PerfecTron OXY5361A User manual

Version 1.7
OXY5361A
3.5"SBCwithIntel®Skylake-USoC
www.perfectron.com

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
1
Safety Information
Electrical safety
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible, disconnect
all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all power
cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Make sure that your power supply is set to the correct voltage in your area.
If you are not sure about the voltage of the electrical outlet you are using, contact your local
power company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your local distributor.
Operation safety
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
Before using the product, make sure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots,
sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
Place the product on a stable surface.
If you encounter any technical problems with the product, contact your local distributor.
Statement
All rights reserved. No part of this publication may be reproduced in any form or by any
means, without prior written permission from the publisher.
All trademarks are the properties of the respective owners.
All product specifications are subject to change without prior notice.

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
2
Revision History
Revision
Date (dd.mm.yyyy)
Changes
V 0.9
01.06.2017
Draft
V 1.0
13.06.2017
Initial Release
V 1.1
15.06.2017
Update latest product photo
Change JP13.JP14,JP15 default setting
Change LVDS and CN18 pin define.
V 1.2
20.06.2017
Change LPC pin define
V 1.3
02.12.2020
Add LVDS VDD JP24 pin define
V 1.4
27.09.2021
Add SATA Power J6 & ATX Power CN11 pin define
V 1.5
26.10.2021
Modify Half size mPCIe slot only support mSATA
V 1.6
22.11.2021
Add COM1 pin define
V 1.7
09.02.2022
Add AMP1 pin define
Packing list
□OXY5361A 3.5” SBC
□CD (Driver + user's manual)
□Optional Accessories
Cable kit
•SATA cable
•SATA power cable
•USB cable
•COM cable
Thermal kit:
•Copper heat spreader
•Passive heatsink
If any of the above items is damaged or missing, please contact your local
distributor.

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
3
Table of Contents
Safety Information...................................................................................................................................................... 1
Electrical safety.......................................................................................................................................................... 1
Operation safety......................................................................................................................................................... 1
Statement...................................................................................................................................................................... 1
Revision History.......................................................................................................................................................... 2
Packing list..................................................................................................................................................................... 2
Chapter 1: Product Information........................................................................................................................... 4
1.1 Block Diagram...................................................................................................................................................... 4
1.2 Key Features......................................................................................................................................................... 5
1.3 Board Placement................................................................................................................................................. 6
Chapter 2: Jumpers and Connectors................................................................................................................ 7
2.1 Onboard connector and jumper list............................................................................................................. 7
2.2 Connector and jumper pin definition........................................................................................................... 8
Chapter 3: Quick Installation Guide ................................................................................................................ 14
Chapter 4: AMI BIOS UTILITY............................................................................................................................. 15
4.1 Starting................................................................................................................................................................. 15
4.2 Navigation Keys ................................................................................................................................................ 15
4.3 Main Menu........................................................................................................................................................... 16
4.4 Advanced Menu................................................................................................................................................. 17
4.5 Chipset ................................................................................................................................................................. 24
4.6 Security................................................................................................................................................................ 27
4.7 Boot Menu........................................................................................................................................................... 28
4.8 Save & Exit.......................................................................................................................................................... 28

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
4
Chapter 1: Product Information
1.1 Block Diagram
SATA

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
5
1.2 Key Features
System
CPU Type
Intel®Skylake-U series, BGA type
Intel®Core™i3-6100U (3M Cache, 2.3 GHz) (15W)
Intel®Core™i5-6300U (3M Cache, 2.4 GHz) (15W)
Intel®Core™i7-6600U (4M Cache, 2.6 GHz) (15W)
Memory Type
2 x SO-DIMM DDR4 2133 MHz up to 32 GB
BIOS
AMI®UEFI BIOS
Super I/O
Fintek F8786E
Watchdog
1-255 sec.
Expansion Slot
1 x Full-size mPCIe/mSATA
1 x Half-size mSATA
Display
Chipset
Intel®Integrated
DisplayPort
Max. resolution 4096 x 2304
LVDS
Dual channel 24bit LVDS
Display Type
DisplayPort, LVDS
Audio
Codec
Realtek ALC888 High Definition Audio Codec
Ethernet
Chipset
1 x Intel®I210-IT , 1 x Intel®I219-LM GbE LAN
(support 10/100/1000 Mbps for 2 x RJ45 ports)
WOL
Yes
Boot from LAN
Yes for PXE
Rear I/O
DisplayPort
2 x DisplayPort
Ethernet
2 x RJ45
USB
4 x USB 3.0
COM
1 x RS232
Internal I/O
SATA
1 x SATAIII (6 Gb/s)
USB
2 x USB 2.0
COM
1 x RS232/422/485
AUDIO
Mic-in, Line-out
1 x 3W amplifier (Optional)
FAN
1 x CPU fan
LVDS
30-pin connector
DIO
8bit
Mechanical and Environment
Form Factor
3.5" SBC
Power Type
9~36V DC-in, 4-pin ATX power connector, AT/ATX mode support
Dimension
146mm x 101mm (5.7" x 4")
Operating Temp.
-20 to 85°C
Storage Temp
-40 to 85°C
Relative Humidity
10% to 90%, non-condensing
Standard Compliance
Standard
Compliance
CE/FCC
OS
OS Support
Windows®10 64bit , Linux(Support by request)
*All specifications and photos are subject to change without notice.

