Pentax ESPIO 115V User manual

8
ENGLISH

9
English
Congratulations on your purchase of the PENTAX
and welcome to the world of Pentax zoom
compact photography! Your compact, light weight camera
is a great companion to preserve your favorite memories.
• Please read this manual carefully before operating the
camera to take consistently superior pictures.
• Pay special attention to the cautions and notes in this
Operating Manual. Pictures and illustrations shown
herein may differ from the camera’s actual appearance.
• Illustrations in this operating manual are the DATE
MODEL.
qStrap lug (p. 14)
wMain switch (p. 16)
eShutter release button (p. 16)
rLCD panel
tFlash mode button (P. 23)
ySelf-timer/AF infinity-landscape button (p. 25, 26)
uMid-roll rewind button (P. 22)
iBuilt-in flash
oViewfinder window
!0 Zoom lens
!1 Autofocus window
!2 Self-timer lamp (P. 25)
!3 Light sensor window
!4 Back cover release lever (p. 21)
!5 Viewfinder eyepiece (p. 19)
!6 Zoom lever
!7 Film information window
!8 Battery chamber cover
!9 Tripod socket (p. 25)
@0 Back cover
@1 Green lamp (p. 20)
NAMES OF WORKING PARTS (Fig. 1)
For customers in Canada
This class B digital apparatus meet all require-
ments of the Canadian interference-Causing
Equipment Regulations.

10
TABLE OF CONTENTS
Names of working parts .............................................. 9
For safe use of your camera ......................................11
Precautions for your camera ......................................12
Precautions for battery usage ....................................13
PREPARATIONS BEFORE TAKING
PHOTOGRAPHS
Strap attachment ....................................................... 14
Installing/Replacing battery........................................ 14
Battery exhaustion warning ....................................... 14
Date model..................................................................15
Main switch and battery check ...................................16
Holding the camera.....................................................17
Operating 38-115mm zoom lens ................................17
TAKING PHOTOGRAPHS
Film loading ................................................................18
Viewfinder displays and Green lamp indications ........19
Taking pictures ...........................................................20
Unloading film..............................................................21
Focus-lock shooting ....................................................22
Hard-To-Autofocus Subjects........................................23
TAKING BETTER PHOTOGRAPHS
How to select the Exposure, AF and Flash Modes ....23
1. AUTO MODE ..........................................................24
2. AUTO MODE/red-eye reduction LED light
with flash.................................................................24
3. AUTO MODE/daylight-sync shooting
(Flash-ON)...............................................................24
4. Taking pictures at a slow shutter speed .................25
qSlow Shutter Speed with Flash-OFF ..................25
wSlow-Speed-Sync Shooting with
red-eye reduction flash .......................................25
Self-timer photography................................................25
Infinity-landscape shooting..........................................26
Specifications..............................................................27

11
English
FOR SAFE USE OF YOUR CAMERA
Although we have carefully designed this camera for safe operation, please be sure to follow precautions
given in this page.
WARNING This mark indicates precautions that if not followed, could result in serious
injury to the operator.
CAUTION This mark indicates precautions that, if not followed, could result in minor or
medium injury to the operator or damage to the equipment.
WARNING
• The electric circuits inside the camera contain high
voltage working parts. Never attempt to disassemble
the camera yourself.
• Never touch internal parts of the camera if they
become exposed from dropping the camera or for
some other reason, as there is danger of electric
shock.
• Wrapping the strap around your neck is dangerous.
Make sure that small children do not get the strap
caught around their neck.
• Be sure to store batteries out of the reach of children.
Seek medical assistance immediately if accidentally
swallowed.
CAUTION
• Do not use the flash near anyone’s eyes, as it may hurt
them. Be particularly careful with the flash around the
infants.
• Never try to disassemble, short or recharge the battery.
Also, do not dispose of the battery in fire, as it may
explode.
• Remove the battery from the camera immediately if it
becomes hot or begins to smoke. Be careful not to
burn yourself during removal.

