corrosion-
resistant powdercoated Aluminum & Steel
• Highly durable T-Handle latches located at each leg
to secure upper assembly to guard assembly

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
Page 14
Prior to Operation, the #LG5 Series Rescue & Retrieval Manhole
Guard System should be congured and prepared according
to the following guidelines.
1. Pre-Operation Inspection:
It is necessary to perform a visual inspection, each time, prior to using
the product. If deciencies are found, remove the product from service
and contact the T.A. Pelsue. regarding repair. The following checklist
coupled with Figure #5.2a should be used as a guide to determine
whether the equipment is in good operating condition prior to usage.
Equipment that is not in good condition can endanger the safety of
the entrant and attendant during use.
The Pre-Operation Visual Inspection is not limited to, but must include
the following items;
a. Check that all the cross bars are straight and that all welds do not
have cracks or fractures. Be certain that all cross bars are solidly
mounted & secure.
b. Check that the rear locking arm is securely attached and pivots
freely
c. Check that the apex-mounted anchor-points are fastened securely
to the apex structure, and swivel freely.
d. All leveling feet are present and adjustable.
e. All T-Handle latches are secured to the system and undamaged.
f. Verify that the Restraining Chain on the Upper Assembly is intact
and secure. Verify that the safety chains are present on the guard.
(Note: The safety chains on the guard are not meant to be a load
bearing mechanism.)
5.1 - Product Description & Capabilities (continued)
5.2 - Product Installation & Set-up
Figure #5.2a: #LG5 Series
Pre-Operation Inspection Points

• #LG5 Series Guard System must be set on a level surface prior to use.
• In order to ensure compliance, it is the user’s responsibility to ensure that the supporting surroundings are capable
of withstanding all of the loads imparted to it by the proof-loaded #LG5 Guard System.
• #LG5 Series are only to be utilized within the guidelines and ratings presented in this manual and only by personnel
who are trained in the operation of this equipment as well as the practices of general conned space safety.
APEX HUB
LOCKING
ARM
SAFETY
CHAINS
3100 LB.
[1406 KG]
PROOF LOAD
TEST LOAD
APPLIED AS
SHOWN
Figure 5.1d: LG5
Loading Diagram
Conguration 3
TEST LOAD
APPLIED AS
SHOWN
3100 LB.
[1406 KG]
PROOF LOAD
Figure 5.1c: LG5
Loading Diagram
Conguration 2
5000 LB.
[2268 KG]
PROOF LOAD
Figure 5.1b: LG5
Loading Diagram
Conguration 1
TEST LOAD
APPLIED AS
SHOWN
LEVELING FEET
UPPER ASSEMBLY
RESTRAINING CHAIN
T-HANDLE
LATCHES

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018 Page 15
Figure #5.2c: #LG5 Series
With Two Legs Installed.
2. Setup of LG5 System:
Choose a location where installation will provide suitable proximity to the work area yet minimize obstructions during use
and in the event a rescue is necessary. Once a location is chosen;
a. Place the lower assembly on a secure at surface. Allow the rear set of locking arms to be locked in place by folding them
down onto their corresponding perpendicular rails (Refer to Fig #5.2b).
b. Approach the open side of the lower assembly with the left steel leg of the upper section in one hand and the opposite
aluminum leg in the other hand. Simultaneously place the insert of the steel leg into the front left corner post of the lower
section and the insert of the aluminum leg into the opposite corner post. You can now let go of the upper assembly and
it will stay upright (Refer to Fig #5.2c). Walk around the system placing the upper legs into the corresponding guard
corner posts (Refer to Fig. #5.2d).
c. After the upper and lower sections have been fully deployed and connected, level the system using the leveling feet
on the bottom of the lower section at each corner post. (Refer Fig. 5.2e) The maximum allowable extension for the
leveling feet is 4”, measured from the bottom of the guard corner post to the ground. Full thread engagement is
critical to maintain the integrity of the system.
d. Safety Chains can be secured to the tabs on the lower section if desired. T-Handle latches can also be secured
if desired. (Refer Fig. 5.2e) Pull the T-Handle (attached to the upper legs) down and onto the keeper (attached to
guard). (Refer Fig. 5.2f & 5.2g)
e. Disassembly is reverse of assembly steps.
Figure #5.2b: #LG5 Series Lower Section
In Unfolded Locked Position
STEEL LEGS
Figure #5.2d: #LG5 Series
Upper Section Installed.
!WARNING! - The user must
ensure that the locking bar is cor-
rectly installed in order to prevent
damage to the product and injury to
the operator.
5.2 - Product Installation & Set-up (continued)
Figure #5.2e: #LG5 Series
Completely Installed.
TABS
LEVELING
FEET
T-HANDLE
LATCHES
Figures #5.2f & #5.2g: #LG5 Series
Front & Rear T-Handle Latches
T-HANDLE
KEEPER

