Pentax E30 - Optio Digital Camera User manual

1
Check that your camera comes complete with the items listed below.
Checking the Contents of the Package
Camera
Optio E30
Strap
O-ST62
Dock insert
O-DI62
Software(CD-ROM)
S-SW62
USB/AV cable
I-UAV62
Two AA
alkaline batteries
Operating Manual
(CD-ROM)
Quick guide
(this guide)
JA
EN
DE
FR
IT
ES
NL
SV
TC
SC
01
_
kb438
_
qg
_
e
_
7
.
fm
Page
1
Monday
,
January
22
,
2007
1:41
PM

2
Names of Parts and Monitor
Indications
Shutter release button
Flash
Self-timer lamp (red)
Lens
Power swich
Front
4/Wbutton
Four-way controller
Qbutton
Zoom/w/x/f/ybutton
Green/ibutton
3button
LCD monitor
Back
Access lamp
In this Quick Guide, the
arrow keys to be pressed
are expressed as
indicated on the right.
01
_
kb438
_
qg
_
e
_
7
.
fm
Page
2
Monday
,
January
22
,
2007
1:41
PM

3
1Preparing the Camera for Use
Prepare your camera for use before you begin using it.
QAttaching the Strap
Attach the strap supplied with the camera as shown in the illustration.
QInstalling the Batteries and SD Memory Card
Install the batteries and SD Memory Card as shown in the illustration.
Battery/card cover
Battery
SD Memory Card
01
_
kb438
_
qg
_
e
_
7
.
fm
Page
3
Monday
,
January
22
,
2007
1:41
PM

4
2Turning the Camera On
QPress the power switch.
The camera turns on and is ready to take still pictures. Press the power
switch again to turn the camera off.
QSetting the Language, Date and Time
The language selection screen appears when the camera is turned on
for the first time. Select the desired language and then set the date and
time.
1Use the four-way controller
(2345) to choose the display
language.
2Press the 4button.
Memo
• If you accidentally select another language,
refer to the Operating Manual (p.32) to set the desired language again.
1Press the four-way controller (5)
to select [mm/dd/yy], then use the
four-way controller (23) to choose
the date display style.
MENU
Cancel OK
OK
Date Adjust
MENU
Cancel
Date Style mm dd yy
Date 01/01/2007
Time 0:00
OK
// 24h
OK
01
_
kb438
_
qg
_
e
_
7
.
fm
Page
4
Monday
,
January
22
,
2007
1:41
PM

5
2Press the four-way controller (5) to select [24h], then use the
four-way controller (23) to select [24h] (24-hour display) or
[12h] (12-hour display).
3Press the four-way controller (5), then press the four-way
controller (3) to move the frame to [Date].
4Press the four-way controller (5) to select [01] (month), [01]
(date) or [2007] (year), then use the four-way controller (23)
to set the date to the current day.
5Press the four-way controller (5), then press the four-way
controller (3) to move the frame to [Time].
6Press the four-way controller (5) to select [0] (hour) or [00]
(minute), then press the four-way controller (23) to set the
time to the current time.
7Press the 4button.
QFormatting an SD Memory Card
Use this camera to format (initialize) an SD Memory Card that is unused
or has been used on another camera or digital devices.
Caution
• Be aware that formatting will delete all the data stored in the SD Memory Card.
Before formatting, save the data stored in the SD Memory Card to a PC. Refer
to the PC Connection Manual for information on how to save the data to a PC.
1Press the 3button, then press the four-way controller
(45) to display [uSetting] menu.
2Press the four-way controller (23) to select [Format], then
press the four-way controller (5).
3Press the four-way controller (23)
to select [Format], then press the
4button.
Format
All data deleted
Format
Cancel
OK
OK
OK
OK
01
_
kb438
_
qg
_
e
_
7
.
fm
Page
5
Monday
,
January
22
,
2007
1:41
PM