12
PRECAUTIONS FOR YOUR CAMERA
Precautions when taking pictures
• Do not use the camera where it may come in contact
with rain, water or any other liquid, because the cam-
era is not weather, water, or liquid resistant. Should the
camera get wet from rain, splashing water, or any other
liquid, wipe it off immediately with a dry soft cloth.
• Do not drop the camera or allow it to hit a solid object.
If the camera suffers a severe shock or impact, take it
to a Pentax service center for inspection.
• Be careful not to subject the camera to strong vibra-
tions, shock or pressure. Use a cushion to protect the
camera when carrying it in a motorcycle, car, boat, etc.
• Condensation on the interior or the exterior of the cam-
era may be extremely harmful to the camera mecha-
nism as it may cause rust and/or corrosion.
Furthermore, if the camera is taken from warm tem-
perature to a subfreezing one or vice versa, the forma-
tion of icelets may cause damage. In such a case, put
the camera into a case or plastic bag so that any
change in temperature difference is minimized. Do not
remove it from the bag until temperature has stabilized.
Precautions for storage
• Avoid leaving the camera for extended periods in
places where temperature and humidity are high such
as in a car.
• Do not store the camera in a closet with mothballs or in
a case where chemicals are handled. Store it in a place
with good air circulation to prevent fungus growth.
Precautions for proper care
• Use a blower and lens brush to remove dust accumu-
lated on the lens or the viewfinder window.
• Never use solvents such as paint thinner, alcohol or
benzene to clean the camera. To clean the external
camera surfaces, - but not glass surfaces; using a dry
or silicone-treated cloth is recommended.
Other precautions
• The temperature range at which this camera functions
properly is 50˚ to -10˚C (122˚F to 14˚F).

13
English
• To maintain optimum performance, it is recommended
that the camera be inspected every one or two years.
If the camera has not been used for an extended peri-
od, or is being prepared for an important photographic
session, it is recommended that you have the camera
inspected or test shoot with it.
• The PENTAX warranty provided only for the repair of
defects in materials or workmanship. Damage of any
kind cannot be repaired at no charge under the term of
the warranty. If the difficulty is caused as a direct result
of the product being used in conditions as out lined in
the other operation contrary to the instructions outlined
in this manual, charges will be assessed or a repair
quotation will be provided.
• Do not apply force to the zoom lens; do not place the
camera with lens facing downward.
• Dirt, mud, sand, moisture, toxic gas, water, salt water,
etc., penetrating the inside of the camera may cause
damage or render it inoperable.
Damage of any kind will not be repaired under the
terms of warranty and charges may be assessed.
Therefore, handle the camera with great care.
PRECAUTIONS FOR
BATTERY USAGE
• Misuse of a battery can cause hazards such as leak-
age, overheating, explosions, etc. The battery should
be inserted with the “+” and “-” sides facing correctly.
• Never try to disassemble, short or recharge the battery.
Also do not dispose of the battery in a fire, as it may
explode.
• Battery performance may be temporarily hindered in
low temperatures, but will recover in normal tempera-
tures.
• Keep a spare battery on hand for replacement conve-
nience when shooting outdoors or while traveling.
• When the camera is in a bag, make sure the main
switch is set at the OFF position. Otherwise, battery
power may be wasted if the shutter release button is
accidentally pushed.
• Be sure to keep the battery out of the reach of children.

14
Fit the strap on the camera as illustrated. (Fig. 2)
• Use the illustrated Apart of the strap for opening the
battery chamber cover, adjusting the data on the Date
model, or pushing the mid-roll rewind button to rewind
a film before exposing all frames.
Ensure that the power is off before replacing the
battery.
1. Open the battery chamber cover by pulling the
cover lock in the direction of the arrow with the
strap clamp’s protrusion. (Fig. 3-1)
2. Insert one lithium battery (CR123A or the equiva-
lent) with the plus/minus (+/–) sides matching the
indications in the battery compartment. (Fig. 3-2)
3. Close the battery chamber cover. Ensure that the
cover is locked with a click. (Fig. 3-3)
INSTALLING/REPLACING BATTERY
STRAP ATTACHMENT
PREPARATIONS BEFORE TAKING
PHOTOGRAPHS
• If the battery is loaded correctly, the zoom lens moves
slightly and the motor operates for a few seconds.
• On the DATE MODEL, the data is initialized when the
battery chamber cover is opened. After opening the
battery chamber cover, correct the data. See page 15.
Use one 3 V lithium battery (CR-123A or DL-123A)
When the battery is nearly exhausted, the battery sym-
bol ( ) appears on the LCD panel to warn you.
Replace the battery as soon as possible. When ( )
starts blinking, no operations can be performed.
Battery life (using 24-exposure film rolls):
Approx. 15 rolls when 50% of the time uses flash (using
the CR123A battery and under Pentax testing condi-
tions). Actual battery life/performance may vary drasti-
cally depending on usage of Power Zoom, Flash and
external conditions such as temperature and freshness
of the battery.
BATTERY EXHAUSTION WARNING