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
6
1.3 Board Placement
JP1
CN11

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
7
Chapter 2: Jumpers and Connectors
2.1 Onboard connector and jumper list
Label
Function
COM1 (Rear)
RS232, DB9 connector
DP1 (Rear)
DisplayPort
DP2 (Rear)
DisplayPort
LAN1 (Rear)
RJ45 connector
LAN2 (Rear)
RJ45 connector
USB1/2 (Rear)
2 x USB3.0
USB3/4 (Rear)
2 x USB3.0
MPCIE1
Full-size mPCIe/mSATA
MPCIE2
Half-size mSATA
AMP1
Amplifier
LVDS
LVDS
CN18
LVDS Control Connector
CN11
ATX Power
J1
DIO header
J5
SATAIII connector
J6
SATA power
J9
Front panel
J10
LPC header
J11
Audio
J12
COM2, RS232/422/485
J13
CPU fan
J14
2 x USB2.0, USB5/6
SW1
LVDS resolution Select
JP1
Clear CMOS
JP2
COM1 RI/+5V/+12V select
JP13
AT/ATX select
JP14
mPCIE1 SATA/PCIe select
JP15
mPCIE2 SATA/PCIe select

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
8
JP24
LVDS Signal Power
2.2 Connector and jumper pin definition
2.2.1 Jumper
JP1: Clear CMOS
Jumper
Function description
Setting
1-2
Normal
2-3
Clear CMOS
Default setting: 1-2
JP2: COM1 RI/+5V/+12V
JP13: AT/ATX Mode
Jumper
Function description
Setting
1-2
ATX
2-3
AT
Default setting: 2-3
Jumper
Function description
Setting
1-2
Ring
3-4
5V
5-6
12V
Default setting: 1-2

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
9
JP14: mPCIe1 signal select
Jumper
Function description
Setting
1-2
SATA
2-3
PCIe
Default setting: 2-3
JP15: mPCIe2 signal select
Jumper
Function description
Setting
1-2
SATA
2-3
PCIe
Default setting: 2-3
JP24 LVDS Signal Power
1-2
5V
2-3
3V3
SW1: LVDS Resolution
Resolution
Color
depth
Channel
Setting
Drawing
Switch1
Switch2
Switch3
Switch4
800 x 600
18-bit
Single
On
On
On
On
Off On
1024 x 768
18-bit
Single
Off
On
On
On
1024 x 768
24-bit
Single
On
Off
On
On
1280 x 800
18-bit
Single
Off
Off
On
On
1280 x 1024
24-bit
Dual
On
On
Off
On
1366 x 768
24-bit
Single
Off
On
Off
On
1440 x 900
24-bit
Dual
On
Off
Off
On
1920 x 1080
24-bit
Dual
Off
Off
Off
On

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
10
2.2.2 Connector
AMP1
Pin
Definition
1
SP_OUTL-
2
SP_OUTL+
3
SP_OUTR+
4
SP_OUTR-
LVDS
Pin
Definition
Pin
Definition
2 30
1 29
1
LVDS_CLK+
2
GND
3
LVDS_CLK-
4
LVDSA3+
5
GND
6
LVDSA3-
7
LVDSB3+
8
GND
9
LVDSB3-
10
LVDSA_CLK+
11
LVDSB2+
12
LVDSA_CLK-
13
LVDSB2-
14
GND
15
LVDSB1+
16
LVDSA2+
17
LVDSB1-
18
LVDSA2-
19
LVDSB0+
20
LVDSA1+
21
LVDSB0-
22
LVDSA1-
23
GND
24
LVDSA0+
25
LVDS_SCLK
26
LVDSA0-
27
LVDS_SDATA
28
GND
29
VDD
30
VDD
CN11: ATX Power
PIN
DEFINITION
1
GND
2
GND
3
DC in
4
DC in