6
3Taking Pictures
QMonitor indications
Following indications are displayed in the Still Picture Capture
Mode
Battery Level Indicator
You can check the battery level by the windicator on the LCD monitor.
Screen Display Battery Status
w(green) Adequate power remains.
x(green) Batteries are running low.
y(yellow) Batteries are running very low.
z(red) Batteries are exhausted.
[Battery depleted] The camera will turn off after this message appears.
03/03/2007
03/03/2007
14:25
14:25
+1.0
+1.0
38
38
12
1
2
6
3
8
9
11
7
4
5
10
1Shooting mode
2Flash mode
3Drive mode
4Focus mode
5Camera shake icon
6Digital zoom icon
7Memory status
8Remaining image storage
capacity
9Battery indicator
10 Focus frame
11 EV compensation
12 Date and time
Normal display in the Still Picture Capture Mode
01
_
kb438
_
qg
_
e
_
7
.
fm
Page
6
Monday
,
January
22
,
2007
1:41
PM

7
QTaking Pictures
Aim the camera at the subject, then press the shutter release
button. The flash will fire automatically depending on the lighting
conditions.
1Frame the subject using the focus frame on the LCD monitor.
2Use the Zoom/w/xbutton to change the captured area.
3Press the shutter release button halfway.
The focus frame on the LCD monitor turns green if the subject is in
focus.
4Press the shutter release button
fully.
The picture is taken.
wx
widens the area that is
captured by the camera
enlarges the subject
03/03/2007
03/03/2007
38
38
14:25
14:25
01
_
kb438
_
qg
_
e
_
7
.
fm
Page
7
Monday
,
January
22
,
2007
1:41
PM

8
QSelecting the Flash Mode
Each time you press the four-way controller (4), the flash mode
switches between the following modes.
Memo
• For details, refer to the Operating Manual (p. 69).
QSelecting the Drive Mode
Each time you press the four-way controller (2), the drive mode
switches between the following modes.
Memo
• You can select Z(Self-timer (2 sec.)). Select g(Self-timer (10 sec.)) first,
then press the four-way controller (35).
• Continuous shooting function is not available when the shooting mode is set
to A, A, C, Yor y.
• For details, refer to the Operating Manual (p. 61-62).
,Auto
aFlash Off
bFlash On
cAuto + Red-eye
dFlash On + Red-eye
Auto
Auto
Auto
Flash Mode
Flash Mode
Flash Mode
OK
OK
OK
OK
9Standard (single frame)
gSelf-timer (10 sec.)
1Continuous Shooting
Drive Mode
Drive Mode
Continuous Shooting
Continuous Shooting
OK
OK
OK
01
_
kb438
_
qg
_
e
_
7
.
fm
Page
8
Monday
,
January
22
,
2007
1:41
PM

9
QSelecting the Focus Mode
Each time you press the four-way controller (5), the focus mode
switches between the following modes.
Memo
• For details, refer to the Operating Manual (p. 67).
=Standard
qMacro
sInfinity
\Manual Focus
Focus Mode
Focus Mode
Focus Mode
Standard
Standard
Standard
OK
OK
OK
OK
Selecting a Shooting Mode
You can choose the right mode for your particular situation from the
Capture Mode Palette.
Memo
• A shooting mode guide appears when the green button is pressed after the
shooting mode is chosen.
OK
MENU
Landscape
Landscape
Landscape
OK
OK
Guide
Guide
Guide OK
Press to
display the
Capture Mode
Palette.
Use the four-
way controller
(
2345 ) to
choose a
shooting mode,
then press the
4 button.
01
_
kb438
_
qg
_
e
_
7
.
fm
Page
9
Monday
,
January
22
,
2007
1:41
PM

10
4Playing Back Images
You can play back the images taken on the LCD monitor.
QPlaying Back Images
1Press the Qbutton after taking a
picture.
The image appears on the LCD monitor.
Memo
• To playback the previous or next image, press the four-way controller (45).
• Pressing fon the Zoom/f/ybutton simultaneously displays 9 thumbnail
images. If you press fagain while the thumbnail images are displayed, you
can switch to folder display. For details, refer to the Operating Manual (p. 90-
91).
QDeleting Images
Deleting a Single Image
You can delete a single image currently displayed on the LCD monitor.
1Playback the image you want to delete.
2Press the ibutton.
The confirmation screen appears.
3Use the four-way controller (23) to select [Delete].
4Press the 4button.
03/03/2007
03/03/2007
14:25
14:25
100-0038
100-0038
Delete
Cancel
100
100
-0038
0038
100-0038
OK
OK
OK
All Images/Sounds
All Images/Sounds
OKAll Images/Sounds
01
_
kb438
_
qg
_
e
_
7
.
fm
Page
10
Monday
,
January
22
,
2007
1:41
PM