15
English
If you purchased the DATE model, read this section.
Notes:
• The data on the LCD panel will be imprinted on the film.
• “----” indicates no data will be imprinted.
• “M” on the LCD panel indicates “Month”.
• The DATE model records dates up to the year 2049 on
pictures.
Switching the Mode
Depress the DATE button qwith your finger, the mode
on the LCD panel switches as shown in the chart.
qwe
DATE MODEL Correcting the date
Use the strap clamp’s protrusion to depress the
SELECT and ADJUST buttons.
1. To select the category of digits that you want to
change, depress the SELECT button wrepeated-
ly until the digits on the LCD panel that wish to
change begin to blink.
2. Depress the ADJUST button eto change digits of
the specified category you chose with the
SELECT button w. Digits increase by one each
time you depress the ADJUST button e. Holding
down the button will advance digits continuously.
3. After the data has been adjusted, depress the
SELECT button w. The bar mark ( - ) appears on
the LCD panel, indicating that data imprinting
choices are possible.
• The blinking “ : ” allows precise fine-tuning of the inter-
nal clock to the beginning of a specified minute. To do
so, depress the DATE button quntil “Day-Hour-
Minute” digits appear and then depress the SELECT
button wto make the “ : ” blink. Then depress the
ADJUST button ein sync with a time signal.
• If you release the shutter while the blinking data is
being corrected, the data cannot be imprinted.
Year Month Day
Day Hour Minute
Month Day Year
-- -- -- (blank)
Day Month Year

MAIN SWITCH
Push the main switch button to switch ON. The lens
extends slightly and the LCD panel is now on. To switch
OFF, push the main switch button again.
•If the camera is ON and left unused for over 3 minutes,
the lens automatically retracts and the power is turned
off to save the battery.
•Use one 3V lithium battery, type CR123A or the equiv-
alent. Do not remove the battery before it is exhausted.
If the battery is removed, the data on the DATE
MODEL is initialized.
BATTERY CHECK
After you turn the main switch ON, the lens slightly
extends and the lens cover opens.
•When the battery exhaustion symbol ( ) appears
on the LCD panel.
When the main switch button is depressed, the power
turns ON. When the power turns ON, the lens extends
slightly for opening the lens cover. (Fig. 4)
•If the camera is ON and left unused for over 3 minutes,
the lens automatically retracts.
MAIN SWITCH AND BATTERY CHECK
16
Operational precautions
•As you release the shutter, the bar ( - ) mark on the dis-
play blinks for a few seconds, indicating the data has
been imprinted.
•If there is a white or yellow object in the corner of the
picture where the data is imprinted, the data may be
difficult to read. When composing your photographs,
try to avoid brightly-colored subjects in that corner.

17
English
1. Keep the camera as still as possible and steady it
against your face. Depress the shutter release
button gently. (If too much force is applied, the
camera is likely to shake, and the picture will be
blurred.) Try to brace your elbows against a sta-
ble, stationary object such as a wall. (Fig. 5)
2. When using the flash with the camera positioned
vertically, hold the camera so that the flash is
above the lens.
3. Make sure not to obstruct the autofocus window,
lens, light sensor window or the built-in flash with
your fingers, hair or other object.
Note:
•Do not hold the zoom lens because it moves back and
forth while in operation.
HOLDING THE CAMERA
When you move the zoom lever to the right ( ), the
lens moves towards the 115mm telephoto setting and
frames the subject more closely. When you move the
zoom lever to the left ( ), the lens moves towards the
38mm wide-angle setting. (Fig. 6)
Notes:
•The shutter cannot be released while the lens is zoom-
ing.
•Do not apply force to the zoom lens as doing so caus-
es damage to the camera.
Never place the zoom lens with the front side facing
downward.
OPERATING 38-115mm ZOOM LENS