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
11
CN18: LVDS Control connector
PIN
DEFINITION
1
+12V
2
+12V
3
+12V
4
5V
5
5V
6
GND
7
GND
8
Backlight Enable
9
Backlight control
10
GND
J1: DIO
PIN
DEFINITION
1
DIO0
2
DIO1
3
DIO2
4
DIO3
5
DIO4
6
DIO5
7
DIO6
8
DIO7
9
3.3V
10
GND
J6: SATA Power
PIN
DEFINITION
1
12V
2
GND
3
GND
4
5V
J9: Front Panel
PIN
DEFINITION
PIN
DEFINITION
1
FP_HDLED+
2
FP_PLED+
3
SATALED#
4
GND
5
GND
6
EC_PWR_BTN
7
RESET-
8
GND
9

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
12
J10: LPC
PIN
DEFINITION
1
GND
2
GND
3
+3.3VSB
4
LPC_AD0
5
LPC_AD1
6
LPC_AD2
7
LPC_AD3
8
LPC_FRAME#
9
PLTRST#_BUF1
10
LPC_CLK_1
J11: Audio
PIN
DEFINITION
1
GND
2
MIC1_JD
3
MIC1_R
4
MIC1_L
5
FRONT_JD
6
FRONT_R
7
FRONT_L
8
LINE1_JD
9
LINE1_R
10
LINE1_L
COM1: RS232 with 5V/12V selectable

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
13
J12: COM2 RS232/422/485
Note: RS232/422/485 can be set by BIOS.
Pin
RS232 mode (Default)
RS422 mode
RS485 mode
1
1
5V
2
GND
GND
GND
3
RI
4
DTR
RX-
5
CTS
6
TXD
RX+
7
RTS
8
RXD
TX+
DATA-
9
DSR
10
DCD
TX-
DATA+
J14: USB2.0 x2
PIN
DEFINITION
1
+5V
2
USB5-
3
USB5+
4
GND
5
GND
6
+5V
7
USB6-
8
USB6+
9
GND
10
GND

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
14
Chapter 3: Quick Installation Guide
A default screw for usage
of Half size mSATA

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
15
Chapter 4: AMI BIOS UTILITY
This chapter provides users with detailed descriptions on how to set up a basic system
configuration through the AMI BIOS setup utility.
4.1 Starting
To enter the setup screens, perform the following steps:
Turn on the computer and press the <Del> key immediately.
After the <Del> key is pressed, the main BIOS setup menu displays. Other setup screens can
be accessed from the main BIOS setup menu, such as the Chipset and Power menus.
4.2 Navigation Keys
The BIOS setup/utility uses a key-based navigation system called hot keys. Most of the BIOS setup
utility hot keys can be used at any time during the setup navigation process.
Some of the hot keys are <F1>, <F10>, <Enter>, <ESC>, and <Arrow> keys.
Left/Right
The Left and Right <Arrow> keys moves the cursor to select a menu.
Up/Down
The Up and Down <Arrow> keys moves the cursor to select a setup
screen or sub-screen.
+− Plus/Minus
The Plus and Minus <Arrow> keys changes the field value of a
particular setup setting.
F1
The <F1> key offer general help.
F2
The <F3> key load previous values.
F3
The <F3> key load optimized defaults.
F4
The <F4> key saves any changes made and exits the BIOS setup
utility.
Esc
The <Esc> key discards any changes made and exits the BIOS setup
utility.
Enter
The <Enter> key displays a sub-screen or changes a selected or
highlighted option in each menu.

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
16
4.3 Main Menu
The Main menu is the first screen that you will see when you enter the BIOS Setup Utility.

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
17
4.4 Advanced Menu
The Advanced Menu allows you to configure your system for basic operation. Some entries are defaults
required by the system board, while others, if enabled, will improve the performance of your system or let
you set some features according to your preference.
Setting incorrect field values may cause the system to malfunction.

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
18
4.4.1 Trust Computing
4.4.2 IT8786 Super IO Configuration

OXY5361A 3.5" SBC User’s Manual V1.7
www.perfectron.com
19
4.4.2.1 Serial Port 1 Configuration
4.4.2.2 Serial Port 2 Configuration