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
Page 16
Figure #5.3a:
#LG5 Over Manway
5.3 - Product Operation
1. Operation of LG5 System:
Before operation of the LG5 System can occur, the user must choose one of three
congurations in which to use the system. The conguration should be chosen and
congured before the user can enter the manway.
Ensure that the system is secure and level before working over the manway.
Ensure that the system is centered over the manway.
Conguration 1
A Standard SRL (Self Retracting Lifeline) can be connected directly to one of the
Anchor Points on the Apex Hub (Fig. #5.2b) providing a compliant overhead fall
arrest anchorage.
- To connect the SRL to the Apex Hub, utilize the SRL’s connector to secure the
device to one of the two overhead anchor points; (can be used in combination with
Conguration #3 to provide full retrieval capability.
Conguration 3
A hoist accessory bracket (#LGL-B) can be purchased from Pelsue. This acces-
sory enables the use of a standard personnel hoist. Please refer to Section 8.0
for a detailed description
Conguration 2
A 3 Way SRL (Self Retracting Lifeline) device can be connected directly to one of
the front vertical legs on the lower section of the LG5 (Fig. #5.3c).
- The channel bracket that is integral to the 3 way SRL will slide over the leg and
rest on the SRL Stops that are on the lower guard (Fig #5.3d). After the device is
rested on the SRL Stops, the two Hitch Pins should be inserted through the holes
on the bracket and the holes on the vertical leg to hold the 3 way SRL in place
(Fig #5.3e). The provided Pulley and Carabiner should be connected to one of the
Anchor Points on the Apex Hub. The line will then be reeved from the 3 Way SRL
through the Pulley and then towards the manway.
Figure #5.3b:
Conguration 1
Figure #5.3c:
Conguration 2
SRL Stops
3 way SRL
Hitch Pins
Figure #5.3d:
3 Way SRL Installation
Figure #5.3e:
3 Way SRL Installation
Standard SRL
3 way SRL

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018 Page 17
MAINTENANCE & INSPECTION
6.0 - Maintenance & Inspection
1. Read, understand and follow the Product Manual and signs
on the product before using, maintaining or inspecting the
equipment.
2. ANSI and OSHA require a regular inspection program
for all conned space entry/retrieval equipment and to
maintain documented results of these inspections. Follow
the inspection procedure contained in this manual and
use the inspection form to document the results.
3. Keep instructional and safety signs clean and legible at
all times. Clean or replace as required.
4. Remove the equipment from service if a problem is found
during the inspection. Return to an authorized repair depot
or the factory for service.
6.1 - Maintenance
For the most part, the Model #LG5 is intended to be a maintenance-free piece of equipment, however several steps can
be taken to keep the system in top-notch working order and also extend the working life of the product.
Before Each Use:
1. Visual Inspection: Perform a complete visual inspection. Refer to section 6.2 for guidelines and take any
maintenance steps that are necessary.
Annually:
1. Clean Product: Use a damp cloth and mild soap to clean the structure and labels of dirt and residue. Be sure
the labels are legible (replacements are available from Pelsue)
2. Complete Inspection: Perform a thorough inspection, paying attention to the bullet points provided within
section 6.2. Record results and keep documentation. A log has been provided in section 6.3 specically for
the recording of the dates & results of annual system inspections.
Periodic Factory Service Inspection: It is recommended that the product be serviced by a factory authorized
service center or the manufacturer after a period of three years. Extreme working conditions may indicate
the necessity to increase the frequency. Factory servicing shall include but not be limited to an intensive
inspection and cleaning of all internal and external components. Failure to provide proper service may shorten
product life and could endanger performance or function.
When completing an inspection of the Model #LG5 Manhole Guard Retrieval System, the following specic items should
be checked;
1. Labels:
Check that all the labels are clean and legible (Refer to Section 3.1). Clean the labels if any are dirty using mild
soap and a damp cloth. Replace if any are illegible. Decals & labels provide valuable warning and caution infor-
mation applicable to product usage and limitations, and should be visible and present at all times.
2. Fasteners:
Check that all screws and other fasteners are present and secure. Note that not all fasteners are tightened to their
maximum allowable torque. This is done in order to allow for pivoting and folding motions in certain components.
Over-tightening of fasteners can interfere with the operation of the device and can damage the structure.
All fasteners on the Model #LG5 system are of a self-locking design. Bolt threads should extend all the way though
their locking nuts. If any fasteners have appeared to “back-out” or loosen the product should be removed from
service until the problem can be identied and corrected.
6.2 - Inspection

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
Page 18
6.2 - Inspection (continued)
3. Overhead Anchor Points:
Ensure that the two overhead anchor points swivel freely and that there is no binding in their range of motion.
Also, visually inspect the anchor lugs for any sign of deformation. The anchor lugs can elongate and stretch if
overloaded beyond the capacity of the system. Any Model #LG5 system exhibiting deformation in the anchor lugs
should be removed from service immediately.
4. Structure:
The entire product structure should be checked for cracks, dents, bends or breaks. If there are major dents or any
other structural damage, the unit should be removed from service and returned to the factory for repair.
• Pay special attention to weld locations: look for cracks or separation at the welds. Keep in mind the powder
coating can age and crack, this normal paint cracking can be confused with structural cracking. If there is any
uncertainty with regards to cracks, contact the Pelsue service department for assistance and/or recommenda-
tions
• Ensure that the upper and lower assemblies can be separated and folded as intended. Inability, or di󰀩culty
in folding the structure as intended may be indicative of structural damage. If the unit fails to fold or stow as
intended remove the product from service and investigate further.
• Likewise, the rear locking bar should fold up and down easily, binding of the locking bar may also indicate a
structural deciency. Also, the locking bar is a load-bearing component of the LG5 system. The locking bar
must be able to be fully lowered and locked into place for product compliance.

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018 Page 19
6.3 - Inspection Log
   
Points Overall Structure Notes
Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Place a check (¥)in the box if item is acceptable, place an x (X) in the box if item requires maintenance or repair

:

:
Date Purchased
:
#LG5

#500995-001 - Product Manual: #LG5 Series Manhole Guard Retrieval System - Revision 06 - Date: 01-09-2018
Page 20
6.3 - Inspection Log (continued)
   
Points Overall Structure Notes
Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) : Inspector (print & sign) :
3
5
6
Figure #8.1a
Mounting Platform Installation