18
Ensure the main switch is ON before loading the film.
1. Slide the back cover release lever down in the
direction of the arrow to open the back cover.
(Fig. 7-1)
2. Place the film cartridge in the film chamber by fit-
ting its flat side on the top of the rewind shaft first
and then slide the top end of the film cartridge
into the camera. (Fig. 7-2)
3. Pull the film leader out far enough from the car-
tridge to reach the take-up spool. Align the tip of
the film with the film leader end mark q. [FILM].
(Fig. 7-3)
Make sure the film is placed between the top and
bottom guides properly.
4. Close the back cover. The film automatically
advances to the first frame. (Fig. 7-4)
FILM LOADING
TAKING PHOTOGRAPHS Notes:
•If there is dirt on the film detector w, the film cannot be
wound properly.
•Ensure the film is taut as illustrated on the illustration
below. Take up any slack in the film by pushing it back
into the cartridge.
5. ( ) appears in the exposure counter on the LCD
panel when the film is loaded properly. (Fig. 7-5)
6. ( ) appears in the exposure counter on the LCD
panel, it means that the film is not loaded properly.
In this case, open the back cover and load the film
once again. (Fig. 7-6)
•If the main switch is turned OFF when the film is
loaded properly, the number of exposure on the LCD
panel will remain on for approx. 5 seconds.
•If the main switch is turned OFF when the film is not
loaded properly, ( ) in the exposure counter on the
LCD panel disappears instantly.
Slack No!
Flat Yes!

19
English
Automatic film speed setting
This camera is designed to use DX-coded films with ISO
rating at 100 and 400. When any of these films are
loaded, the proper film speed is automatically set for the
camera.
Notes:
•Use of negative color film (print film) is recommended.
•Non-DX coded film cannot be used. If non-DX coded
film is used, the camera set the film speed to ISO 100.
•A film with ISO 400 film speed is recommended to get
less image blur and to cover more photographic situa-
tions.
qAutofocus frame
Focus on the subject with this frame.
wClose distance compensation frame
When the camera-to-subject distance is less than 1m,
compose the scene within this frame.
ePicture areas
When taking a normal picture, compose the scene
within this frame.
VIEWFINDER DISPLAYS AND
GREEN LAMP INDICATIONS
q
ee
ee
ww

20
Shooting range 0.8m (2.6ft) to ∞infinity
Turn the power on by depressing the main switch button.
(Fig. 8-1)
1. After zooming the lens and composing your
scene, focus on the subject with autofocus frame.
(Fig. 8-2)
•When the main subject is off the autofocus frame in the
center of the viewfinder, use the focus-lock technique.
See page 19.
2. Checking the lamp indication (Fig. 8-3)
When the subject is in focus, the green lamp will light
up.
•The green lamp blinks if the subject is less than 0.8m
(2.6ft) or the flash is being charged.
3. Shooting
Depress the shutter release button fully. The film
automatically advances to the next frame.
•If the autofocus window is dirty, the autofocus may not
function properly.
•If you wish to focus on another subject, lift your finger
from the shutter release button and depress the shut-
ter button halfway down again.
TAKING PICTURES
Green lamp indications
When you depress the shutter release button halfway
down, the green lamp lights up or blinks.
Lighting up:
When the subject is in focus and the flash is fully
charged, the green lamp will light up to indicate that you
can take a picture.
Blinking:
If either the camera-to-subject distance is less than 0.8m
(2.6ft) or the flash is being charged, the green lamp
blinks and you cannot release the shutter.
•While the lamp is blinking, shutter cannot be released.
•Ensure that the lamp is lit continuously, before taking
pictures.
Lighting up Blinking

21
English
Automatic Flash Emission
When the shutter release button is depressed halfway
down in low light, the flash is automatically charged and
the green lamp lights up and () will appear to ( ) on
the LCD panel indicating the flash is ready to discharge.
•The automatic flash emission is set automatically when
the main switch is ON.
Flash effective ranges (Color negative film used)
ISO 100 400
Lens
38mm ( ) 0.8-3.9m 0.8-7.9m
(2.6-13ft) (2.6-26ft)
115mm ( ) 0.8-1.4m 0.8-2.8m
(2.6-4.6ft) (2.6-9.2ft)
1. Rewinding the film (Fig. 9-1)
After you have exposed the last frame of the roll, the
lens retracts and the film rewinds automatically.
Then, the motor stops, and ( ) blinks for approx. 5
seconds to indicate that the film has been rewound
completely.
And the power will turn OFF automatically.
•If you turn the main switch ON before removing the
film, ( ) blinks and the shutter cannot be released.
2. Unloading film (Fig. 9-2)
Open the back cover, and remove the film cartridge
from the chamber by pulling the top out first with your
finger.
Notes:
•Never open the back cover until the whole film roll is
rewound completely.
•A24-exposure roll of film takes about 20 seconds to be
rewound.
•The shutter may be released one or two frames even
after the specified number of frames have been used
up as indicated by the number of shots shown on the
film cartridge. If this occurs, these extra frames may be
lost in processing.
UNLOADING FILM

22
If you shoot without positioning the autofocus frame
( ) on the main subject, only the foreground will be in
focus. When the main subject is off the autofocus frame
in the center of the viewfinder, use the focus-lock tech-
nique. (Focus lock is the function to lock focus.)
1. Focus on the subject with the autofocus frame
( ). (Fig. 11-1)
2. When the shutter release button is depressed
halfway down, the green lamp lights up and the
exposure and focus are temporarily locked. (Fig.
11-2)
3. While depressing the shutter release button
halfway, re-aim the camera or recompose the pic-
ture, then release the shutter. (Fig. 11-3)
Note:
•You can cancel focus lock simply by lifting your finger
from the shutter release button.
FOCUS-LOCK SHOOTING
Rewinding the film in mid-roll (Fig. 10)
If you wish to unload a film before exposing all the
frames, push the mid-roll rewind button with the protru-
sion part of the strap clamp.
•The lens retracts and then film rewinding starts.
•When rewind is completed, the motor stops, and, ( )
blinks for 5 seconds, indicating that the back cover may
be opened safely.

23
English
The autofocus system is highly precise, but not perfect.
Some subjects may not focus as you wish. In this case,
use the focus-lock technique. Subjects which may fool
the autofocus system include:
a) Black or very dark objects, which don’t reflect much
light.
b) Subjects with horizontal lines, complex or detailed
patterns.
c) Flickering light sources such as neon signs, fluores-
cent lamps, TV images, sunlight coming through
trees, etc. and subjects illuminated by these light
sources.
d) Glossy and reflective surface like glass, mirror, car
bodies, etc.
e) Fast moving subjects.
f) Water jets, water surface, smoke, flame, fireworks,
etc. which have no distinct or consistent form, or a
subject in mist.
HARD-TO-AUTOFOCUS-SUBJECTS TAKING BETTER PHOTOGRAPHS
Turn the power on by depressing the main switch button.
To set various exposure modes, depress the flash
mode button q.
The mode selection will change each time that the flash
mode button in depressed.
HOW TO SELECT EXPOSURE,
AF AND FLASH MODES
q
w
Auto
Auto flash ON
Red-eye
reduction OFF
Auto
Auto Flash ON
Red-eye
reduction ON
Auto
Daylight-Sync
Red-eye
reduction OFF
Slow speed
Flash OFF Slow speed Flash ON
Red-eye
reduction ON

24
Turn the main switch ON to set this mode. (Fig. 12)
In this mode, the camera controls exposures automati-
cally for bright and dark condition with automatic flash
emission.
Depress the Flash mode button until ( ) appears on
the LCD panel. (Fig. 13)
Same as 1. Auto mode, with automatic flash emission
and the red-eye reduction flash.
Depress the Flash mode button to set the arrow mark on
the LCD panel to ( ). (Fig. 14)
In this mode, the flash will discharge in both dark and
bright conditions. When a portrait is taken with the sub-
ject in a backlight situation, the front of the subject may
be cast in shadow. In such a case, use the Daylight-sync
shooting mode (Flash-ON) within the flash effective
range to take pictures. This will ensure that a subject is
well exposed without any shadow. When you wish to dis-
charge the flash as a fill-in, use this mode. In this mode,
the flash will always discharge.
Note:
•Make sure you’re within the flash effective range even
when you use the built-in flash as a fill-in flash in daylight.
3. AUTO MODE/ DAYLIGHT-SYNC (FLASH ON)
2. AUTO MODE/red-eye reduction flash
1. AUTO MODE
To set various shooting modes, depress the Self-
timer/AF infinity-landscape button w.
•For normal use, use the Single-Frame Shooting Mode.
Red-Eye Reduction Flash Function
To reduce the red-eye phenomenon in the picture,
depress the flash mode button until ( ) appears. With
this mode, the self-timer lamp lights up for approx.1 sec-
ond just before the flash is discharged to reduce the
appearance of the red-eye effect. To cancel this mode,
depress the flash mode button to set to auto mode.
Single-Frame
Shooting Self-Timer Shooting Infinity-Landscape shooting

25
English
qSlow Shutter Speed with Flash-OFF (Fig. 15)
Depress the Flash mode button to set the arrow mark on
the LCD panel to ( ) ( ).
In this mode, the flash does not discharge, and a picture
is taken at a slow shutter speed up to approx. 2 seconds.
Use it in places where flash photography is prohibited,
such as in theaters and museums. Furthermore, this
mode is also useful for a natural existing light effect in
low ambient photography.
wSlow-Speed-Sync with red-eye-reduction flash
(Fig. 16)
Depress the Flash mode button to set the arrow mark on
the LCD panel to ( ), ( ), and ( ) appears on the
LCD panel.
It is possible to photograph subjects and back-ground in
a balanced way by using the flash to properly expose the
foreground subject and a slow-speed to expose the low
light background.
Notes:
•When shooting in low light, the shutter speed gets
slower, and camera shake is likely to blur your picture.
Use of a tripod is recommended.
•Make sure you are within the flash effective range even
when you use the flash as a fill-in flash in daylight. See
page 19.
4. TAKING PICTURES AT A SLOW SHUTTER SPEED
Self-timer
Use the self-timer if you wish to get in the picture. Use of
a tripod is recommended.
1. Depress the Self-timer/AF infinity-landscape but-
ton to set the arrow mark on the LCD panel to
( ). (Fig. 17-1)
2. Assure that the subject is within the AF frame in
the viewfinder. Depress the shutter release button
fully to start the self-timer. (Fig. 17-2)
The shutter will be released in about 10 seconds. When
the Self-timer is working, the arrow mark () blinks on
the LCD panel, and the Self-timer lamp lights up. The
lamp starts blinking 3 seconds before the shutter is
released.
To cancel the self-timer
To cancel the self-timer at any time after it’s been acti-
vated, depress the main switch button.
•If you are standing directly in front of the camera when
starting the Self-Timer, the camera will be focused to
you, not the main subjects. Be sure that you are
behind, or next to the camera when starting the Self-
Timer.
•If you wish to use the flash with the self-timer, ensure
that the arrow mark on the LCD panel appears and
points to ( ) indicating the flash has been charged
before operating the self-timer.
SELF-TIMER PHOTOGRAPHY

26
When you wish to take a sharp picture of a distant land-
scape or a distant subject through a window, the Infinity-
landscape mode allows you to capture distant scenery
with clarity.
Depress the Self-timer/AF infinity-landscape button to
set the arrow mark on the LCD panel to ( ). (Fig. 18)
•The green lamp will light up when the shutter release
button is depressed halfway down in this mode.
•This mode will be canceled after the picture is taken
automatically.
•In this mode, the flash will not discharge on auto mode.
INFINITY-LANDSCAPE SHOOTING

27
English
SPECIFICATIONS
Type: 35mm fully automatic lens-shutter with built-in zoom lens and auto flash.
Film: Auto film speed setting with 35mm perforated DX-coded film with ISO rating at 100 &
400. Non-DX coded films are set to ISO100
Format: 24 x 36mm.
Film loading: Auto film loading. Closing the back cover will automatically wind the film to first frame.
Film winding: Auto film-winding (single-frame).
Film rewinding: Auto film rewinding at the end of roll. Auto stop upon completion of rewinding.
Rewinding time: approx. 20 sec. with 24-exposure film. Rewinding in mid-roll provided.
Frame number: Automatic readout of successive frame numbers in ascending order when shooting, and
descending order when rewinding.
Lens: Pentax power zoom 38-115mm f/4.3-12.2, 5 elements in 5 groups, Angle of view: 59˚-
21.5˚.
Focusing system: Pentax infrared active autofocusing with focus lock. Range: 0.8m (2.6ft) - infinity, maxi-
mum magnification: approx. 0.17x. Infinity-landscape mode (focus is fixed to infinity).
Zooming: Electronic zoom.
Shutter: Programmed AE electronic shutter with speed approx.1/500-2 sec. Electromagnetic
release.
Self-timer: LED lamp indication. Delay time approx.10 sec. Cancellation after activation is possible.
Viewfinder: Actual image zoom viewfinder. 83% of field of view ratio, Magnification: 0.44X (38mm
WIDE)–1.23X (115mm TELE), Diopter: -1m–1,Autofocus frame, Picture frame, Close dis-
tance correction frame, Green lamp lighting (O): possible to take a picture, Green lamp
blinking: Subject is too close and/or the flash is being charged.